Skip to the content

STM32F427VIT6

STMicroelectronicsExtended

-40℃~+85℃ 1.8V~3.6V 12bit 12bit 180MHz 256KB 2MB 32 Bit 82 ARM Cortex-M4 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHS

Part id
st/STM32F427VIT6
Category
Microcontrollers (MCU, MPU, SOC)
Package
LQFP-100(14x14)
Pins
100
In stock
213 at JLCPCB (C57097)
Used on
7 open-source boards

Overview

The STM32F427VIT6 is a microcontroller made by STMicroelectronics in a LQFP-100(14x14) package with 100 pins. -40℃~+85℃ 1.8V~3.6V 12bit 12bit 180MHz 256KB 2MB 32 Bit 82 ARM Cortex-M4 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_ST_STM32F4:STM32F427VITx, from KiCad's library) and its footprint (Package_QFP:LQFP-100_14x14mm_P0.5mm, from KiCad's library), ready for a KiCad board. 213 are in stock at JLCPCB (part C57097). 7 open-source boards in 5 repositories on GitHub use it.

Symbol

1PE22PE33PE44PE55PE66VBAT7PC138PC149PC1510VSS11VDD12PH013PH114NRST15PC016PC117PC218PC319VDD20VSSA21VREF+22VDDA23PA024PA125PA226PA328VDD29PA430PA531PA632PA733PC434PC535PB036PB137PB238PE739PE840PE941PE1042PE1143PE1244PE1345PE1446PE1547PB1048PB1149VCAP_150VDD51PB1252PB1353PB1454PB1555PD856PD957PD1058PD1159PD1260PD1361PD1462PD1563PC664PC765PC866PC967PA868PA969PA1070PA1171PA1272PA1373VCAP_275VDD76PA1477PA1578PC1079PC1180PC1281PD082PD183PD284PD385PD486PD587PD688PD789PB390PB491PB592PB693PB794BOOT095PB896PB997PE098PE1100VDD
MCU_ST_STM32F4:STM32F427VITxFrom KiCad's library

Footprint

Package_QFP:LQFP-100_14x14mm_P0.5mmFrom KiCad's library

From the datasheet

17
Supply, least
1.7 V · VDD, recommended operating, min · p. 94
Supply, most
3.6 V · VDD, recommended operating, max · p. 94
Supply, least
1.7 V · VDDA, ADC limited to 1.2 Msps, min · p. 94
Supply, most
2.4 V · VDDA, ADC limited to 1.2 Msps, max · p. 94
Supply, least
2.4 V · VDDA, ADC limited to 2.4 Msps, min · p. 94
Supply, most
3.6 V · VDDA, ADC limited to 2.4 Msps, max · p. 94
Supply, least
1.65 V · VBAT, recommended operating, min · p. 94
Supply, most
3.6 V · VBAT, recommended operating, max · p. 94
Supply, absolute maximum
4 V · VDD, including VDDA and VBAT, absolute max · p. 91
Works from
-40 °C · ambient, suffix 6, maximum power dissipation, min · p. 94
Works up to
85 °C · ambient, suffix 6, maximum power dissipation, max · p. 94
Junction, hottest
125 °C · junction temperature, absolute max · p. 92
Takes working
98 mA · run mode, 180 MHz, all peripherals enabled, ART enabled except prefetch, typical · p. 100
Takes at most
140 mA · run mode, 180 MHz, all peripherals enabled, ART disabled, TA = 85 °C, max · p. 101
Takes asleep
2.2 µA · standby, VDD = 3.3 V, TA = 25 °C, backup SRAM, RTC and LSE off, typical · p. 103
A pin gives at most
25 mA · per I/O or control pin, sink current, absolute max · p. 92
Junction to air (LQFP100)
43 K/W · junction to ambient · p. 215

Open-source boards using it

7
  • 4 layers59 × 33.8 mmCYM1A113, the printed circuit board in 3D

    CYM1A113

    trezor/trezor-hardware

    :wrench: Hardware design of Trezor

    133 parts228
  • 2 layers100.9 × 62.4 mmWnm mk 1 rev D, the printed circuit board in 3D

    Wnm mk 1 rev D

    Fabien-Chouteau/Wee-Noise-Maker

    Open source pocket synthesizer

    128 parts37GPL-3.0
  • 4 layers153 × 148 mmKeep breathing ctrl, the printed circuit board in 3D

    Keep breathing ctrl

    CV19CO/open_controller_for_ventilator

    Open source controller for ventilators

    260 parts5
  • 4 layers51 × 31.5 mmMaru x21, the printed circuit board in 3D

    Maru x21

    donghee/maru-x21

    Pixhawk compatible autopilot based from AUAV X2.1

    196 parts
  • 4 layers44.5 × 44.5 mmQUT Autopilot Pixracer, the printed circuit board in 3D

    QUT Autopilot Pixracer

    Heckus/QUT-OpenFCU

    The primary objective is to create an alternative to the difficult-to-source off-the-shelf Pixhawk 6. This work builds upon a edited pixracer version produced by KAI (Wesley) in 2022.

    145 parts
  • 4 layers153 × 148 mmKeep breathing ctrl, the printed circuit board in 3D

    Keep breathing ctrl

    CV19CO/open_controller_for_ventilator

    Open source controller for ventilators

    226 parts5
  • 2 layers71.5 × 46 mmQUT AutoPilot SensorTest board, the printed circuit board in 3D

    QUT AutoPilot SensorTest board

    Heckus/QUT-OpenFCU

    The primary objective is to create an alternative to the difficult-to-source off-the-shelf Pixhawk 6. This work builds upon a edited pixracer version produced by KAI (Wesley) in 2022.

    40 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the STM32F427VIT6?

Yes. The symbol is MCU_ST_STM32F4:STM32F427VITx and the footprint Package_QFP:LQFP-100_14x14mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STM32F427VIT6?

LQFP-100(14x14), with 100 pins. Its footprint is drawn on this page.

Where is the STM32F427VIT6 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STM32F427VIT6?

JLCPCB lists it as part C57097, with 213 in stock; the sellers' links on this page open their listings.

What can replace the STM32F427VIT6?

Parts like it in the library: the GD32F470VIT6 by GigaDevice Semicon Beijing, the STM32H743VIT6 by STMicroelectronics, the STM32H750VBT6 by STMicroelectronics and the AT32F403AVGT7 by ARTERY. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the STM32F427VIT6?

7 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.