Skip to the content

OSHW

209 boards

KiCad boards from 105 GitHub repositories tagged “oshw”, the most starred first; open any of them in PCBKit.

  • 2 layers56.6 × 57.7 mmEsptemp8c, the printed circuit board in 3D

    Esptemp8c

    gcormier/esptemp8c

    n-channel thermocouple logger using esphome

    42 parts8
  • 4 layers41.6 × 32.6 mmLed driver, the printed circuit board in 3D

    Led driver

    Jana-Marie/LAEMP-Spoet

    The LÄMP-Spöt, a snack for moths

    112 parts8CERN-OHL-S-2.0
  • 2 layers165.1 × 110 mmRDL revE4, the printed circuit board in 3D

    RDL revE4

    jericholab/rdl

    Resistance Data Logger

    120 parts8GPL-2.0
  • 2 layers66.7 × 86.4 mmBbb parallel cape, the printed circuit board in 3D

    Bbb parallel cape

    machinekoder/bb-parallel-port-cape

    A parallel port cape for the BeagleBone

    46 parts8
  • 2 layers29.8 × 33.7 mmJoystick, the printed circuit board in 3D

    Joystick

    mignon-p/A2JoystickAdapter

    A simple board to connect a 16-pin Apple II joystick to the 9-pin connector on the back of Apple IIe and later computers.

    3 parts8CC-BY-SA-4.0
  • 4 layers85 × 50 mmPdlc, the printed circuit board in 3D

    Pdlc

    brown-studios/pdlc

    A circuit board for driving PDLC film from 12 V DC

    127 parts7MIT
  • 2 layers36 × 33.5 mmPrinter otter, the printed circuit board in 3D

    Printer otter

    Jana-Marie/otter-printer

    It prints Otter!

    49 parts7
  • 2 layers30.7 × 17.6 mmOtterPill CAN, the printed circuit board in 3D

    OtterPill CAN

    Jana-Marie/OtterPill-CAN-Adapter

    CAN-adapter for the OtterPill running candleLight firmware.

    10 parts7
  • 4 layers156.5 × 85.4 mmP2 Kevinbot Board, the printed circuit board in 3D

    P2 Kevinbot Board

    meowmeowahr/KevinbotV3-KiCAD

    Kevinbot Core - Parallax Propeller 2 Robot Controller

    166 parts7CERN-OHL-S-2.0
  • 2 layers100 × 90 mmCurrent dr amp, the printed circuit board in 3D

    Current dr amp

    werediver/current-dr-amp

    A current drive headphone amplifier

    83 parts7
  • 4 layers56.6 × 57.7 mmEspairqual, the printed circuit board in 3D

    Espairqual

    gcormier/espairqual

    esphome board to interface with a few air quality (PM) sensors

    47 parts6
  • 2 layers45 × 30 mmEsphome humitemp, the printed circuit board in 3D

    Esphome humitemp

    gcormier/esphome-humitemp

    esphome temperature and humidity sensor

    17 parts6
  • 2 layers38.5 × 27 mmJlinkBreakout, the printed circuit board in 3D

    JlinkBreakout

    Jana-Marie/JlinkBreakout

    Segger Jlink to Tag-Connect and SWD adapter

    11 parts6
  • 2 layers52 × 80 mmRP2040 Fan Controller, the printed circuit board in 3D

    RP2040 Fan Controller

    mietzen/RP-Pico-Fan-Controller

    Raspberry Pi Pico fan controller

    30 parts6MIT
  • 2 layers77.5 × 45.7 mmNeoBit, the printed circuit board in 3D

    NeoBit

    mignon-p/NeoBit

    KiCad files for a board that lets you hook up NeoPixels to a BBC micro:bit. The board also has a couple of slide potentiometers for input.

    27 parts6CC-BY-SA-4.0
  • 2 layers158 × 63 mmOven controller, the printed circuit board in 3D

    Oven controller

    codeThatThinks/oven-controller-hw

    A Raspberry Pi Zero-powered PID reflow oven controller -- PCB design files

    66 parts5
  • 2 layers37.6 × 16.1 mmUSB UART BRIDGE, the printed circuit board in 3D

    USB UART BRIDGE

    Jana-Marie/USB-UART-BRIDGE

    USB-UART-BRIDGE & ESP programmer featuring tag-connect

    22 parts5
  • 2 layers112 × 202 mmRIAA, the printed circuit board in 3D

    RIAA

    leicht-io/BeoGram-4002-RIAA

    Open-source RIAA phono preamp for the Bang & Olufsen BeoGram 4002/4004 turntable (KiCad)

    63 parts5CERN-OHL-S-2.0
  • 6 layers76.5 × 339.8 mmFmc host, the printed circuit board in 3D

    Fmc host

    open-ephys/onix-fmc-host

    FMC board to acquire from ONIX headstages and breakout boards

    320 parts5
  • 2 layers51.8 × 73.5 mmReachBetween rounded, the printed circuit board in 3D

    ReachBetween rounded

    qubist/ReachBetween

    Simple, cheap, hackable, DIY, open-source USB-C input switcher

    11 parts5GPL-3.0
  • 2 layers145 × 65 mmFan test adapter, the printed circuit board in 3D

    Fan test adapter

    tjko/fan-test-adapter

    Adapter PCB board for easily testing PC (PWM) fans.

    75 parts5GPL-3.0
  • 4 layers60 × 73.5 mmAnthracite bottom, the printed circuit board in 3D

    Anthracite bottom

    trope-oshw/anthracite

    MIDI-controllable fuzz pedal: open hardware (CERN-OHL-S-2.0), firmware (GPL-3.0-or-later)

    224 parts5CERN-OHL-S-2.0
  • 2 layers38.1 × 49.5 mmEsp32c3-iot client board, the printed circuit board in 3D

    Esp32c3-iot client board

    74th/esp32c3-iot-server-board

    Board for converting Grove device to IoT Server using ESP32-C3-WROOM-02.

    40 parts4MIT
  • 2 layers11 × 21.9 mm18650-interlude, the printed circuit board in 3D

    18650-interlude

    Jana-Marie/18650-interlude

    A very simple board to measure the current from a 18650 battery cell for power profiling.

    4 parts4