2 layers71.7 × 27.7 mm
GR KS0835F SLIC Breakout
GadgetReboot/KS0835F_Phone_SLIC
KS0835F phone line SLIC module breakout pcb
25 parts37
Interfaces and adapters
7,328 boards- 4 layers98.8 × 85.1 mm
- 2 layers29 × 12 mm
Ubmp v1
korken89/micro-bmp
A small Black Magic Probe based on the pinout of the STLink V2 support firmware
25 parts37 - 4 layers40.1 × 39.8 mm
Stm32g431-mt6701-stspin233
VIPQualityPost/aioli-foc
Small, simple closed loop BLDC driver implementing SimpleFOC
90 parts37 - 2 layers85 × 56 mm
Pico pi base
bablokb/pcb-pico-pi-base
An Interface PCB to use Pi-Hats with a Pi-Pico(w)
20 parts36CC-BY-SA-4.0 - 2 layers31.7 × 21.8 mm
Bump
electronut/ElectronutLabs-Bumpy
An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.
24 parts36 - 2 layers13.3 × 15.8 mm
USB C Adapter
makhowastaken/USB_C_Breakout
Small, cheap USB Type C breakout boards for power only or USB 2.0 data installations
4 parts36GPL-3.0 - 2 layers91.2 × 48.3 mm
- 2 layers148.8 × 132.2 mm
Usbflashprog
robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
125 parts36 - 2 layers47 × 25 mm
Monotron cv adapter
matthewcieplak/monotron-cv-adapter
A eurorack control voltage to Korg Monotron CV adapter board.
8 parts35 - 2 layers25.8 × 20.3 mm
Flipper as7331 adapter
michaelbaisch/uv_meter
A Flipper Zero application to measure UV radiation using the AS7331 sensor.
5 parts35GPL-3.0 - 2 layers100 × 70 mm
SFP breakout
aewallin/SFP-Breakout-Board
SFP fibre-optical transciever simple breakout board. Works up to at least 1 Gbit/s.
47 parts34 - 2 layers49.5 × 35.6 mm
WLED Controller
f2daz/WLED_PCB_D1_Mini
PCB for WLED with WeMos D1 Mini and SN74AHCT125N level shifter
12 parts34MIT - 2 layers90 × 40 mm
Esp32-tlk110
kazkojima/esp32-phy
KiCAD files and apps for ESP-WROOM-32 ethernet boards
57 parts34GPL-3.0 - 4 layers70 × 91.8 mm
Mini pcie m.2-key m adapter
TobleMiner/M.2-NVMe-SSD-to-miniPCIe-adapter
A simple M.2 NVMe to miniPCIe adapter
44 parts34MIT - 2 layers64 × 39 mm
SigmaLink USBi
freeDSP/SigmaLink-USBi
The freeDSP SigmaLink USBi PROGRAMMER is an all-in-one real-time programming interface.
31 parts33CC-BY-SA-4.0 - 2 layers47 × 55.9 mm
Pico adapter
beroset/pico-puller
A Raspberry Pi Pico-based memory dumper for the M16C processor
2 parts32BSD-3-Clause - 2 layers55 × 48.8 mm
Mtch6102 breakout
sekigon-gonnoc/mtch6102_breakout
Breakout board of MTCH6102, a 2D capacitive touch sensor, for DIY split keyboards with TRRS connectors.
78 parts32 - 2 layers118.1 × 99.9 mm
ZX Interface 2021
tebl/ZX-Interface-2.021
An old-school remake of the ZX Interface 2 with some modern tweaks - mainly by integrating bank switching into the interface itself.
58 parts32 - 2 layers17 × 18.5 mm
- 2 layers23.9 × 26 mm
- 2 layers44.4 × 14.2 mm
Bridge v1
chrisg20/CarThingBridge
A compact connector board for the Spotify Car Thing and Raspberry Pi Zero.
9 parts30CC0-1.0 - 2 layers101.6 × 53.3 mm
- 2 layers30.8 × 36.5 mm
