Interfaces and adapters

7,328 boards

4 layers100 × 80 mm
Mouse joystick pcb
peterpolidoro/mouse-joystick-pcb
KiCad design, fabrication package and documentation for a single-axis mouse joystick controller board: RP2040, TMC5130A stepper driver, brake and torque front ends, a pyControl UART peripheral for the Janelia Dudman lab…
364 parts1
2 layers112 × 72 mm
TouCAN
PickleWorks-Design/TouCAN
USB to Can Adapter
105 parts1CC0-1.0
6 layers36.8 × 16.4 mm
Integrated Debugger
PicoballoonLabs/Debug-Boards
Hardware designs for the integrated debug probe, debug adapter, flex debug cables and RF VNA calibrator
72 parts1MIT
2 layers24.3 × 38.6 mm
A5v11-mod-01
POETSII/tiny-usb-hub
Tiny 4-port USB hub to mount on the front of PSoC 5LP development kit
26 parts1MIT
2 layers53 × 28 mm
Mspmo baord
prashantbhandary/mspmo-baord
A compact USB-C development board for TI's MSPM0G3507 (Arm Cortex-M0+, 80 MHz, 128 KB flash, 32 KB SRAM), with an on-board USB-to-UART bridge, a 3-axis accelerometer and a Tag-Connect SWD footprint.
37 parts1
2 layers169.4 × 71 mm
Transmitter PCB
PrashantHalai-212/Transmitter_PCB
A Batman inspired Batarang shaped wireless transmitter board featuring an ATmega328P microcontroller, NRF24L01 module, and onboard CH340G USB programmer.
55 parts1MIT
4 layers60.7 × 40 mm
STM32F4 REV2
pravinsharma15k-ops/STM32F4-Test-Board
STM32F405-based test board designed in KiCad 10, with buck converter, USB, SWD, I2C and UART.
52 parts1
2 layers44.5 × 26 mm
Z2breakout
projectgus/z2breakout
A (draft) breakout board for the ZipIt Z2 handheld device dock connector
15 parts1
2 layers43 × 30.5 mm
Brk st1vafe3bx
Protocentral/protocentral_st1vafe3bx_hardware
KiCad hardware design files for the ProtoCentral ST1VAFE3BX biopotential AFE + 3-axis accelerometer breakout (CERN-OHL-P v2).
53 parts1CERN-OHL-P-2.0
2 layers32.3 × 19.1 mm
ICM 20600 Breakout
PStinno/icm-20600-breakout-pcb
Breakout board for the ICM 20600 3-axis Accelerometer and Gyroscope.
22 parts1CC-BY-SA-4.0
4 layers64 × 24 mm
Debugger
QSmally/Schematics-Debugger
Schematics of a Clock Generator
36 parts1
2 layers80 × 25 mm
Serial bridge
qzed/usb-serial-bridge
Bridge converting USB-C to serial (TTL) back to USB-C.
48 parts1MIT
2 layers74.7 × 24.9 mm
Rfm69hw breakout
r-krelaus/rfm69hw-breakoutboard

12 parts1
4 layers77.1 × 49.6 mm
Hdmi to mipi dsi converter
R-Mutura/HDMI-TO-MIPI-MAIN

136 parts1
2 layers88 × 78 mm
Lan outlet
ra0sms/ethernet-control-console
Ethernet control console
58 parts1MIT
2 layers31.6 × 40.1 mm
Ad3-audio midi adapter
rafaelmartins/ad3-audio-midi-adapter
Audio/MIDI Adapter for Analog Discovery 3
13 parts1BSD-3-Clause
2 layers74.9 × 74.9 mm
ATTiny2313-Generic
RandyStockberger/ATTiny2313-Generic
Minimal Kicad board for Atmel ATtiny2313. Layout for the 2313, an ICSP header and a serial interface header
24 parts1MIT
2 layers36 × 66.5 mm
USB HUB
RatnakarSahooVSSUT/4-Port-USB-2.0-Hub
Custom 4-port USB 2.0 hub PCB designed in KiCad, featuring a GL852G controller, USB-C and USB-A interfaces.
34 parts1
2 layers40 × 25 mm
FIC-100A
Reemuson/FIC-100A
USB IR Adapter compatible with Fluke 287 and 289 series multimeters
40 parts1CERN-OHL-W-2.0
2 layers40.2 × 46.9 mm
Pm breakout cart
remy/pm-breakout
I've made myself a few of these which I'm happy to sell over at https://retrobyrem.uk
35 parts1
2 layers35.8 × 20.8 mm
TMC Breakout
resterampeberlin/TMC-Breakout
Breakout board for Trinamic TMC2xxx modules
16 parts1
2 layers35.2 × 77.2 mm
MOS6566 Adapter
RetroWizzard/MOS6566_Adapter
A MOS6566 to MOS8562 adapter
14 parts1
2 layers82.5 × 63.5 mm
Dashboard
RidhaBouyahi/Motor-Control-And-Dashboard-PCB
This Dashboard PCB is developed to get data (position,temperature...) from sensors, control actuators and Dc Motor direction and speed control using PWM .
58 parts1
2 layers18.2 × 15.5 mm
Hc05-adapter
rjhsun/hc05-ota-adapter
A simple PCB for remote Arduino programming over Bluetooth
13 parts1MIT