
QUT Autopilot Pixracer
Heckus/QUT-OpenFCU
The primary objective is to create an alternative to the difficult-to-source off-the-shelf Pixhawk 6. This work builds upon a edited pixracer version produced by KAI (Wesley) in 2022.

Pixhawk compatible autopilot based from AUAV X2.1
Maru x21 is an open-source printed circuit board by donghee, from the donghee/maru-x21 repository on GitHub. It is a 4-layer board of 51 × 31.5 mm with 196 parts on 226 nets, routed with 2,722 tracks and 257 vias.
It is built around the STM32F100C8T6B, STM32F427VIT6 and 74LVC2G240DP, with the TJA1051TK/3, MS5611-01BA03 and LP5907 among its other parts. Its parts include 72 resistors, 60 capacitors, 24 connectors, 16 ICs and 7 diodes. It belongs with the STM32 boards of this library.
Pixhawk compatible autopilot based from AUAV X2.1
PCB assembly and program bootloader
Case assembly
Maiden flight
FMU processor: stm32f427vit6
IO processor: stm32f100c8t6
IMU sensors
Interfaces
Power Input
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 100nF | swi_dipol:C_0402 | C1, C2, C3, C11, C20, C21, C28, C30, C31, C32, C33, C34, C35, C36, C38, C39 +16 |
| 24 | 220 | swi_dipol:R_0402_NoSilk | R31, R32, R39, R40, R41, R42, R43, R44, R53, R54, R55, R56, R57, R58, R59, R60 +8 |
| 15 | 10K | swi_dipol:R_0402_NoSilk | R2, R8, R9, R12, R13, R14, R33, R45, R46, R48, R49, R50, R51, R52, R64 |
| 6 | 100K | swi_dipol:R_0402_NoSilk | R7, R16, R17, R18, R19, R20 |
| 5 | 10uF 10V | swi_dipol:C_0805 | C22, C23, C24, C25, C26 |
| 5 | 2u2F | swi_dipol:C_0603 | C12, C13, C42, C48, C50 |
| 5 | 470 | swi_dipol:R_0402_NoSilk | R1, R4, R34, R35, R38 |
| 4 | 2u2F 10V | swi_dipol:C_0805 | C14, C15, C16, C17 |
| 4 | 8pF | swi_dipol:C_0402 | C18, C19, C44, C45 |
| 4 | LP5907 | TO_SOT_Packages_SMD:SOT-23-5 | U4, U5, U6, U7 |
| 4 | MOUNTING-HOLE | Mounting_Holes:MountingHole_3.2mm_M3 | M1, M2, M3, M4 |
| 3 | 10uF 16V | swi_dipol:C_0805 | C8, C9, C53 |
| 3 | 1K | swi_dipol:R_0402_NoSilk | R15, R29, R30 |
| 3 | 1K5 | swi_dipol:R_0402_NoSilk | R37, R66, R67 |
| 3 | 1uF | swi_dipol:C_0603 | C27, C29, C47 |
| 2 | 1M | swi_dipol:R_0402_NoSilk | R25, R26 |
| 2 | 22 | swi_dipol:R_0402_NoSilk | R27, R28 |
| 2 | 220 | swi_dipol:R_0805 | R22, R23 |
| 2 | 24MHz | swi_misc:ABM8 | X1, X2 |
| 2 | 470K | swi_dipol:R_0402_NoSilk | R10, R11 |
| 2 | 47uF 16V | swi_dipol:C_0805 | C55, C56 |
| 2 | ARM Cortex JTAG 6p | swi_pads:Tag-Connect_TC2030-IDC-NL-NOHOLE | J1, J2 |
| 2 | ICM-20602 | swi_sensors:LGA-16_3x3mm_Pitch0.5mm | U12, U12 |
| 2 | RED | LEDs:LED_0603 | D1, D4 |
| 1 | 10 | swi_dipol:R_0402_NoSilk | R47 |
| 1 | 100 | swi_dipol:R_0402_NoSilk | R62 |
| 1 | 120 | swi_dipol:R_0402_NoSilk | R63 |
| 1 | 1K 1% | swi_dipol:R_0402_NoSilk | R6 |
| 1 | 1N4148WT | Diodes_SMD:D_SOD-523 | D6 |
| 1 | 200 1% | swi_dipol:R_0402_NoSilk | R5 |
| 1 | 220 | Resistors_SMD:R_Cat16-8 | RN1 |
| 1 | 220uF | Capacitors_SMD:C_1210 | C10 |
| 1 | 2K7 | swi_dipol:R_0402_NoSilk | R24 |
| 1 | 47 | swi_dipol:R_0402_NoSilk | R36 |
| 1 | 470nF | swi_dipol:C_0603 | C46 |
| 1 | 74LVC2G240 | Housings_SSOP:TSSOP-8_3x3mm_Pitch0.65mm | U14 |
| 1 | AIR | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J12 |
| 1 | AUX-ADC1 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J13 |
| 1 | AUX-ADC2 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J14 |
| 1 | BAS70-02V | Diodes_SMD:D_SOD-523 | D2 |
| 1 | BLUE | LEDs:LED_0603 | D5 |
| 1 | BRICK | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J3 |
| 1 | BUZZ | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J11 |
| 1 | CAN | Connectors_JST:JST_GH_SM04B-GHS-TB_04x1.25mm_Angled | J19 |
| 1 | CH1-3 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J9 |
| 1 | CH4-6 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J10 |
| 1 | DMG1012UW | TO_SOT_Packages_SMD:SOT-323_SC-70 | Q2 |
| 1 | DNP | swi_dipol:R_0805 | R21 |
| 1 | DORCA30 | swi_housings_qfp:QFN-24_4x4mm_Pitch0.5mm | U9 |
| 1 | FM25V02A-G | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U8 |
| 1 | GPS/I2C | Connectors_JST:JST_GH_SM06B-GHS-TB_06x1.25mm_Angled | J22 |
| 1 | GREEN | LEDs:LED_0603 | D3 |
| 1 | IO_CHANNELS | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J5 |
| 1 | LOGO | swi_logos:subak | G*** |
| 1 | LOGO | swi_logos:subakio | G*** |
| 1 | LTC4415 | Housings_SSOP:MSOP-16-1EP_3x4mm_Pitch0.5mm | U1 |
| 1 | MPU-9250 | swi_sensors:QFN-24_3x3mm_Pitch0.4mm_large_pads | U15 |
| 1 | MS5611-01BA03 | swi_sensors:ms5611-01ba03 | U10 |
| 1 | Micro_SD_Card | swi_sdcard:DM3CS-SF | J4 |
| 1 | OPEN_HARDWARE_1 | Symbols:OSHW-Logo_5.7x6mm_SilkScreen | LOGO1 |
| 1 | PMEG3002 | Diodes_SMD:D_SOD-323F | D7 |
| 1 | SAFETY | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J8 |
| 1 | SERIAL1 | Connectors_JST:JST_GH_SM06B-GHS-TB_06x1.25mm_Angled | J17 |
| 1 | SERIAL4 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J20 |
| 1 | SERIAL5 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J21 |
| 1 | SERVO_GND | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J7 |
| 1 | SI3493BDV | Housings_SSOP:TSOP-6_1.65x3.05mm_Pitch0.95mm | Q1 |
| 1 | SIPI | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J15 |
| 1 | SORI | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J23 |
| 1 | SPEKT | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J16 |
| 1 | STM32F100C8T6 | swi_housings_qfp:LQFP-48-L_7x7mm_Pitch0.5mm | U11 |
| 1 | STM32F427VIT6 | swi_housings_qfp:LQFP-100-L_14x14mm_Pitch0.5mm | U3 |
| 1 | TELEM2 | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J18 |
| 1 | TJA1051TK/3 | Housings_DFN_QFN:DFN-8-1EP_3x3mm_Pitch0.65mm | U13 |
| 1 | TPS2062 | Housings_SSOP:MSOP-8-1EP_3x3mm_Pitch0.65mm | U2 |
| 1 | USB_OTG | pkl_connectors:Connector_USB_Micro_B_SMD | P1 |
| 1 | VDD_SERVO | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J6 |
The 191 most common of 196 parts.

Heckus/QUT-OpenFCU
The primary objective is to create an alternative to the difficult-to-source off-the-shelf Pixhawk 6. This work builds upon a edited pixracer version produced by KAI (Wesley) in 2022.

yagamy4680/drone-study
AUAV-OpenSource/FMUv4-PixRacer is the open hardware design of PixHawk FMUv4. It uses STM32F427 and MPU6000. (github)

BenK-CWRU/HandshakePortfolio
A portfolio of electronics design work using KiCad, LTSpice, and similar EDAs.





It measures 51 × 31.5 mm and has 4 copper layers, 1.6 mm thick.
196 parts, built around the STM32F100C8T6B, STM32F427VIT6, 74LVC2G240DP and TJA1051TK/3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the donghee/maru-x21 repository on GitHub, at the commit this page was made from: the board is maru-x21.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask donghee before reusing the design.