
Base promicro
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Raspberry Pi Pico fan controller
RP2040 Fan Controller is an open-source printed circuit board by mietzen, from the mietzen/RP-Pico-Fan-Controller repository on GitHub, published under the MIT licence. It is a 2-layer board of 52 × 80 mm with 30 parts on 44 nets, routed with 126 tracks and 0 vias.
Its parts include 9 resistors and 1 connector. It belongs with the RP2040 boards of this library.
This project aims to create a fan controller based on an RP2040 / RP2350 that can be hand-soldered by anyone and will run on any machine! It uses only the bare minimum of through-hole solder parts to give you:
The idea came up when I was building my home server with consumer parts and realized again that most onboard fan controllers don't work properly on Linux.
The project consists of three parts:
The firmware is waiting for commands over the serial usb interface, documented the json commands and responses json-schema.
Here are some pictures from my prototype PCB that I’m using for development:
The project is still in development, I still have a couple of TODOs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 2.7K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 6 | Fan_4pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | Fan1, Fan2, Fan3, Fan4, Fan5, Fan6 |
| 3 | , , | ||
| 3 | 10k | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | TH1, TH2, TH3 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R7, R8, R9 |
| 1 | LOGO | Library:LOGO | G*** |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_THT | A1 |
| 1 | Toast_Invert | Library:Toast_Invert | G*** |
| 1 | USB | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J1 |
The 25 most common of 30 parts.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 52 × 80 mm and has 2 copper layers, 1.6 mm thick.
30 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mietzen/RP-Pico-Fan-Controller repository on GitHub, at the commit this page was made from: the board is kicad/RP2040_Fan_Controller.kicad_pcb and its schematic kicad/RP2040_Fan_Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).