Interfaces and adapters

7,328 boards

2 layers50 × 40 mm
STM32 CAN USB
mihircn/stm32-usb-can-fd-adapter
STM32G0B1-based USB-to-CAN FD adapter designed in KiCad.
31 parts1
2 layers80 × 70 mm
PCB RGB
MinhDangEE/Multi-mode-RGB-Mood-Lamp
An automated RGB night light system powered by STM32, featuring an OLED display, dynamic lighting effects, and a configurable sleep timer.
6 parts1
2 layers29 × 38 mm
Esp32c3-radio adapter
mithro/esp32-to-433mhz
ESP32-C3 SuperMini form-factor KiCad board with castellated headers
14 parts1Apache-2.0
2 layers20.3 × 86.4 mm
Pmod adapter
mithro/pmod-numato
Adapter for going from Numato<->Pmod multi-pmod spacing.
32 parts1CC-BY-SA-4.0
2 layers50.8 × 58.4 mm
Edge connector breakout
mokomull/c64-cartridge

3 parts1
2 layers76.2 × 133.4 mm
Programmers numpad
mothdotmonster/programmers-numpad

59 parts1CC-BY-SA-4.0
2 layers31.8 × 29.5 mm
AX25 TNC modemmodule
motivemachine/APRS_Nanomodem
My PCB design for an APRS TNC, based on Mark Qvist's excellent MicroModem design. Can be used as a standalone TNC or controlled by several serial protocols. This repo is a mirror for:
49 parts1MIT
2 layers80 × 65 mm
PixAppleV1.0
mrkingseasheep/PixApple
PixApple is designed as a RP2040 breakout board. It features 8 general use GPIOs, 1 SPI interface, 1 I2C interface, 4 ADC channels, 4 PWM channels and a CAN bus.
85 parts1GPL-3.0
2 layers25 × 27.5 mm
Lt4320-bridge drop in
mstolpner/lt4320-bridge-drop-in
A rectifier bridge drop in replacement pcb based on LT4320 ideal rectifier
15 parts1
2 layers65 × 30 mm
Rpi breakout
mtrudel/rpi-breakout
A simple Raspberry Pi pHAT to break out common interfaces & GPIO
37 parts1
4 layers
STM32F405RGT6-Breakout
MURPHYENGINEERING/STM32F405RGT6-Breakout
Following along with Phil's Lab: https://www.youtube.com/watch?v=t5phi3nT8OU
62 parts1
2 layers53.3 × 55.9 mm
Pololu AStar 32u4 Micro Adapter
Nabinho/Pololu-AStar-Micro-Adapter
Adapter PCB to Pololu AStar Micro Board.
19 parts1
2 layers61 × 78.7 mm
Teensy 3.2 Adapter
Nabinho/Teensy-3.2-OpenLog-Adapter
Adapter PCB to Teensy 3.2 Board with OpenLog module
19 parts1
2 layers150 × 150 mm
FlyingProbe
NanashiTheNameless/FlyingProbe
"FlyingProbe" is a project of mine designed to replicate those cool SD Card Debuggers.
148 parts1
2 layers41 × 40.5 mm
USBIsolator
NanashiTheNameless/USBIsolator
A simple USB Isolator board with some simple functions that I find useful!
8 parts1
4 layers50 × 20 mm
Picoarc
naorunaoru/picoarc
Use your HDMI ARC capable soundbar with your computer
72 parts1
2 layers38.5 × 49 mm
KISRAK M1
Nec0ti/KISRAK-M1
A high-performance, logic-level H-Bridge motor driver. Features discrete MOSFET design with passive hardware dead-time protection and 3.3V logic compatibility.
35 parts1AGPL-3.0
2 layers50 × 50 mm
Dm13a breakout board
neilenns/dm13a-breakout-board
Breakout board for the DM13A LED driver, for use with MobiFlight
11 parts1MIT
2 layers57.2 × 38.1 mm
Jtag breakout board
neo0x3d/jtag_breakout_board
JTAG/SWD breakout board
7 parts1MIT
2 layers131.8 × 51.8 mm
Bridge
nichtrami/led_tube
A LED Tube that works wireless and runs on a ESP32 with Arduino Framework
17 parts1Apache-2.0
2 layers45.3 × 22 mm
AAUSAT SWD via USIM adapter
nickoe/ngff_devboard
An attempt to make a M.2 module with a RF chip on it, for in in WWAN with M.2 B Key slots
7 parts1
2 layers40.6 × 27.9 mm
CH334
nicola-strappazzon/CH334
Basic projects of CH334U (HUB USB 2.0)
16 parts1
2 layers47 × 27.9 mm
CH9141K
nicola-strappazzon/CH9141
Basic projects of CH9141 (Bluetooth Serial Transparent)
11 parts1
4 layers30 × 26 mm
Catt rs485
Nicolai-Electronics/tanmatsu-addon-catt-rs485
This repository contains the hardware design files for the CATT RS-485 & RS-422 adapter.
22 parts1CERN-OHL-P-2.0