4 layers50 × 60 mm
PiCCANTE OBD Dongle
Alia5/PiCCANTE
PiCCANTE is a powerful tool for exploring and reversing CAN busses of vehicles, based on Raspberry Pi Pico (any model)
35 parts104GPL-3.0
CAN
30 boardsKiCad boards from 24 GitHub repositories tagged “can”, the most starred first; open any of them in PCBKit.
- 4 layers100 × 94 mm
- 2 layers87.5 × 70 mm
010 Implementation
NewTec-GmbH/esp32-can-iot
A ESP32 based interface between CAN-bus and IoT environments.
70 parts51BSD-3-Clause - 2 layers67.3 × 54 mm
Jeep radio
latonita/jeep-canbus
Projects around CAN BUS in Chrysler Jeep - VES enabler, other small features
52 parts30MIT - 2 layers28.8 × 14.3 mm
Tap Photosensor PCB
Qballjos/Voron-2.4-Otopus-pro-SB2209-U2C-CAN
Voron 2.4 R2 with ,Stealthburner, Voron Tap, Bambu lab Hotend. Octopus pro with TMC2209 UART, EBB SB2209 v1.0 and U2C v2.1 running klipper
12 parts21 - 2 layers124 × 40 mm
RedFIS
tothpetiszilard/a3_8p_redFIS
Hacking into Audi A3 8P Driver Information System
77 parts15AGPL-3.0 - 2 layers50.3 × 54 mm
JK BMS CAN
dremeier/Arduino-JK-BMS-To-Pylontech-CAN-PCB
PCB and Case for the Arduino JK-BMS To Pylontech CAN converter
66 parts9 - 4 layers35 × 35 mm
Foc8313
williamhaarhoff/foc8313
Highly compact field oriented controller based on the DRV8313 IC
155 parts9 - 2 layers30.7 × 17.6 mm
OtterPill CAN
Jana-Marie/OtterPill-CAN-Adapter
CAN-adapter for the OtterPill running candleLight firmware.
10 parts7 - 4 layers160 × 105.4 mm
SolarCarECU
solarcaratuva/EmbeddedSystem
UVA Solar Car Embedded Systems PCB design and ECU code
231 parts7 - 4 layers74 × 28 mm
- 2 layers19.2 × 34 mm
- 2 layers49.8 × 63.2 mm
Edgeberry console cartridge
Edgeberry/Edgeberry-HWCartridge-ConsoleCAN
An Edgeberry Hardware Cartridge with a CAN-bus interface and USB console access
88 parts4CERN-OHL-W-2.0 - 2 layers50 × 61 mm
ENP KIT-232-485-CAN
Enapter/ucm-kit-open-hardware
Enapter UCM Kit – open hardware for connecting your energy devices.
32 parts4 - 2 layers89.8 × 55.3 mm
- 4 layers53 × 32 mm
Ubiquitous waddle
leonwip/ubiquitous-waddle
Dual channel CANnectivity CAN FD to USB-C adapter
44 parts3CERN-OHL-P-2.0 - 4 layers66.5 × 57 mm
- 2 layers70 × 81 mm
Glr-2024e bms can shield
green-lion-racing/glr-2024e-bms-can-shield
NUCLEO-G474RE compatible CAN shield.
18 parts1MIT - 2 layers60.4 × 98.7 mm
Glr pcb display can shield
green-lion-racing/glr-pcb-display-can-shield
STM32F469I-DISCO compatible CAN shield.
30 parts1GPL-3.0 - 2 layers19.8 × 40.1 mm
GH4PIN01
mlab-modules/GH4PIN01
This 4-pin module connects JST-GH connectors, often used in Pixhawk drones, to standard pin headers, making it easier to build custom electronics and use I2C or CAN bus communication.
11 parts1GPL-3.0 - 2 layers70 × 75 mm
WritingRobotV2
thekonon/WritingRobot
My repo for CAN comunication between Raspberry (Python UI) and STM32 MCU
25 parts1 - 2 layers117.3 × 63 mm
Embeddster
alheir/embeddster
Embeddster is a platform for the 25.27 - Sistemas Embebidos course at ITBA (Instituto Tecnológico de Buenos Aires), using an ESP32 to test and assist with TPs.
36 partsMIT - 2 layers102 × 84 mm
RelayCard
chapppy/Board-for-Relay-Card
Design of schematic and PCB for Relay Card control over USB and CAN based on STM32
81 partsGPL-3.0 - 4 layers36.4 × 55.2 mm
