
PCT2075 PROBE PCB
galopago/i2c-temp-probe-pcb
Small circuit board, designed to be installed inside a metal tube or thermowell.

Small circuit board, designed to be installed inside a metal tube or thermowell.
LM75A PROBE PCB is an open-source printed circuit board by galopago, from the galopago/i2c-temp-probe-pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 5.5 × 35 mm with 13 parts on 9 nets, routed with 84 tracks and 8 vias.
Its parts include 5 connectors, 3 resistors, 1 capacitor and 1 IC. It belongs with the sensors and measurement boards of this library.
Small circuit board (4.0x35mm), based on PCT2074 chip, designed to be installed inside a metal tube or thermowell.

The PCB was developed in KiCad V5.1,


| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Conn_01x01_Female | STRANDEDWIRE:StrandedWire_Pad_0.6x5.0mm | J1, J2, J3, J4, J5 |
| 3 | R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3 |
| 3 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP0, JP1, JP2 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | LM75B | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |

galopago/i2c-temp-probe-pcb
Small circuit board, designed to be installed inside a metal tube or thermowell.



samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments


willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 5.5 × 35 mm and has 2 copper layers, 1.6 mm thick.
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the galopago/i2c-temp-probe-pcb repository on GitHub, at the commit this page was made from: the board is lm75A-probe-pcb/LM75A_PROBE_PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).