2 layers19.8 × 6.3 mm
2 layers31 × 21.6 mm
Nosepoke
Karpova-Lab/nosepoke1Nosepoke for rat behavior
- Size
- 31 × 21.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 10
- Pads
- 27
- Tracks, vias
- 38, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20220914)
- Created
- 4 Jan 2019
- Updated
- 28 Aug 2023
Overview
Nosepoke is an open-source printed circuit board by Karpova-Lab, from the Karpova-Lab/nosepoke repository on GitHub. It is a 2-layer board of 31 × 21.6 mm with 10 parts on 10 nets, routed with 38 tracks and 2 vias.
It is built around the 23-11/T7D-CQ2R2QY/2A, IR26-21C/L110/TR8 and PT26-21C/TR8. Its parts include 4 resistors, 2 diodes, 1 transistor and 1 connector.
Main components
3
23-11/T7D-CQ2R2QY/2A
1206-40℃~+85℃ 140° 2.95V 5mA 90mcd~180mcd White Yellow Lens 1206 LED Indication - Discrete ROHSEverlight ElectronicsLED Indication - Discrete
IR26-21C/L110/TR8
1206-25℃~+85℃ 1.2V 1mW/sr@IF=20mA 940nm 1206 Infrared LED Emitters ROHSEverlight ElectronicsInfrared LED EmittersPT26-21C/TR8
1206-25℃~+85℃ 20mA 30V 50nA 75mW 940nm 1206 LED Indication - Discrete ROHSEverlight ElectronicsLED Indication - Discrete
README
readme.mdNosepoke
Full Documentation here: https://karpova-lab.github.io/nosepoke/
Ask questions here: https://github.com/Karpova-Lab/nosepoke/discussions
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad_TopOnly | H1, H2 |
| 1 | 0855135013 | asl_footprints:RJ45_SMD_Vertical | J1 |
| 1 | 10KΩ | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 200Ω | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 20KΩ | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 23-11/T7D-CQ2R2QY/2A | asl_footprints:board_to_board_joint | D2 |
| 1 | 82Ω | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | IR26-21C/L110/TR8 | asl_footprints:board_to_board_joint | D1 |
| 1 | PT26-21C/TR8 | asl_footprints:board_to_board_joint | Q1 |
More from Karpova-Lab/nosepoke
1Similar boards
- 4 layers85.6 × 54 mm
SYCL Badge 2024
ZigEmbeddedGroup/sycl-badge
The badge for the SYCL conference! https://zigembeddedgroup.github.io/sycl-badge/
92 parts39 - 2 layers68 × 100 mm
Solderparty keyboard featherwing hw keyboard featherwing
oomlout/oomlout_oomp_project_bot_v_2
96 parts - 2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k
Questions
How big is the Nosepoke PCB?
It measures 31 × 21.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nosepoke use?
10 parts, built around the 23-11/T7D-CQ2R2QY/2A, IR26-21C/L110/TR8 and PT26-21C/TR8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nosepoke KiCad files?
From the Karpova-Lab/nosepoke repository on GitHub, at the commit this page was made from: the board is pcb/nosepoke.kicad_pcb and its schematic pcb/nosepoke.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nosepoke design in my own project?
Its repository states no licence, so its author keeps all rights: ask Karpova-Lab before reusing the design.