Skip to the content

Interfaces and adapters

7,328 boards
  • 2 layers18.8 × 18.4 mm4-Channel Level Shifter, the printed circuit board in 3D

    4-Channel Level Shifter

    domesticmouse/4-Channel-Level-Shifter

    This board is a 4-channel bidirectional logic level converter designed to safely interface between different voltage domains (typically 3.3V and 5V).

    16 partsCERN-OHL-S-2.0
  • 4 layers42.8 × 67.5 mmPCB Interface, the printed circuit board in 3D

    PCB Interface

    Domfunkle/NHP_Synth

    This project implements a dual-channel Direct Digital Synthesis (DDS) signal generator on the ESP32 platform. It features:

    80 parts
  • 4 layers31 × 31 mmD02Bus, the printed circuit board in 3D

    D02Bus

    dominikbayerl/D02Bus

    A hardware & firmware project bridging D0 Optical energy meter interfaces to Modbus RTU (RS485). Features a CH552G MCU and Eastron-compatible register mapping for easy integration.

    40 parts
  • 2 layersCansat final, the printed circuit board in 3D

    Cansat final

    domokosdcs0/CanBus_CS25HU

    PCB for the CanBus team's CanSat for CanSat Hungary 2025.

    17 partsCC-BY-SA-4.0
  • 2 layers19.2 × 40.7 mmBMI270 breakout, the printed circuit board in 3D

    BMI270 breakout

    donaldintech/CAP126_Breakout

    files for the CAP1206 Breakout board

    25 partsMIT
  • 2 layersDsbi, the printed circuit board in 3D

    Dsbi

    donarturo11/dsbi

    Damn Simple Brainwave Interface

    20 partsGPL-3.0
  • 2 layers45 × 25 mmPMW3325DB, the printed circuit board in 3D

    PMW3325DB

    donoMondes/PMW3325DB-breakout

    A pcb breakout board for the PMW3325DB-TWV1 mouse optical sensor by Pixart

    16 partsCC0-1.0
  • 2 layers32.6 × 13.5 mmFTDI Adapter, the printed circuit board in 3D

    FTDI Adapter

    donpivo/FTDI_Adapter_FFC_USB

    15 parts
  • 2 layers150 × 142 mmMax power, the printed circuit board in 3D

    Max power

    doragasu/max-power

    This is just a dumb PCB that I designed to end with the big mess of wall adapters I have under my TV, powering two RaspberryPi boards, several hard disks, routers, a USB hub, an HDMI to optical splitter, and maybe…

    50 parts
  • 4 layers50 × 50 mmHub usb sd, the printed circuit board in 3D

    Hub usb sd

    dougsthenri/hub_usb_sd

    PCB project for an SD card reader with 2-port USB hub and I²C bridge

    65 parts
  • 2 layers100 × 100 mmLtc3331-breakout, the printed circuit board in 3D

    Ltc3331-breakout

    dpiegdon/ltc3331-breakout

    Cheap alternative dev-board for the LTC3331 energy harvesting chip

    73 parts
  • 2 layers90.4 × 98.7 mmFluidnc bob revD, the printed circuit board in 3D

    Fluidnc bob revD

    drewsipher/sharkcnc

    Open CNC control stack for a Sherline 2000: FluidNC ESP32-S3 breakout hardware + host software plan

    66 parts
  • 4 layers50 × 50 mmUSB Hub, the printed circuit board in 3D

    USB Hub

    drewsum/USB_Hub

    A DIY USB hub with digital monitoring on all ports

    206 partsGPL-3.0
  • 2 layers25.4 × 33 mmE73-breakout, the printed circuit board in 3D

    E73-breakout

    ducky64/e73-breakout

    E73-2G4M04S1(A/B) breakout board, in a breadboardable form factor with a 10-pin 1.27mm-pitch SWD header

    20 partsBSD-3-Clause
  • 2 layers156.2 × 100.3 mmMicrocompuer, the printed circuit board in 3D

    Microcompuer

    DukkyCode/Microcomputer-Design

    Chip Specification: - XR68C681CJ-F – DUART: the XR68C681 devices offers a single IC solution for the 68000 family of microprocessors.

    70 parts
  • 2 layers63.5 × 43.2 mmEpaper breakout, the printed circuit board in 3D

    Epaper breakout

    duplico/qc16_badge

    Queercon 16 badge code

    21 parts
  • 4 layers63 × 55 mmCAN BUS sniffer, the printed circuit board in 3D

    CAN BUS sniffer

    dvallemo/CANBUS-Sniffer-PCB

    Built a four-layer STM32-based CAN bus sniffer PCB to detect and translate CAN codes from a vehicle

    46 parts
  • 2 layers33.6 × 52.1 mmPower breadboard adapter, the printed circuit board in 3D

    Power breadboard adapter

    dwmorrin/power-breadboard-adapter

    PCB files for a Eurorack power to breadboard adapter.

    6 parts
  • 4 layers55.9 × 30.2 mmUsb hub, the printed circuit board in 3D

    Usb hub

    Dygmalab/neuron

    Licensed under CERN-OHL and distributed as is without any additional warranty or documentation.

    66 parts
  • 10 layers90 × 60 mmZebra X, the printed circuit board in 3D

    Zebra X

    Dylanfg123/Zebra-X

    A Xilinx Zynq Demo Board based on Phil's Lab ZettBrett board

    424 parts
  • 2 layers38.3 × 21.7 mmStm32-pwr adapter, the printed circuit board in 3D

    Stm32-pwr adapter

    e3dz/stm32-v3pwr-adapter

    A TC2030 adaptor for the STM32-V3PWR + a bit hacky UART and a trickle charge resistor

    6 parts
  • 2 layers67.3 × 55.9 mmPCF2123, the printed circuit board in 3D

    PCF2123

    earnest-gakure/-PCF2123_RTC_SPI-

    The PCF2123 is a CMOS1 Real-Time Clock (RTC) and calendar optimized for low power applications. Data is transferred serially via a Serial Peripheral Interface (SPI-bus).

    15 parts