Skip to the content
123456

TPS61222DCK

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 200mA 5V 700mV~5.5V Boost Boost Built-in Fixed Yes SC-70-6(SOT-363) DC-DC Converters ROHS

Part id
ti/TPS61222DCK
Category
DC DC Converters
Package
SC-70-6(SOT-363)
Pins
6
In stock
6,192 at JLCPCB (C116461)
Used on
29 open-source boards

Overview

The TPS61222DCK is a DC DC Converter made by Texas Instruments in a SC-70-6(SOT-363) package with 6 pins. -40℃~+125℃@(TJ) 1 200mA 5V 700mV~5.5V Boost Boost Built-in Fixed Yes SC-70-6(SOT-363) DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS61222DCK, from KiCad's library) and its footprint (Package_TO_SOT_SMD:Texas_R-PDSO-G6, from KiCad's library), ready for a KiCad board. 6,192 are in stock at JLCPCB (part C116461). 29 open-source boards in 20 repositories on GitHub use it.

Symbol

1VIN2FB3GND4VOUT5L6EN
Regulator_Switching:TPS61222DCKFrom KiCad's library

Footprint

123456
Package_TO_SOT_SMD:Texas_R-PDSO-G6From KiCad's library

From the datasheet

13
Supply, least
700 mV · VIN, recommended operating min · p. 4
Supply, most
5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
7.5 V · VIN, absolute maximum · p. 3
Works from
-40 °C · TA, operating ambient min · p. 3
Works up to
85 °C · TA, operating ambient max · p. 3
Junction, hottest
150 °C · Operating junction temperature absolute max · p. 3
Takes working
5.5 µA · sum of VIN and VOUT quiescent currents, typical, IO = 0 mA, VEN = VIN = 1.2 V, VOUT = 3.3 V · p. 4
Takes asleep
200 nA · VIN shutdown current typical, VEN = 0 V, VIN = 1.2 V, VOUT ≥ VIN · p. 4
Current limit
400 mA · Switch current limit typical, VOUT = 3.3 V · p. 4
Output
5 V · TPS61222 output voltage typical, VIN < VOUT · p. 4
Junction to air (DCK)
231.2 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (DCK)
61.8 K/W · Junction-to-case (top) thermal resistance · p. 4
Junction to board (DCK)
78.8 K/W · Junction-to-board thermal resistance · p. 4

What it is and has

8
Efficiency
Up to 95% at typical operating conditions · p. 1
Quiescent current
5.5 μA · p. 1
Startup
Into load at 0.7 V input voltage · p. 1
Shutdown
Pass-through function · p. 1
Package
6-pin SC-70 · p. 1
Protection
Output overvoltage · p. 1
Protection
Overtemperature · p. 1
Protection
Input undervoltage lockout · p. 1

Specifications

36
ParameterConditionsAs printedPage
Input voltage on VIN, L, VOUT, EN, FB VINover operating free-air temperature rangemin -0.3 · max 7.5 V3
Operating junction temperature TJmin -40 · max 150 °C3
Storage temperature range Tstgmin -65 · max 150 °C3
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pinsmin -2 · max 2 kV3
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pinsmin -1.5 · max 1.5 kV3
Supply voltage at VIN VINmin 0.7 · max 5.5 V4
Operating virtual junction temperature TJmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJATPS6122x, DCK, 6 PINStyp 231.2 °C/W4
Junction-to-case (top) thermal resistance RθJCtopTPS6122x, DCK, 6 PINStyp 61.8 °C/W4
Junction-to-board thermal resistance RθJBTPS6122x, DCK, 6 PINStyp 78.8 °C/W4
Junction-to-top characterization parameter ψJTTPS6122x, DCK, 6 PINStyp 2.2 °C/W4
Junction-to-board characterization parameter ψJBTPS6122x, DCK, 6 PINStyp 78 °C/W4
Input voltage VINmin 0.7 · max 5.5 V4
Minimum input voltage at startup VINRLoad ≥ 150 Ωmax 0.7 V4
TPS61222 output voltage (5 V) VOUTVIN < VOUTmin 4.82 · typ 5 · max 5.13 V4
Inductor current ripple ILHtyp 200 mA4
switch current limit ISWVOUT = 3.3 V, VIN = 1.2 V, TA = 25°Cmin 240 · typ 400 mA4
switch current limit ISWVOUT = 3.3 Vmin 200 · typ 400 mA4
Rectifying switch on resistance RDSon_HSDVOUT = 3.3 Vtyp 1000 mΩ4
Rectifying switch on resistance RDSon_HSDVOUT = 5.0 Vtyp 700 mΩ4
Main switch on resistance RDSon_LSDVOUT = 3.3 Vtyp 600 mΩ4
Main switch on resistance RDSon_LSDVOUT = 5.0 Vtyp 550 mΩ4
Line regulationVIN < VOUTtyp 0.5 %4
Load regulationVIN < VOUTtyp 0.5 %4
Quiescent current IQVIN; IO = 0 mA, VEN = VIN = 1.2 V, VOUT = 3.3 Vtyp 0.5 · max 0.9 uA4
Quiescent current IQVOUT; IO = 0 mA, VEN = VIN = 1.2 V, VOUT = 3.3 Vtyp 5 · max 7.5 uA4
Shutdown current VIN ISDVEN = 0 V, VIN = 1.2 V, VOUT ≥ VINtyp 0.2 · max 0.5 uA4
Leakage current into VOUT ILKG_VOUTVEN = 0 V, VIN = 1.2 V, VOUT = 3.3 Vtyp 1 uA4
Leakage current into L ILKG_LVEN = 0 V, VIN = 1.2 V, VL = 1.2 V, VOUT ≥ VINtyp 0.01 · max 0.2 uA4
EN input current IENClamped on GND or VIN (VIN < 1.5 V)typ 0.005 · max 0.1 uA4
EN input low voltage VIL5 V > VIN > 1.5 Vmax 0.4 V4
EN input high voltage VIH5 V > VIN > 1.5 Vmin 1.2 V4
Undervoltage lockout threshold for turn off VUVLOVIN decreasingtyp 0.5 · max 0.7 V5
Overvoltage protection thresholdmin 6 · max 7.5 V5
Overtemperature protectiontyp 140 °C5
Overtemperature hysteresistyp 20 °C5

Pins, by the datasheet

6
1 VIN
Boost converter input voltage. · p. 3
2 FB
Voltage feedback; must be connected to VOUT for fixed output voltage versions. · p. 3
3 GND
Control / logic and power ground. · p. 3
4 VOUT
Boost converter output voltage. · p. 3
5 L
Connection for Inductor. · p. 3
6 EN
Enable input (1: enabled, 0: disabled); must be actively tied high or low and must not float. · p. 3

Ordering codes, by the datasheet

1
TPS61222DCK
6-pin SC-70 · 5.0 V fixed output; package marking CKT · p. 3

Open-source boards using it

29See all 29
  • 4 layers24.4 × 35.6 mmAFE 03, the printed circuit board in 3D

    AFE 03

    NeDaMo93/Wearable_ECG_ADS1293_nrf52840

    Software for a Functional Demonstrator of a Medical Wearable for ECG and Activity Monitoring with Wireless Communication. With ADS1293, nrf52840, LSM6DSO. Includes an Android App and Python GUI.

    41 parts7
  • 2 layers44.8 × 36 mmPanel, the printed circuit board in 3D

    Panel

    jeffc/nrf52-watch-obsolete

    obsolete repository - see https://github.com/jeffc/nrf52-watch-firmware

    68 parts6
  • 4 layers140 × 88.4 mmBenboard, the printed circuit board in 3D

    Benboard

    ben-labs-ltd/benboard

    The BenBoard Split Ergo Mechanical Keyboard

    111 parts5GPL-3.0
  • 4 layers25.4 × 20 mm520nm i2c 16mA, the printed circuit board in 3D

    520nm i2c 16mA

    iorodeo/i_control_led

    Hardware files for IO Rodeo's current controlled led for the open colorimeter

    32 parts3CC-BY-4.0
  • 2 layers58.4 × 127 mmExternalPCB, the printed circuit board in 3D

    ExternalPCB

    Kllngii/Wetterstation

    Es sollen mit einem Mikrocontroller mehrere Sensordaten erfasst und aufbereitet werden

    31 parts2
  • 2 layersMeshtastic node, the printed circuit board in 3D

    Meshtastic node

    ben-labs-ltd/BL-N305X

    Meshtastic intended LoRa Node - Ben Labs Node 30.5dBm

    115 parts1MIT
  • 4 layers40.5 × 80.2 mmNULL, the printed circuit board in 3D

    NULL

    jadenvv/NULL

    A version of a flipperzero that has the same capabilities of Sub-GHz RF, IR, Wifi, and NFC/RFID

    121 parts1
  • 2 layers100.1 × 50.8 mmStm32, the printed circuit board in 3D

    Stm32

    jonatlib/stm32-433mhz

    Testing program stm32-433mhz

    59 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS61222DCK?

Yes. The symbol is Regulator_Switching:TPS61222DCK and the footprint Package_TO_SOT_SMD:Texas_R-PDSO-G6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS61222DCK?

SC-70-6(SOT-363), with 6 pins. Its footprint is drawn on this page.

Where is the TPS61222DCK datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS61222DCK?

JLCPCB lists it as part C116461, with 6,192 in stock; the sellers' links on this page open their listings.

What can replace the TPS61222DCK?

Parts like it in the library: the XL1509-5.0E1 by XLSEMI, the XL2596S-5.0E1 by XLSEMI, the LM2596SX-5.0 by Texas Instruments and the LM2596S-5.0 by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS61222DCK?

29 boards in 20 repositories on GitHub; the most starred are listed on this page, with their KiCad files.