2 layers100 × 100 mm
4 layers60.4 × 46.1 mm
GoldenForm 1
Athyo30/PCBContains some PCBs by Atharva.
- Size
- 60.4 × 46.1 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 70
- Nets
- 85
- Pads
- 275
- Tracks, vias
- 440, 108
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Mar 2026
- Updated
- 3 Mar 2026
Overview
GoldenForm 1 is an open-source printed circuit board by Athyo30, from the Athyo30/PCB repository on GitHub, published under the MIT licence. It is a 4-layer board of 60.4 × 46.1 mm with 70 parts on 85 nets, routed with 440 tracks and 108 vias.
It is built around the ESP32-S3-WROOM-1-N8, AO3400A and BNO055, with the USBLC6-2P6, PTS810SJM250SMTRLFS and SLW-1276864-4A-D among its other parts. Its parts include 26 resistors, 13 capacitors, 9 diodes, 6 connectors and 5 ICs. It belongs with the ESP32 boards of this library.
Main components
7
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
BNO055
LGA-28(3.8x5.2)-40℃~+85℃ 2.4V~3.6V 40uA I2C、UART IMU X,Y,Z X,Y,Z ±16g ±2000dps LGA-28(3.8x5.2) Accelerometers ROHSBosch SensortecAccelerometers
USBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
PTS810SJM250SMTRLFS
SMD-4P,4.2x3.2mm-40℃~+85℃ 1.6N 16V 2.5mm 3.2mm 4.2mm 50mA J-Lead Round Button SPST Surface Mount,Vertical SMD-4P,4.2x3.2mm Tactile Switches ROHSC&KTactile SwitchesSLW-1276864-4A-D
插件-3P,12.7x6.8mm-20℃~+70℃ 10,000 cycles 10.4mm 12.7mm 30V 500mA 6.8mm Black PC Pin Rectangular Columnar SPDT Through Hole 插件-3P,12.7x6.8mm Slide Switches ROHSCUISlide Switches
USB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdPCB
Contains some PCBs by Atharva.
Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R9, R10, R11, R14, R15, R21, R23, R24, R25 |
| 5 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C7, C12, C13 |
| 4 | 240 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R4, R19 |
| 4 | ESD3.3 | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D5, D6, D8 |
| 4 | PTS810SJM250SMTR_LFS | MyFootprints:PTS810SJM250SMTRLFS | S1, S3, S4, S5 |
| 3 | 530470210 | MyFootprints:CONN02_530470210_MOL | J5, J6, J7 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C11 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C10 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R13 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 1140084168 | MyFootprints:1140084168 | J1 |
| 1 | 120Nf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 1 | 47uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 1 | 511k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | 91k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17 |
| 1 | AO3400A | MyFootprints:SOT-23-3L_AOS | U4 |
| 1 | BNO055 | Package_LGA:LGA-28_5.2x3.8mm_P0.5mm | U2 |
| 1 | Buck_Boost | MyFootprints:MICROSIP8_SIU_TEX | Buck |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | Batt |
| 1 | D_Schottky | Diode_SMD:D_SOD-323_HandSoldering | D9 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | Error_Leds | MyFootprints:WL-SFTW_3528_PLCC4 | D3 |
| 1 | POWER_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7 |
| 1 | R_US | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | SLW-1276864-4A-D | MyFootprints:SLW12768644AD | S2 |
| 1 | START_STOP_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | SYNC_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | USB4105-GF-A | MyFootprints:USB4105_GCT | J3 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U5 |
| 1 | UVLO | MyFootprints:SOT95P237X112-3N | IC1 |
The 66 most common of 70 parts.
More from Athyo30/PCB
1Similar boards
- 4 layers110 × 80 mm
Esp32p4 extreme
Andreuxxx1977/esp32-p4
An open-hardware, actively cooled ESP32-P4 board for heavy multimedia work: a 2-lane MIPI camera, a 2-lane MIPI display, USB 2.0 High-Speed, 10/100 Ethernet, UHS-I microSD, 32 MB flash and 32 MB PSRAM.
234 parts1CERN-OHL-P-2.0 - 2 layers54.2 × 55 mm
HM mainboard
vanessaPrankl/HeadMouse
This project provides hardware, enclosure and software for the head-motion based computermouse HeadMouse.
63 parts2 - 4 layers53 × 85 mm
- 4 layers54.4 × 53.3 mm
- 4 layers36.5 × 69 mm
Storm tracker
solderable/storm-tracker-hardware
Open-source-ready Storm Tracker hardware design, documentation, BOM, and manufacturing package
102 parts58 - 2 layers38.1 × 63.5 mm
Sstv backpack
vaugerbird/sstv-backpack
A ESP32-CAM SSTV backpack for the Baofeng UV-5R + others!
29 parts94GPL-2.0 - 2 layers73 × 93 mm
- 2 layers71 × 68.9 mm
Heart Pendant
chasestuard07/Breathing-LED-Heart-PCB
Custom battery-powered PCB featuring LEDs that turn on and off with a breathing effect.
20 parts
Questions
How big is the GoldenForm 1 PCB?
It measures 60.4 × 46.1 mm and has 4 copper layers, 1.61 mm thick.
What parts does the GoldenForm 1 use?
70 parts, built around the ESP32-S3-WROOM-1-N8, AO3400A, BNO055 and USBLC6-2P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GoldenForm 1 KiCad files?
From the Athyo30/PCB repository on GitHub, at the commit this page was made from: the board is SeniorDesign/GoldenForm_1.kicad_pcb and its schematic SeniorDesign/GoldenForm_1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GoldenForm 1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).