2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
32 parts1kGPL-3.0
2 layers20.3 × 86.4 mm
Pmod adapter
mithro/pmod-numato1Adapter for going from Numato<->Pmod multi-pmod spacing.
- Size
- 20.3 × 86.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 39
- Pads
- 120
- Tracks, vias
- 3,706, 318
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 15 Nov 2016
- Updated
- 27 Nov 2016
Overview
Pmod adapter is an open-source printed circuit board by mithro, from the mithro/pmod-numato repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 20.3 × 86.4 mm with 32 parts on 39 nets, routed with 3,706 tracks and 318 vias.
It belongs with the interfaces and adapters boards of this library.
README
README.mdpmod-numato
This adapter is useful for the following;
-
Adapting the "XADC" style to the "HS" style.
-
From from Numato's spacing (0.3145 inch, pin to pin) to Digilent's spacing (0.3 inch, edge to edge).
The traces in a diff pair have been length and skewed matched with a tolerance of ~1 mil.
The diff pairs as a group have been length matched to 0.8537 inches (21.6mm) long with a tolerance of 20 mil (0.5mm).
To use Numato spacing device on Digilent host;
- B side should be up.
- The XHS side should be loaded with pins.
- The XADC side should be loaded with socket.
To use Digilent spacing device on Numato host;
- A side should be up.
- The XHS side should be loaded with socket.
- The XADC side should be loaded with pins.
Board Manufacturing
-
5mil (0.127mm) trace width
-
5mil (0.127mm) trace clearance
-
12 mil (0.3048mm) drill size
-
6 mil (0.1524mm) annular ring
-
24 mil (0.6096mm) via size (6mil+12mil+6mil)
-
6 mil (0.1524) silkscreen width
This can be meet by;
License
The board is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
You should have received a copy of the license along with this work. If not, see http://creativecommons.org/licenses/by-sa/4.0/.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | PMOD-Device-x2-Type-XADC | pmod-conn_6x2:pmod_pin_array_6x2_xadc | PX1, PX2, PX3, PX4 |
| 4 | PMOD-Device-x2-Type-XHS | pmod-conn_6x2:pmod_pin_array_6x2_hs | PH1, PH2, PH3, PH4 |
The 8 most common of 32 parts.
Similar boards
- 2 layers136.8 × 54.2 mm
Retropie zero
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
32 parts915 - 2 layers
- 2 layers16 × 20 mm
ESPKey
octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller
32 parts353GPL-2.0 - 2 layers82 × 40.9 mm
Display7447
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
32 parts269 - 2 layers40 × 38 mm
Shield
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
32 parts192MIT - 2 layers47 × 39 mm
Qrss clock tx
swharden/AVR-projects
A collection of standalone AVR projects written in C
32 parts184MIT - 2 layers30.9 × 63 mm
Stm32-io extend
hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
32 parts170CC0-1.0
Questions
How big is the Pmod adapter PCB?
It measures 20.3 × 86.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pmod adapter use?
32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pmod adapter KiCad files?
From the mithro/pmod-numato repository on GitHub, at the commit this page was made from: the board is board/pmod-adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pmod adapter design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).