2 layers152.4 × 83.8 mm
Interfaces and adapters
7,328 boards- 4 layers81 × 80 mm
Breakout
nischayhegde/jetson_spi_to_can_x8_breakout
A PCB board for expanding the SPI channels on Jetson Orin nano super into 8 CANfd channels. Comes with chip select logic and jetpack drivers. Supports 1Mbit per CAN channel.
145 parts1 - 4 layers55.1 × 58 mm
LINC
noahhusby/LINC
The Laboratory Instrument Network Controller (LINC) is a modern network GPIB interface for test equipment
39 parts1CERN-OHL-P-2.0 - 2 layers19.8 × 19.2 mm
Cortex debug adapter
nobodyguy/cortex_debug_adapter
Adapts the standard 10-pin 0.05" pitch ARM Cortex JTAG/SWD connector to a 7-pin 0.1" pitch row.
5 parts1MIT - 2 layers51.6 × 31.3 mm
Adapt prog eprom fat
nobodyisinocent/PLS100-Adapter
PLS100 Adapter for ALL-03 & ALL-07 HI-LO Universal Programmer
17 parts1GPL-3.0 - 4 layers44.3 × 95.9 mm
- 4 layers60 × 85 mm
VehicleVCU PCB
nsm81/VehicleVCU_PCB
A Vehicle Control Unit provides multiple CANBUS transceivers for communication within a vehicle.
86 parts1 - 2 layers30 × 35 mm
Ht7k1401 breakout
nthuee822/project_meatball
A custom three-wheel omnidirectional robot: radial-mount wheels driven by FOC-controlled motors with magnetic angle encoders, steered by a Logitech F710 gamepad through a Raspberry Pi, with IMU-based orientation sensing…
21 parts1 - 4 layers14 × 15.6 mm
- 2 layers100 × 26 mm
- 2 layers100 × 80 mm
Adapter panelized
ojousima/kon-41.3131
Aalto university student project for constant temperature controller
25 parts1GPL-3.0 - 2 layers195 × 101.7 mm
- 2 layers27.5 × 69 mm
FlashCore
Omarbelh/FlashCore
Hybrid USB-C SPI Flash & EEPROM programmer based on CH341A and ESP32-S3.
54 parts1MIT - 4 layers77.2 × 25 mm
USB 3.1 to Ethernet
OmkarTikekar0037/usb3-gigabit-ethernet-adapter
This is a repository for version control of zoho project - USB 3.1 to Gigabit Ethernet Adapter
79 parts1 - 4 layers15 × 53 mm
Breadboard to-2mm adapter-2x20
OpenElectronicsLab/breadboard-to-2mm-adapter
2mm pitch headers adapted to 2.54 breadboard spacing
3 parts1 - 2 layers51.5 × 32 mm
Frostbyte USB hub
oSnwy/Frostbyte-USB-hub
A custom icy-themed USB 2.0 hub with USB-C and USB-A ports, built around the SL2.1A hub controller and packaged in a custom 3D-printed case.
31 parts1MIT - 2 layers65 × 30 mm
Create rpi hat
OYTIS/Create2Pi
Raspberry Pi HAT for interfacing with iRobot Create Open Interface
29 parts1 - 2 layers40 × 40 mm
Esp07-breakout
pacmancoder/esp07-breakout
ESP07 module breakout board with 3.3v LDO
12 parts1CC-BY-SA-4.0 - 4 layers160 × 100 mm
Smu main
PaulBichl/vibepcb-smu
VibePCB example: 4-quadrant SMU (+-30 V / +-1 A, USB-C PD, Ethernet) designed with an LLM
244 parts1 - 2 layers33.5 × 33 mm
BQ27621-G1 Breakout Board v1
pbdaran/BQ27621-G1
BQ27621-G1 Battery Gauge - Breakout Board and Arduino Code
19 parts1MIT - 2 layers40 × 56.1 mm
NFC Programmer
pedrotrenado/programador-NFC
Este proyecto tiene como objetivo el diseño e implementación de un sistema electrónico para la actualización del firmware de sensores a través de la tecnología NFC (Near Field Communication).
41 parts1 - 2 layers58.4 × 61 mm
Serial programmer
PegLegDino/Roku_IR_Controller
This is a literally just an infrared remote, might add a youtube video later.
22 parts1MIT - 2 layers51.5 × 63 mm
Usb hub dac
Person20020/usb-hub-dac
A simple USB hub with 3 USB C outputs and a built in DAC for a 3.5mm audio output. It uses a SL2.1a USB hub controller and a PCM2902 DAC.
46 parts1GPL-3.0 - 2 layers42 × 154 mm
Lightmotron
PeterDarley/lightmotron
A micropython project to automate neopixels via a web interface, specifically for lighting models.
15 parts1