
USB C Adapter
makhowastaken/USB_C_Breakout
Small, cheap USB Type C breakout boards for power only or USB 2.0 data installations

Small, cheap USB Type C breakout boards for power only or USB 2.0 data installations
USB C Adapter is an open-source printed circuit board by makhowastaken, from the makhowastaken/USB_C_Breakout repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 13.3 × 15.8 mm with 4 parts on 16 nets, routed with 79 tracks and 2 vias.
Its parts include 2 resistors and 2 connectors. It belongs with the interfaces and adapters boards of this library.
Small, cheap USB Type C breakout boards for power only or USB 2.0 data installations
There are two different versions, one uses a harder to solder but low profile USB 3.0 port, the other uses an easier to solder but slightly taller USB 2.0 Type C port. Both adapters have the CC lines broken out so that resistors may be added (5.1k SMD 0603) so that the adapters will work properly on USB C hosts.
Again, harder to solder but sometimes the low profile is needed. PCBs may need some filing to get the port to fit properly. Port needed is E8124-010-01 though other Type C ports may fit as well. PCBs must be 0.8mm or thinner.

Again, easier to solder but a little bit bigger. Port needed is TYPE-C-31-M-12. This is the same USB Type C port that the TP4056 modules use. PCB size should be 0.8mm or thinner but will still work fine on thicker PCBs.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | Conn_01x04_Female | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | USB_C_Receptacle | misc_footprints:E8124-010-01 | J1 |

makhowastaken/USB_C_Breakout
Small, cheap USB Type C breakout boards for power only or USB 2.0 data installations

joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
It measures 13.3 × 15.8 mm and has 2 copper layers, 1.6 mm thick.
4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the makhowastaken/USB_C_Breakout repository on GitHub, at the commit this page was made from: the board is E8124-010-01/USB_C_Adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).