2 layers42.9 × 15.2 mm
Hardware
1,802 boardsKiCad boards from 760 GitHub repositories tagged “hardware”, the most starred first; open any of them in PCBKit.
- 4 layers22.9 × 50.8 mm
Project MS88SF3-breakout
fgervais/project-MS88SF3-breakout
An MS88SF3 breakout board in the Feather form factor.
28 parts1 - 2 layers100 × 100 mm
- 2 layers5.5 × 35 mm
LM75A PROBE PCB
galopago/i2c-temp-probe-pcb
Small circuit board, designed to be installed inside a metal tube or thermowell.
13 parts1MIT - 2 layers75 × 49 mm
Rak811-lora adaptable node
galopago/rak811-lora-adaptable-node
RAK811 based LoRa node, with multiple expansion possibilities and designed to fit inside a generic 83x58x33mm waterproof enclosure box.
23 parts1CC-BY-4.0 - 2 layers75 × 49 mm
Rak4200-lora adaptable node
galopago/rak4200-lora-adaptable-node
RAK4200 based LoRa node, with multiple expansion possibilities and designed to fit inside a generic 83x58x33mm waterproof enclosure box.
19 parts1CC-BY-4.0 - 4 layers92 × 88 mm
IOT
Habib-creater/ESP32-IoT-Monitoring-Control-Board
4-layer ESP32-based IoT monitoring and control board with environmental sensing, relay control, USB-C, and Qwiic expansion.
63 parts1 - 2 layers16.5 × 20.3 mm
BMI270-Breakout
HackableElectronics/BMI270-Breakout
BMI270 IMU breakout board using STEMMA QT / Qwiic
16 parts1LGPL-2.1 - 2 layers16.5 × 20.3 mm
Lsm6dr3trc breakout
HackableElectronics/LSM6DS3TR-C-Breakout
LSM6DS3TR-C IMU breakout board using Qwiic
16 parts1GPL-3.0 - 2 layers77.1 × 29.7 mm
Buck converter
hasanberkdasar/Buck-converter
XL4015 buck converter prototype: 8–30 V DC input to regulated 5 V USB-A output
11 parts1MIT - 2 layers17.8 × 43.2 mm
- 4 layers45 × 50 mm
- 4 layers51.4 × 61 mm
- 2 layers200.5 × 67.7 mm
P2000t ram expansion board-2080kb
ifilot/p2000t-ram-expansion-board
RAM expansion board for the P2000T
32 parts1 - 2 layers57 × 43.5 mm
- 2 layers143.8 × 193 mm
PCB LeftPanel
jacobston/PCB_AVR_IO
Arduino expansion board with 160 input and output connectors. Compatible with Uno or Leonardo. 5V output.
172 parts1 - 4 layers65 × 48 mm
MACHXO2 test
jay-waghmare/MachXO2-KiCad-Board
Custom MachXO2 FPGA Development Board - KiCad Design - Power, Clock, JTAG, LEDs - By Jay Waghmare
52 parts1MIT - 2 layers
Pointer
jphastings/jan-poka
Jan Poka is a suite of tools for controlling custom internet-of-things devices that help make your distant friends feel closer.
9 parts1 - 2 layers99.1 × 50.8 mm
StompFork
jurihock/StompFork
Active audio signal splitter to drive multiple parallel stompboxes
34 parts1GPL-3.0 - 2 layers80.5 × 113 mm
- 2 layers65 × 45 mm
Esp32s3 imu
kanishqtanwar35-hub/esp32s3-usb-imu-board
2-layer ESP32-S3 board with onboard CH340C USB-UART (auto-reset) and ICM-42688-P IMU. KiCad schematic, layout, gerbers and bring-up firmware.
36 parts1 - 4 layers100 × 50 mm
VME axpvme230 p2 dual
kanpapa/VMEbus-AXPvme
This repository contains documentation and sources for running DEC AXPvme 230
16 parts1 - 2 layers31 × 21.6 mm
- 2 layers100.6 × 78.2 mm
Security System Arduino Shield
KhaledGhanem0/PCB-Shield-Security-System
KiCad PCB shield design for an Arduino Mega-based multi-zone security system. Two-layer, through-hole, hand-solderable board replacing the breadboard prototype.
33 parts1MIT