
ExternalPCB
Kllngii/Wetterstation
Es sollen mit einem Mikrocontroller mehrere Sensordaten erfasst und aufbereitet werden

PCB for the CanBus team's CanSat for CanSat Hungary 2025.
Cansat final is an open-source printed circuit board by domokosdcs0, from the domokosdcs0/CanBus_CS25HU repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board with 17 parts on 26 nets, routed with 87 tracks and 5 vias.
It is built around the TPS61222DCK, BME280 and PK0608-100MB, with the QMB-09B-03 among its other parts. Its parts include 9 connectors, 2 capacitors, 2 ICs, 2 switches and 1 inductor. It belongs with the interfaces and adapters boards of this library.
PCB for the CanBus team's CanSat for CanSat Hungary 2025.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uF | EasyEDA:CAP-TH_BD5.0-P2.00-D0.5-FD-1 | C1, C2 |
| 1 | BAT_CLAMP | EasyEDA:CONN-SMD_2P-P4.00_HDGC4001SMD-S-2P | CN1 |
| 1 | BME280 | EasyEDA:CONN-TH_XH-4A | CN4 |
| 1 | ESP_L | EasyEDA:HDR-TH_8P-P2.54-V-F-1 | P1 |
| 1 | ESP_R | EasyEDA:HDR-TH_8P-P2.54-V-F-1 | P2 |
| 1 | EXTRA | EasyEDA:CONN-TH_XH-4A | CN7 |
| 1 | FLASH | EasyEDA:SW-SMD_L6.0-W3.3-LS8.0 | SW2 |
| 1 | GPS | EasyEDA:CONN-TH_XH-4A | CN2 |
| 1 | LoRa | EasyEDA:CONN-TH_XH-4A | CN3 |
| 1 | MPU6500 | EasyEDA:CONN-TH_XH-4A | CN5 |
| 1 | OLED | EasyEDA:CONN-TH_XH-4A | CN6 |
| 1 | PK0608-100MB | EasyEDA:IND-TH_BD7.0-P2.50-D0.7 | L1 |
| 1 | PWR | EasyEDA:SW-TH_SK12D07VG3 | SW1 |
| 1 | QMB-09B-03 | EasyEDA:BUZ-TH_BD9.0-P4.00-D0.6-FD | BUZZER1 |
| 1 | TPS61222 | EasyEDA:SC-70-6_L2.2-W1.3-P0.65-LS2.1-BR | U1 |
| 1 | USB-TTL | EasyEDA:HDR-TH_6P-P2.54-V-F | U2 |

Kllngii/Wetterstation
Es sollen mit einem Mikrocontroller mehrere Sensordaten erfasst und aufbereitet werden

ben-labs-ltd/BL-N305X
Meshtastic intended LoRa Node - Ben Labs Node 30.5dBm



ademuri/air-filter-controller
The ESP32-S3 uses 3.3V. I want onboard indicator LEDs, and the option to have offboard LEDs as well. Using addressable WS2812-type LEDs is flexible. These need a 5V supply.


Ash1of1/FlightRecorder
FR-1 is a standalone rocket telemetry module. It samples pressure/altitude, temperature, acceleration, and gyro data, and serves a live dashboard over its own WiFi network — no internet, router, or app install required.

17 parts, built around the TPS61222DCK, BME280, PK0608-100MB and QMB-09B-03. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the domokosdcs0/CanBus_CS25HU repository on GitHub, at the commit this page was made from: the board is kicad/cansat_final.kicad_pcb and its schematic kicad/cansat_final.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).