
Templog mainboard
Michael-Manning/E-Paper-Climate-Logger
Firmware, PCB, and enclosure for the Weathergotchi E-Paper climate logger.

Queercon 16 badge code
Epaper breakout is an open-source printed circuit board by duplico, from the duplico/qc16_badge repository on GitHub. It is a 2-layer board of 63.5 × 43.2 mm with 21 parts on 24 nets, routed with 128 tracks and 20 vias.
It is built around the MBR0530 and SI1308EDL. Its parts include 12 capacitors, 3 diodes, 2 resistors, 2 connectors and 1 transistor. It belongs with the lEDs and displays and interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1uF | Capacitors_SMD:C_0805_HandSoldering | C3, C4, C5, C6, C7, C8, C9, C10, C11, C12 |
| 3 | MBR0530 | Diodes_SMD:D_SOD-123 | D1, D2, D3 |
| 2 | 4.7uF | Capacitors_SMD:C_0805_HandSoldering | C1, C2 |
| 1 | 0.47 | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | 10k | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 10uH | Inductors_SMD:L_1210_HandSoldering | L1 |
| 1 | Conn_01x10 | Socket_Strips:Socket_Strip_Straight_1x10_Pitch2.54mm | J1 |
| 1 | Si1308EDL | TO_SOT_Packages_SMD:SOT-323_SC-70_Handsoldering | Q1 |
| 1 | epaper_fpc24 | dianwei_fpc20:fpc24 | P1 |

Michael-Manning/E-Paper-Climate-Logger
Firmware, PCB, and enclosure for the Weathergotchi E-Paper climate logger.


EnriqueNeyra/Aeroq
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54

EnriqueNeyra/aether
All-in-one home air quality monitor measuring Temp, Humidity, CO2, VOCs, Particulate Matter, and NOx. Powered by ESP32-C3 running esphome, and built with Home Assistant integration

solderable/storm-tracker-hardware
Open-source-ready Storm Tracker hardware design, documentation, BOM, and manufacturing package

martinberlin/bistable-smart-switch
An epaper switch project with 2 PCBs, controller+touch, and 220AC to 3DC with Relay (Latch or solid-state)

UCBioengineering/open_source_insulin_pump
This repository contains software and hardware files for building an open source insulin pump. Files were created by the team at UC Bioengineering, University of Canterbury, Christchurch, New Zealand.
It measures 63.5 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the MBR0530 and SI1308EDL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the duplico/qc16_badge repository on GitHub, at the commit this page was made from: the board is boards/epaper_breakout/epaper_breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask duplico before reusing the design.