Skip to the content
123

SI1304BDL

TECH PUBLICExtended

-55℃~+150℃ 1 N-channel 1.2V 14.8pF 146pF 18.3pF 30V 360mW 450mΩ@4.5V 5.2nC@4.5V 800mA SOT-323 MOSFETs ROHS

Part id
tech-public/SI1304BDL
Category
MOSFETs
Package
SOT-323
Pins
3
In stock
15,015 at JLCPCB (C7419947)
Used on
9 open-source boards

Overview

The SI1304BDL is a MOSFET made by TECH PUBLIC in a SOT-323 package with 3 pins. -55℃~+150℃ 1 N-channel 1.2V 14.8pF 146pF 18.3pF 30V 360mW 450mΩ@4.5V 5.2nC@4.5V 800mA SOT-323 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_NMOS_1G_2S_3D, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-323_SC-70, from KiCad's library), ready for a KiCad board. 15,015 are in stock at JLCPCB (part C7419947). 9 open-source boards in 7 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_NMOS_1G_2S_3DFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:SOT-323_SC-70From KiCad's library

From the datasheet

1
Junction, hottest
150 °C · Operating junction temperature, max · p. 1

What it is and has

3
Transistor type
N-Channel Enhancement Mode MOSFET · p. 1
Package
SOT323 (SC70-3) · p. 5
Marking
KFT · p. 1

Specifications

5
ParameterConditionsAs printedPage
Operating Junction Temperature Range TJmin -55 · max 150 °C1
Drain-Source Leakage Current IDSSVDS = 24 V, VGS = 0 V, TJ = 125°Cmax 10 uA2
Forward Transconductance gFSVDS = 4 V, ID = 0.3 Atyp 1 S2
Gate-Source Charge QgsVDS = 15 V, ID = 0.3 A, VGS = 4.5 Vtyp 0.9 · max 1.8 nC2
Diode Forward Voltage VSDVGS = 0 V, IS = 0.2 A, TJ = 25°Cmax 1 V2

Open-source boards using it

9See all 9
  • 2 layers34.1 × 33.6 mmEPaperBreakout, the printed circuit board in 3D

    EPaperBreakout

    FeatureNAB/air-sensor

    Smart Air Quality Sensor built using ESP32, SEN66 and ESPHome

    31 parts171
  • 2 layers61.7 × 46.7 mmEpaperle, the printed circuit board in 3D

    Epaperle

    pavels/epaperle

    29 parts2BSD-2-Clause
  • 2 layers80 × 33.5 mmTomogatchi, the printed circuit board in 3D

    Tomogatchi

    chimmmmy/echain

    software to control a smart keychain with an e ink display, powered by seed studio nrf52840

    25 parts1GPL-3.0
  • 2 layers34.7 × 22.2 mmESP32 Weather, the printed circuit board in 3D

    ESP32 Weather

    ANSHUMANDOCX/ESP32-Weather-Dashboard

    ESP32 weather dashboard using a 3.7 inch eink display

    23 parts
  • 4 layers59.2 × 29.2 mmESP32-Eink, the printed circuit board in 3D

    ESP32-Eink

    Outdatedcandy92/ESP32-Eink

    A tiny E-Ink display driver board featuring an ESP32-C3 and an onboard battery charging IC. It wirelessly drives a 2.13-inch E-Ink display and is designed for portable, ultra-low-power projects such as status displays…

    83 partsCERN-OHL-W-2.0
  • 4 layers79.5 × 53.3 mmEINK DEV, the printed circuit board in 3D

    EINK DEV

    p01t3rge1st/EINK_STM32

    Projekt E-INK AiR 2025. Kod oraz schematy zostają umieszczone tutaj.

    80 parts
  • 2 layers41.5 × 37.5 mmEpd, the printed circuit board in 3D

    Epd

    jsyk/PIP-Watch

    18 parts11

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SI1304BDL?

Yes. The symbol is Pinmap_Generic:Q_NMOS_1G_2S_3D and the footprint Package_TO_SOT_SMD:SOT-323_SC-70, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SI1304BDL?

SOT-323, with 3 pins. Its footprint is drawn on this page.

Where is the SI1304BDL datasheet?

TECH PUBLIC publishes it: the Datasheet link on this page opens it.

Where can I order the SI1304BDL?

JLCPCB lists it as part C7419947, with 15,015 in stock; the sellers' links on this page open their listings.

What can replace the SI1304BDL?

Parts like it in the library: the SI1308EDL by Vishay Intertechnology, the SI1308EDL by TECH PUBLIC, the DMN3065LW by Diodes Incorporated and the NX3008NBKW-TP by TECH PUBLIC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SI1304BDL?

9 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.