Skip to the content
2 layers113 × 82.5 mmSolar Panels 1p25U, the printed circuit board in 3D

Solar panel PCB designs for CTS-SAT-1

Size
113 × 82.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
56
Nets
40
Pads
188
Tracks, vias
107, 24
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
15 Jan 2024
Updated
24 Sep 2025

Overview

Solar Panels 1p25U is an open-source printed circuit board by CalgaryToSpace, from the CalgaryToSpace/CTS-SAT-1-Solar-Panels repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 113 × 82.5 mm with 56 parts on 40 nets, routed with 107 tracks and 24 vias.

It is built around the KXOB25-05X3F-TB and PMEG3010EP. Its parts include 6 diodes and 4 connectors. It belongs with the power boards of this library.

Main components

2

README

README.md

CTS-SAT-1-Solar-Panels

Solar panel PCB designs for the CTS-SAT-1 (FrontierSat) 3U cubesat

Solar Panel Overview

  • 4x COTS 2U solar panels are the main power generation for the satellite. Model: NPC SpaceMind SM-SP2X.
  • As a proof of concept, the following panels are manufactured in-house (designed contained in this repo):
    • 2x 1.25U panels
    • 1x 1.0U panel

The rev3 release/tag, with PCBs manufactured by AISLER, is flown on CTS-SAT-1.

1.25U Solar Panel

  • 30 cells, in a 6S5P configuration (6 cells in each string, then joined in parallel).

1.25U Solar Panel - Top

Bill of Materials (Highlights)

  • PMEG3010EP diodes in a SOD128 package (low VF Schottky barrier rectifier)
  • AA-DUCT 902 Silver Epoxy Adhesive
  • KXOB25-05X3F solar cells
    • Nominal efficiency: 25%
    • Monocrystalline, silicon composition
    • Very cost-efficient

Solar Panel Assembly Steps

Work in the Laminar Flow Table with proper ESD protection. Wear gloves. Be careful with fragile cells.

  1. Assemble SMD solder components.
  2. Clean solar panel PCB with isopropyl alcohol (clean flux residue).
  3. Put epoxy in hot water for 10 minutes (get epoxy to around 40C, warm-to-touch).
  4. Massage epoxy in pouch, following epoxy supplier's guidelines.
  5. Get out the solar cells.
  6. Apply some epoxy to solar panel pads.
  7. Take a picture of the application for reference on future applications.
  8. Use the suction tool or hands to place solar cells on the panels. Press down on each cell.
  9. Wait 24h for epoxy to dry.

License

This project is licensed under the CERN OHL v2 Permissive license. We appreciate attribution and links back, but you are free to do what you wish with this project.

Parts

56
QtyValueFootprintReferences
30KXOB25-05X3FSolar Panel Library:KXOB25-05X3FSC1, SC2, SC10, SC11, SC12, SC13, SC14, SC15, SC16, SC17, SC18, SC19, SC20, SC21, SC22, SC23 +14
8Jumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8
8MountingHole_PadMountingHole:MountingHole_3.2mm_M3_DIN965_PadH1, H2, H3, H4, H5, H6, H7, H8
6PMEG3010EPSolar Panel Library:PMEG10020AELPXD2, D4, D6, D8, D9, D11
2Conn_01x08_MountingPinConnector_Molex:Molex_PicoBlade_53261-0871_1x08-1MP_P1.25mm_HorizontalJ1, J3
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_VerticalJ4
1Conn_01x08_MountingPinConnector_Molex:Molex_Pico-Lock_504050-0891_1x08-1MP_P1.50mm_HorizontalJ5

More from CalgaryToSpace/CTS-SAT-1-Solar-Panels

1
  • 2 layers92 × 82 mmSolar Panels 1p0U, the printed circuit board in 3D

    Solar Panels 1p0U

    CalgaryToSpace/CTS-SAT-1-Solar-Panels

    Solar panel PCB designs for CTS-SAT-1

    43 parts2CERN-OHL-P-2.0

Similar boards

  • 2 layers36.8 × 90.9 mmBwlr1e, the printed circuit board in 3D

    Bwlr1e

    teapotlaboratories/bwlr1e

    Teapotlabs BWLR1E: Wireless Environmental Sensor with Energy Harvesting from Solar Energy

    65 parts36MIT
  • 2 layers36.8 × 90.9 mmBwlr3d, the printed circuit board in 3D

    Bwlr3d

    teapotlaboratories/bwlr3d

    Teapot BWLR3D: Asset Tracker and Environmental Sensor with Solar Energy Harvesting

    108 parts18MIT
  • 2 layersATtiny board, the printed circuit board in 3D

    ATtiny board

    ivourshalldevour/bicycle_odometer

    A repository to hold all the code written for the MSP430 microcontroller I used while building my energy harvesting powered bicycle odometer.

    11 parts1GPL-3.0
  • 6 layers48.4 × 48.4 mmSolarCellX v1, the printed circuit board in 3D

    SolarCellX v1

    spacecraft-design-lab-2019/Solar-Panel-X

    14 parts
  • 2 layers90 × 38 mmLCD OLinuXino-5TS Rev.B, the printed circuit board in 3D

    LCD OLinuXino-5TS Rev.B

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    56 parts1.5k
  • 2 layers50.4 × 48.4 mmDistortion, the printed circuit board in 3D

    Distortion

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    56 parts915
  • 2 layers27 × 24.7 mmKawaiiSD, the printed circuit board in 3D

    KawaiiSD

    mackieks/Kawaii

    Tiny, beautiful metal Wii keychain

    56 parts374
  • 2 layers123.9 × 94.4 mmRoba L, the printed circuit board in 3D

    Roba L

    kumamuk-git/roBa

    56 parts363GPL-3.0

Questions

How big is the Solar Panels 1p25U PCB?

It measures 113 × 82.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Solar Panels 1p25U use?

56 parts, built around the KXOB25-05X3F-TB and PMEG3010EP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Solar Panels 1p25U KiCad files?

From the CalgaryToSpace/CTS-SAT-1-Solar-Panels repository on GitHub, at the commit this page was made from: the board is Solar_Panels_1p25U/Solar_Panels_1p25U.kicad_pcb and its schematic Solar_Panels_1p0U/Solar_Panels_1p0U.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Solar Panels 1p25U design in my own project?

Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).