Skip to the content
2 layers100 × 70 mmSFP breakout, the printed circuit board in 3D

SFP fibre-optical transciever simple breakout board. Works up to at least 1 Gbit/s.

Size
100 × 70 mm
Copper layers
2
Thickness
1.6 mm
Parts
47
Nets
32
Pads
171
Tracks, vias
250, 132
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 Feb 2020
Updated
20 Oct 2025

Overview

SFP breakout is an open-source printed circuit board by aewallin, from the aewallin/SFP-Breakout-Board repository on GitHub. It is a 2-layer board of 100 × 70 mm with 47 parts on 32 nets, routed with 250 tracks and 132 vias.

It is built around the 74HC14. Its parts include 13 capacitors, 9 resistors, 8 connectors, 5 diodes and 2 ICs. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

README.md

SFP-Breakout-Board

SFP fibre-optical transciever simple breakout board. Works up to at least 1 Gbit/s.

  • differential TX+/TX- RX+/RX- outputs/inputs with SMA connectors
  • connector and cage for SFP or SFP+ transciever
  • +3V3 power for transciever
  • Three status LEDs for TX_FAULT, LOS, and MOD_ABS
  • jumpers for SFP rate-select settings.

PCB

Board

SA

Spectrum analyzer measurement of tracking-generator output to Tx-board with SFP, short 2 m fiber, and RX-output of receiving board with SFP. Bandwidth up to ca 1.8 GHz.

See also these other similar projects:

Parts

47
QtyValueFootprintReferences
13CCapacitor_SMD:C_0805_2012MetricC101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112, C113
57kResistor_SMD:R_0805_2012MetricR104, R105, R107, R108, R109
4Conn_CoaxialConnector_Coaxial:SMA_Amphenol_132289_EdgeMountJ104, J105, J106, J107
4LEDLED_SMD:LED_0805_2012MetricD102, D103, D104, D105
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_DIN965_PadH101, H102, H103, H104
4RResistor_SMD:R_0805_2012MetricR101, R102, R103, R106
2LInductor_SMD:L_0805_2012MetricL101, L102
174HC14Package_SO:TSSOP-14_4.4x5mm_P0.65mmU102
1Conn_01x02TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_HorizontalJ102
1Conn_02x02_Counter_ClockwiseConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ103
1DawallinKiCadFootprints:DIODE_DO-214BAD101
1JumperConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP101
1LT1963AxQ-3.3Package_TO_SOT_SMD:TO-263-5_TabPin3U101
1SFP-CONNECTORawallinKiCadFootprints:Connector_SFP_and_CageP101
1TestPoint_2PoleConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalTP101
1USB_B_MicroConnector_USB:USB_Micro-B_Molex-105017-0001J101

The 45 most common of 47 parts.

Similar boards

  • 2 layers89.2 × 82.6 mmDesktop 50 Pin TopConn, the printed circuit board in 3D

    Desktop 50 Pin TopConn

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    108 parts459GPL-3.0
  • 2 layers88.9 × 98.4 mmKickstart switcher-12up, the printed circuit board in 3D

    Kickstart switcher-12up

    keirf/pcb-projects

    The old Kickstart switcher documentation is here.

    197 parts108CC0-1.0
  • 2 layers100 × 100 mmExplorer, the printed circuit board in 3D

    Explorer

    anyshake/explorer

    🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.

    266 parts100
  • 2 layers160.1 × 101 mmPLC-14500, the printed circuit board in 3D

    PLC-14500

    nicolacimmino/PLC-14500

    Retro trainer board based on the MC14500 1-bit ICU. The project is OSHW certified and a ready to assemble kit is available on Tindie.

    173 parts70GPL-3.0
  • 4 layers69 × 74 mmShield, the printed circuit board in 3D

    Shield

    imihajlow/ethernet-to-spi

    An Ethernet to SPI converter using 7400-series ICs

    60 parts69
  • 2 layers154.9 × 139.7 mm68kBoard, the printed circuit board in 3D

    68kBoard

    transistorfet/computie

    A collection of 68k computer projects, including a unix-like operating system written in C that runs on them

    78 parts69GPL-3.0
  • 2 layers100 × 100 mmController, the printed circuit board in 3D

    Controller

    profdc9/ModularTuner

    A Modular Antenna Tuner for a Phased Array Antenna System

    180 parts59

Questions

How big is the SFP breakout PCB?

It measures 100 × 70 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SFP breakout use?

47 parts, built around the 74HC14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SFP breakout KiCad files?

From the aewallin/SFP-Breakout-Board repository on GitHub, at the commit this page was made from: the board is SFP_breakout.kicad_pcb and its schematic SFP_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SFP breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask aewallin before reusing the design.