Skip to the content
2 layers8.2 × 60 mmLED, the printed circuit board in 3D

A high power LED torch driver board with a diameter of 1.6mm, using LM3410 for boost module and STC15F104W for control module.

Size
8.2 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
11
Pads
43
Tracks, vias
25, 20
Pours
21
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
23 Jul 2024
Updated
31 Jul 2024

Overview

LED is an open-source printed circuit board by NodokaQwQ, from the NodokaQwQ/Torch-driver repository on GitHub. It is a 2-layer board of 8.2 × 60 mm with 14 parts on 11 nets, routed with 25 tracks and 20 vias.

Its parts include 3 inductors, 2 capacitors, 1 resistor, 1 IC and 1 diode.

README

README.md

The LED torch with NV4WB35AM. Use LM3401 as the current-fixed DC-DC controller. Use STC15L104W as the pwm controller and for battery protection.

Parts

14
QtyValueFootprintReferences
222uHInductor_SMD:L_Taiyo-Yuden_MD-4040L3, L4
110uFCapacitor_SMD:C_0603_1608MetricC1
1137mUserLyb:SMD-0508R1
127uHInductor_SMD:L_1812_4532Metric_Pad1.30x3.40mm_HandSolderL1
147uFCapacitor_SMD:C_1206_3216MetricC2
1DDiode_SMD:D_SOD-323_HandSolderingD1
1~Package_DFN_QFN:DFN-8-1EP_4x4mm_P0.8mm_EP2.39x2.21mmU2
1~Package_SON:WSON-6-1EP_3x3mm_P0.95mmLM3401
1~UserLyb:NV4WB35AMNV4WB35AM1

The 10 most common of 14 parts.

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the LED PCB?

It measures 8.2 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LED use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LED KiCad files?

From the NodokaQwQ/Torch-driver repository on GitHub, at the commit this page was made from: the board is LED.kicad_pcb and its schematic LED.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LED design in my own project?

Its repository states no licence, so its author keeps all rights: ask NodokaQwQ before reusing the design.