Skip to the content
4 layers22.9 × 50.8 mmProject MS88SF3-breakout, the printed circuit board in 3D

Project MS88SF3-breakout

fgervais/project-MS88SF3-breakout1

An MS88SF3 breakout board in the Feather form factor.

Size
22.9 × 50.8 mm
Copper layers
4
Thickness
1.6 mm
Parts
28
Nets
68
Pads
164
Tracks, vias
277, 52
Pours
5
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
1 Jul 2022
Updated
6 Oct 2024

Overview

Project MS88SF3-breakout is an open-source printed circuit board by fgervais, from the fgervais/project-MS88SF3-breakout repository on GitHub. It is a 4-layer board of 22.9 × 50.8 mm with 28 parts on 68 nets, routed with 277 tracks and 52 vias.

It is built around the PTS810SJM250SMTRLFS, S2B-PH-SM4-TB(LF)(SN) and USB4105-GF-A. Its parts include 7 resistors, 5 capacitors, 5 connectors, 1 IC and 1 diode. It belongs with the interfaces and adapters and microcontroller boards boards and the nRF52 and nRF5x boards of this library.

Main components

3

README

README.md

MS88SF3 Breakout Board

Overview PCB

Objective

Try out the nRF52840 module from Minew.

Power Consumption

Sleep - Full RAM retention - GPIO wake-up

Average: 2.78 μA

Sleep Power

Price

PCB

BOM

Firmware

Parts

28
QtyValueFootprintReferences
4MountingHole_PadMountingHole:MountingHole_2.2mm_M2_ISO7380_PadH1, H2, H3, H4
34.7uFCapacitor_SMD:C_0805_2012MetricC2, C4, C6
35.1kResistor_SMD:R_0603_1608MetricR1, R4, R5
2100nFCapacitor_SMD:C_0603_1608MetricC1, C5
222Resistor_SMD:R_0603_1608MetricR6, R7
110uHInductor_SMD:L_0603_1608MetricL1
11kResistor_SMD:R_0603_1608MetricR2
14.7Resistor_SMD:R_0603_1608MetricR3
1Conn_01x12_Pinmine:PinHeader_1x12_P2.54mm_VerticalJ4
1Conn_01x16_Pinmine:PinHeader_1x16_P2.54mm_VerticalJ5
1Conn_02x05_Odd_EvenConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMDJ1
1LEDLED_SMD:LED_0603_1608MetricD1
1MS88SF3_NRF52840MS88SF3_NRF52840:MODULE_MS88SF3_NRF52840U1
1PTS810_SJM_250_SMTR_LFSPTS810-SJM-250-SMTR-LFS:SW_PTS810_SJM_250_SMTR_LFSSW1
1S2B-PH-SM4-TB(LF)(SN)S2B-PH-SM4-TB(LF)(SN):JST_S2B-PH-SM4-TB(LF)(SN)J2
1SolderJumper_2_Bridgedmine:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1
1SolderJumper_2_Openmine:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP2
1USB4105-GF-AUSB4105-GF-A:GCT_USB4105-GF-AJ3
1Val**drawing:bear-body_silk_16x16Ref**

Similar boards

  • 4 layers110 × 80 mmEsp32p4 extreme, the printed circuit board in 3D

    Esp32p4 extreme

    Andreuxxx1977/esp32-p4

    An open-hardware, actively cooled ESP32-P4 board for heavy multimedia work: a 2-lane MIPI camera, a 2-lane MIPI display, USB 2.0 High-Speed, 10/100 Ethernet, UHS-I microSD, 32 MB flash and 32 MB PSRAM.

    234 parts1CERN-OHL-P-2.0
  • 4 layers60.4 × 46.1 mmGoldenForm 1, the printed circuit board in 3D

    GoldenForm 1

    Athyo30/PCB

    Contains some PCBs by Atharva.

    70 partsMIT
  • 4 layers61.3 × 61.3 mmCyton Mod, the printed circuit board in 3D

    Cyton Mod

    flosimn/Cyton-Mod

    135 parts1
  • 4 layers90 × 60 mmVW MTC1, the printed circuit board in 3D

    VW MTC1

    Sajeevanveeriah/Ataxia-Monitor

    Real-Time Ataxia Monitor

    154 partsUnlicense
  • 4 layers46 × 86.4 mmOpenCycle, the printed circuit board in 3D

    OpenCycle

    Vishvak365/OpenCycle

    Everything is generated from design.py — do not hand-edit the board and then regenerate, you will lose the edit. If you do route by hand in KiCad, stop using the pipeline for that board and say so in docs/DECISIONS.md.

    79 parts
  • 2 layers86 × 54 mmLLM Business Card, the printed circuit board in 3D

    LLM Business Card

    pham-tuan-binh/bouija

    Running LLM on a Business Card LITERALLY

    84 parts60
  • 4 layers55 × 60 mmPico dual PMSM BUG79100G DRV8316C, the printed circuit board in 3D

    Pico dual PMSM BUG79100G DRV8316C

    Gepetto/MOTKIN-PCB

    Low cost PMSM using RPI Pico, external ADC and integrated mos+driver+current sensing.

    85 parts6BSD-3-Clause
  • 2 layersRC KiCAD, the printed circuit board in 3D

    RC KiCAD

    dev-campusfab/FabRice

    Documentation et code source de FabRice, le robot Autonome.

    62 parts4MIT

Questions

How big is the Project MS88SF3-breakout PCB?

It measures 22.9 × 50.8 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Project MS88SF3-breakout use?

28 parts, built around the PTS810SJM250SMTRLFS, S2B-PH-SM4-TB(LF)(SN) and USB4105-GF-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Project MS88SF3-breakout KiCad files?

From the fgervais/project-MS88SF3-breakout repository on GitHub, at the commit this page was made from: the board is hardware/project-MS88SF3-breakout.kicad_pcb and its schematic hardware/project-MS88SF3-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Project MS88SF3-breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask fgervais before reusing the design.