

LED driver switch
- Size
- 100 × 98 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 43
- Pads
- 137
- Tracks, vias
- 166, 201
- Pours
- 26
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 23 Aug 2024
- Updated
- 29 Jul 2025
Overview
LED driver switch is an open-source printed circuit board by Llamero, from the Llamero/Cryo_Plunger_LED_Array repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 100 × 98 mm with 40 parts on 43 nets, routed with 166 tracks and 201 vias.
It is built around the TN2124K1-G. Its parts include 10 resistors, 6 capacitors, 4 connectors, 3 diodes and 3 fuses.
Main components
1Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C5, C6 |
| 3 | 10 | Package_TO_SOT_THT:TO-247-2_Vertical | R6, R7, R8 |
| 3 | Fuse | Custom footprints:FUSE_OMF250_SCH | F1, F2, F3 |
| 2 | 20k | Resistor_SMD:R_0603_1608Metric | R3, R9 |
| 2 | SYM_Flash_Small | Symbol:Symbol_Highvoltage_Type2_CopperTop_Small | SYM2, SYM2 |
| 2 | Standoff | Custom footprints:8-32 Isolated Hole | H1, H3 |
| 1 | 1 | Package_TO_SOT_THT:TO-126-2_Vertical | R5 |
| 1 | 100k | Custom footprints:R_1206_3216 - HV slot | R4 |
| 1 | 100k | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 15V Zener | Diode_SMD:D_SOD-123 | D2 |
| 1 | 180 | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 1M | Custom footprints:R_1206_3216 - HV slot | R1 |
| 1 | 2.2µF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 3mF | Custom footprints:ALF20G302KP400 | C4 |
| 1 | 3x Banana Jack | Custom footprints:SolderWire-0.5sqmm_1x03_P4.6mm_D0.9mm_OD2.1mm - HV Slot | J2 |
| 1 | 4.096V | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | 8P8C_Shielded | Custom footprints:BEL_SS71800-019F - HV Slot | J4 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Left | J5 |
| 1 | Conn_Coaxial | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | J3 |
| 1 | D | Custom footprints:P26_DO-214AA_SMB | D1 |
| 1 | E12 Socket | Custom footprints:SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm - HV Slot | LA1 |
| 1 | Itsy_Bitsy_32u4 | Custom footprints:Itsy Bitsy 32u4 | U1 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | SYM3 |
| 1 | PMOS | Custom footprints:TO-252-2 - HV | Q1 |
| 1 | SW_Push_LED | Connector_Wire:SolderWire-0.5sqmm_1x04_P4.6mm_D0.9mm_OD2.1mm | SW1 |
| 1 | SYM_Flash_Small | Custom footprints:Symbol_HighVoltage | SYM1 |
| 1 | Speaker_Crystal | Custom footprints:XDCR_SMT-0940-T-3V-R | LS1 |
| 1 | Standoff | Custom footprints:8-32 Standoff | H2 |
| 1 | TN2124 | Custom footprints:SOT-23-3 - HV Slot | Q2 |
| 1 | TVS | Custom footprints:SMDJSeries_LTF | D3 |
More from Llamero/Cryo_Plunger_LED_Array
4- 2 layers7.4 × 6.7 mm

- 2 layers122 × 70 mm

- 2 layers42.1 × 34.6 mm

- 2 layers13 × 24.5 mm

Similar boards
- 2 layers139.7 × 73.7 mm

- 2 layers149.4 × 177.4 mm

Lightsculpture
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
40 parts915 - 2 layers150 × 50 mm

EleLab v2 Bus150
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
40 parts531GPL-3.0 - 2 layers66.4 × 48.1 mm

Raspberry
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
40 parts456 - 2 layers44 × 44 mm

- 2 layers90.8 × 53.3 mm

- 2 layers59.6 × 109.5 mm

Drop
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
40 parts410 - 2 layers123.8 × 73.5 mm

Questions
How big is the LED driver switch PCB?
It measures 100 × 98 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LED driver switch use?
40 parts, built around the TN2124K1-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LED driver switch KiCad files?
From the Llamero/Cryo_Plunger_LED_Array repository on GitHub, at the commit this page was made from: the board is KiCAD/LED driver switch/LED driver switch.kicad_pcb and its schematic KiCAD/LED driver switch/LED driver switch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LED driver switch design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).