
Openrz67-nrf
mhellevang/openrz67-trigger
Bluetooth remote release for the Mamiya RZ67: ESP32-C3 firmware, KiCad PCB and enclosure. Shutter, bulb and countdown from your phone.
KiCad boards from 60 GitHub repositories tagged “esp32-c3”, the most starred first; open any of them in PCBKit.

mhellevang/openrz67-trigger
Bluetooth remote release for the Mamiya RZ67: ESP32-C3 firmware, KiCad PCB and enclosure. Shutter, bulb and countdown from your phone.


mjhaahr/RGB-LED-Pendant
Small RGB LED Pendant using 1010 (1.0x1.0mm) WS2812B LEDs powered by an ESP32-C3 Mini with a BNO055 IMU

PE1RGU/hf-antenna-switch
Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.


danpham/nixie_clock
ESP32-C3 Nixie clock using IN14/IN3 tubes and HV5622 driver.

EngMeesh/ESP32_IoT_Dev_Board
A custom 4-layer IoT development board based on the ESP32-C3, featuring integrated LiPo battery management, a CP2102N USB-UART bridge, MicroSD support, and onboard environmental/audio sensors for embedded engineering…

nikolaus018/garageDoor-pro
ESP32-C3 + GPS board that opens the garage door when you leave and arrive: firmware, KiCad PCB and perfboard build

SarthakDas2006/ESP32-C3-IoT-Embedded-Custom_PCB
4-layer ESP32-C3 based custom embedded IoT PCB featuring onboard temperature & humidity, light, and audio sensing, USB Type-C, Li-Po charging, and external flash memory.

turfptax/uTalkTimer
uTalkTimer: An async ESPNOW-based MicroPython Device used for efficient discussion management in meetings, featuring speaker time tracking, speech queuing, and voting functionalities.


YORROY123/kicad-scripted-pcb
Three KiCad 10 PCBs designed entirely as Python code with layered verification

zeugmaster/nucula-board
Nucula Board: an ESP32-C3 hardware prototype with USB-C, PN7160 NFC, OLED and detachable keyboard. KiCad sources and manufacturing files.

akashihi/P11
ESPHome interface for Panasonic air conditioners and heat pumps (CN-CNT)

Alexden28/esp32c3-sensor-node-pcb
2-layer ESP32-C3 + SHT40 USB-C sensor node in KiCad 10, generated from Python, autorouted, ERC/DRC clean, with Gerbers/BOM/CPL/STEP

aprskalo1/nano24-elrs-receiver
nano24: compact 2.4 GHz ExpressLRS receiver prototype with ESP32-C3, SX1281, CRSF and a printed Wi-Fi antenna. KiCad sources, BOM, Gerbers and validation notes.

aramder/orc
Open replacement controller board for surplus Motorola PMUN1046A relay boxes: ESP32-C3, CANopen control, 10 x 15 A channels. Independent project, not affiliated with Motorola Solutions.

ariemeir/family-comms-signal
A traffic light for the office door: a SwiftUI app, a 290-line aiohttp and bleak BLE bridge, ESP32-C3 firmware, a custom two-layer KiCad board, and a Fusion 360 script that generates the enclosure. In daily use.

ashfaque-ur-rahman/ESP32-Multi-Sensor-PCB
ESP32-based multi-sensor PCB with temperature/humidity, light, and microphone sensors — 4 layer Board — KiCad design based on Tech Explorations tutorial

d0ng3o/esp32_turd_scooter_controller
Open-source ESP32-C3 replacement control board + ESP-IDF firmware for a decommissioned Bird One e-scooter, plus the reverse-engineered Lishui one-wire bus protocol.

draarivpatel-ui/blare-clock
BlareClock: XIAO ESP32-C3 desk alarm clock with 2.25in ST7789 TFT, DS3231 RTC, 85dB piezo buzzer, KiCad 8 PCB, and OpenSCAD enclosure


EldinLz/esp32-sensor-daq
Custom ESP32-C3 sensor data acquisition PCB, firmware, fabrication files, and validation plan.

ElevenOctober/quark
A plug-and-play ESP32-C3 desktop monitor for real-time Codex AI usage, quotas, tokens, and system telemetry.