4 layers57 × 56 mm
Iot led strip pcb
0xjmux/iot_leddriver_hw
ESP32-based WS2812B LED Strip Driver PCB, designed for music visualization
85 parts9
LED controller
26 boardsKiCad boards from 20 GitHub repositories tagged “led-controller”, the most starred first; open any of them in PCBKit.
- 2 layers100 × 100 mm
LED controller
Llamero/30mm_cage_plate_LED_MCPCB
LED mount that is compatible with the Thorlabs 30 mm cage plate
45 parts9 - 2 layers100 × 100 mm
WLEDController
LostInCompilation/WLED-Controller-PCB
WLED Controller Board with ESP32 - 4 Channels - Current and Power Monitoring - INMP441 Microphone
69 parts8 - 2 layers100 × 79.7 mm
- 2 layers49.3 × 49 mm
Zigbee led
agendek78/zigbee_led_driver
Zigbee 3.0 4-channel LED strip driver (MGM210L)
77 parts6GPL-3.0 - 2 layers100 × 100 mm
Four Channel MHz LED Driver
Llamero/Four_Channel_MHz_LED_Driver
High Speed Four Channel LED Driver that can run up to 30A
96 parts6 - 2 layers134.4 × 106.7 mm
Led controller
MbFredys/PCB-LEDs-Controller
LED-controller PCB design exercise focused on PWM control, power distribution, and hardware documentation.
42 parts6 - 2 layers45.6 × 49.5 mm
- 2 layers100 × 67 mm
Led controller
markus-k/led-controller-hardware
KiCAD schematics and design files for my LED controller.
91 parts5 - 2 layers40 × 21.1 mm
Microscope LED
CGrassin/microscope_led_light_circuit
A dimming LED circuit designed for optical microscopes.
20 parts2CC-BY-4.0 - 2 layers77.5 × 67.1 mm
Fibre tree LED controller
koczadly/xmas-led-controller
Personal project to revitalise an ancient fibre optic Christmas tree using a custom-built digital LED module
53 parts2MIT - 2 layers81.3 × 76.2 mm
Rgb matrix pcb
1-max-1/rgb-matrix
PCB and software for driving an 8x8 matrix of common anode RGB LED's.
36 parts1 - 2 layers100 × 100 mm
High current LED switch with ballast
Llamero/Optokintetic_Relflex_Rig
The development of this scope and illuminator was funded by the following grant: NIH P30EY003176
40 parts1MIT - 2 layers94 × 85 mm
- 2 layers80 × 60 mm
- 2 layers53 × 50 mm
Sunmachine A2
gblach/Sunmachine-A2-pcb
The driver for WS2812, SK6812 or similar LED strips controlled via Bluetooth LE. It supports both RGB and WWA LEDs.
18 parts - 2 layers57.6 × 53.9 mm
LEDController
Hydr0neFN/LightController
ESP32-C3 LED controller with USB-C PD input, HomeKit native, KiCad PCB design
37 partsMIT - 2 layers7.4 × 6.7 mm
- 2 layers8.2 × 60 mm
LED
NodokaQwQ/Torch-driver
A high power LED torch driver board with a diameter of 1.6mm, using LM3410 for boost module and STC15F104W for control module.
14 parts - 2 layers48 × 84 mm
- 2 layers40 × 40 mm
30 mm Cage Plate LED MCPCB
Llamero/30mm_cage_plate_LED_MCPCB
LED mount that is compatible with the Thorlabs 30 mm cage plate
27 parts9 - 2 layers20 × 42.9 mm
- 2 layers122 × 70 mm
- 2 layers100 × 98 mm
