Hardware

1,802 boards

KiCad boards from 760 GitHub repositories tagged “hardware”, the most starred first; open any of them in PCBKit.

2 layers96.1 × 44.8 mm
Module tester
mertwole/tetris
NES tetris running on FPGA without processor
18 parts
4 layers57.2 × 49.2 mm
USBVolumeKnob
Microsparky/usb-vk-hardware
Hardware for USB Volume Knob
78 parts
2 layers51 × 23.2 mm
Feather sdio
mikeysklar/feather-sdio
A simple SDIO breakout FeatherWing adapter board (KiCad)
7 partsGPL-3.0
2 layers33 × 37 mm
Single Sided-5V Power Supply
Mimo-Mir/Single-Sided-5V-Power-Supply
PCB design project using KiCad 9: single-sided 5V regulated power supply with LM7805, full design workflow from schematic to Gerber files.
8 partsMIT
4 layers46.5 × 17.4 mm
Stick
mkalmousli/tandem-stick
[WIP] Open hardware concept: button-free wireless USB sticks. 3D explorer, plan, test lab, fab files.
12 partsMIT
2 layers36.9 × 16.9 mm
Tiny solar supply
Mo-Kara/kicad-learning-projects
KiCad practice boards recreated from public tutorials while learning PCB design
17 parts
4 layers17.8 × 21 mm
Mini Drone
MohanrajDS/micro-drone-fc-kicad
Compact 4-layer micro drone flight controller PCB (XIAO ESP32-S3 + MPU-6050, 4x brushed motor drivers) designed in KiCad 9
38 parts
2 layers50 × 25.2 mm
PD controler
Moumne-mo/stusb4500-pd-trigger
Standalone USB-C Power Delivery trigger board (5V-20V / 3A+) using STUSB4500 & KiCad
29 parts
2 layers
CRET
ms02-1337/CRET
Can-bus Reverse Engineering Toolkit
85 partsGPL-3.0
2 layers61 × 31.5 mm
PWB.003
MuffinKing-jpeg/PWB.003
PCB for powering something from 1S LI-PO/LI-ION or USB
71 parts
2 layers50 × 32 mm
Unipa bioamp pro
Mustafa-Yagci/unipa-bioamp-pro
Precision Biopotential Analog Front-End (AFE) for ECG/EMG/EEG | CMRR >100 dB | Driven Right Leg (DRL) Active Feedback | KiCad 8 & Production Gerbers
27 partsMIT
2 layers39 × 34 mm
LM2576HV BREAKOUT MOD
NatanaelBimo/LM2576HV-BREAKOUT-MOD
LM2576HV switching regulator (12V) breakout board - Handle up to 60V input with high efficiency buck conversion. Open source hardware design.
13 parts
2 layers34 × 25.5 mm
Nicklink
NickStassen/nicklink
NickLink v1.3 — compact STM32F103C8 breakout board (KiCad)
46 partsMIT
4 layers83 × 120 mm
Jd2oscope
Niftion/jd2oscope
2CH 1MS/s, 12-Bit, 50kHz Oscope (5V) w/320x240 TFT & ESP32
61 parts
2 layers25.4 × 26.3 mm
05 linear regulator
nitu2126/kicad-learning-path
My KiCad learning path: fully documented PCB projects from a simple LED board to advanced designs, with schematics, layouts, Gerbers, calculations and verification reports.
14 partsMIT
2 layers8.2 × 60 mm
LED
NodokaQwQ/Torch-driver
A high power LED torch driver board with a diameter of 1.6mm, using LM3410 for boost module and STC15F104W for control module.
14 parts
4 layers53.3 × 66 mm
Nrf52840-ufo
NozomiNetworks/NN-nRF52840-CW308-target-board
nRF52840 target for the CW308 UFO board
40 partsCERN-OHL-S-2.0
2 layers90 × 90 mm
Ieee
nruth633/ieee-pcb
One slice of the DU IEEE chapter's LED cube: 74HCT595 shift registers driving 24 LED channels (KiCad)
89 parts
2 layers92.1 × 99.4 mm
Power Gauge PCB
oct-karim/Mini-Power-Gauge
A mini power gauge that mesures current and voltage.
54 parts
2 layers131 × 46.5 mm
Original pd pi001
owen-rp2a03/pcengine
PC Engine system and perhipheral schematics and pcbs with a kicad library
47 partsMIT
2 layers30 × 64 mm
Customized ESP-32
pazambranosauc/esp32-devboard
Two-layer ESP32-WROOM-32 dev board in KiCad: USB-C, CP2102N with auto-reset, AMS1117, breadboard headers. Rev B after a design review of rev A.
28 parts
2 layers70 × 70 mm
Cacophonator
phastmike/cacophonator
Cacophonator KiCad project
53 parts
2 layers95 × 75 mm
RepeaterController
phastmike/neutec-repeater-hardware
Contains KiCad files for the Neutec Repeater Project. Firmware is on a different repository
58 parts
2 layers45.1 × 20.8 mm
2FAK Programmable
planmarks/2FAK
2FAK Programmable USB and 2-Factor Authentication Key
26 partsApache-2.0