Skip to the content
123

DMG1012UW

GOODWORKExtended

Part id
goodwork/DMG1012UW
Category
MOSFETs
Package
SOT-323
Pins
3
In stock
14,746 at JLCPCB (C48935695)
Used on
13 open-source boards

Overview

The DMG1012UW is a MOSFET made by GOODWORK in a SOT-323 package with 3 pins.

PCBKit's library has its KiCad symbol (corpus:DMG1012UW_4068295c, from open boards on GitHub) and its footprint (Package_TO_SOT_SMD:SOT-323_SC-70, from KiCad's library), ready for a KiCad board. 14,746 are in stock at JLCPCB (part C48935695). 13 open-source boards in 11 repositories on GitHub use it.

Symbol

1G2S3D
corpus:DMG1012UW_4068295cFrom open boards on GitHub

Footprint

123
Package_TO_SOT_SMD:SOT-323_SC-70From KiCad's library

From the datasheet

5
Drain-source, most
20 V · drain-source voltage, max · p. 1
On resistance
180 mΩ · VGS = 4.5 V, ID = 0.6 A, max · p. 2
On resistance
250 mΩ · VGS = 2.5 V, ID = 0.5 A, max · p. 2
On resistance
500 mΩ · VGS = 1.8 V, ID = 0.2 A, max · p. 2
Gate threshold
700 mV · VGS = VDS, ID = 250 uA, typical · p. 2

Pinout

3
The pins of the DMG1012UW
PinNameType
1GInput/output
2SInput/output
3DInput/output

Open-source boards using it

13See all 13
  • 12 layers55 × 40 mmArvsom, the printed circuit board in 3D

    Arvsom

    antmicro/arvsom

    System on Module based on StarFive 71x0 SoC.

    452 parts46Apache-2.0
  • 2 layers36.8 × 90.9 mmBwlr1e, the printed circuit board in 3D

    Bwlr1e

    teapotlaboratories/bwlr1e

    Teapotlabs BWLR1E: Wireless Environmental Sensor with Energy Harvesting from Solar Energy

    65 parts36MIT
  • 2 layers36.8 × 90.9 mmBwlr3d, the printed circuit board in 3D

    Bwlr3d

    teapotlaboratories/bwlr3d

    Teapot BWLR3D: Asset Tracker and Environmental Sensor with Solar Energy Harvesting

    108 parts18MIT
  • 2 layers50 × 50 mmHello, the printed circuit board in 3D

    Hello

    gavanfantom/hello-hardware

    Hardware design for hello mini badge

    56 parts3MIT
  • 4 layers51 × 31.5 mmMaru x21, the printed circuit board in 3D

    Maru x21

    donghee/maru-x21

    Pixhawk compatible autopilot based from AUAV X2.1

    196 parts
  • 4 layers99 × 90 mmLeakguard, the printed circuit board in 3D

    Leakguard

    leak-guard/hardware

    KiCad project files and schematics of LeakGuard hardware

    123 parts
  • 2 layers30.7 × 43.2 mmBob, the printed circuit board in 3D

    Bob

    orbcode/orbtrace_hw

    Orbtrace & supporting hardware circuit diagrams etc.

    55 parts30

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the DMG1012UW?

Yes. The symbol is corpus:DMG1012UW_4068295c and the footprint Package_TO_SOT_SMD:SOT-323_SC-70, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DMG1012UW?

SOT-323, with 3 pins. Its footprint is drawn on this page.

Where is the DMG1012UW datasheet?

GOODWORK publishes it: the Datasheet link on this page opens it.

Where can I order the DMG1012UW?

JLCPCB lists it as part C48935695, with 14,746 in stock; the sellers' links on this page open their listings.

What can replace the DMG1012UW?

Parts like it in the library: the CJ2101 by Jiangsu Changjing Electronics Technology (CJ), the SI1308EDL by Vishay Intertechnology, the DMP2165UW by Diodes Incorporated and the BSS816NWH6327 by Infineon Technologies. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DMG1012UW?

13 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.