Skip to the content
2 layers100 × 80 mmAdapter panelized, the printed circuit board in 3D

Adapter panelized

ojousima/kon-41.31311

Aalto university student project for constant temperature controller

Size
100 × 80 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
34
Pads
87
Tracks, vias
186, 4
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
30 Jan 2015
Updated
23 Jul 2015

Overview

Adapter panelized is an open-source printed circuit board by ojousima, from the ojousima/kon-41.3131 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 80 mm with 25 parts on 34 nets, routed with 186 tracks and 4 vias.

It is built around the IRF530N-VB. Its parts include 10 connectors, 9 resistors and 6 transistors. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

README.md

kon-41.3131

Aalto university student project for constant temperature controller

Parts

25
QtyValueFootprintReferences
610kResistors_SMD:R_0805_HandSolderingR201, R203, R301, R303, R401, R403
4CONN_01X02Pin_Headers:Pin_Header_Straight_1x02P104, P105, P106, P107
31kResistors_SMD:R_0805_HandSolderingR202, R302, R402
3BC850smd_packages_fork:SOT23EBCQ201, Q301, Q401
3CONN_01X06Pin_Headers:Pin_Header_Straight_1x06P109, P110, P111
3IRF530NTransistors_TO-220:TO-220_FET-GDS_VerticalQ202, Q302, Q402
2CONN_01X12Pin_Headers:Pin_Header_Straight_1x12P101, P103
1CONN_01X01Pin_Headers:Pin_Header_Straight_1x01P108

Similar boards

  • 2 layers159.5 × 62.5 mmH Bridge KiCAD, the printed circuit board in 3D

    H Bridge KiCAD

    JoshWilbur/Electronic-Speed-Controller

    Firmware for an STM32-based H-Bridge motor controller. This project won best demonstration, UMaine ECE Class of 2025

    44 parts4
  • 2 layers155 × 140 mmControl board, the printed circuit board in 3D

    Control board

    Sergio5714/experimental-teg-testbed-firmware

    Firmware for STM32 MCU of testbed data acquisition and control system

    89 parts2
  • 2 layers558.8 × 88.9 mmOrgan, the printed circuit board in 3D

    Organ

    djfritz/pfeifenorgel

    Die Fritz-Orgel

    194 partsBSD-2-Clause
  • 2 layers275 × 185 mmDogrudan sdr D, the printed circuit board in 3D

    Dogrudan sdr D

    kocer/direct-sampling-sdr

    Direct-sampling SDR transceiver with four phase-coherent channels, and a class-A power amplifier for 1.8 to 54 MHz.

    265 parts1
  • 2 layers90.3 × 73.9 mmActionneurv0, the printed circuit board in 3D

    Actionneurv0

    Rami-Troudi/Electrique-Eurobot-IEEE-INSAT-2026

    Repo for my electrical work for the Eurobot competition

    40 parts1
  • 2 layers195.6 × 139.1 mmIsolated power, the printed circuit board in 3D

    Isolated power

    bec5-group/pid-controller

    Part Number|Power|Input|Output|Packaging -----------|-----|-----|------|--------- AD8421BR|±2.5V ±18V (2mA)|(V-)+2.3V (V+)-1.8V|(V-)+1.2V (V+)-1.6V|8-MSOP / 8-SOIC LMH6505|±3.5V ±6V (2μA)|±7mA / ±0.6V|±2.4V ±3V|8-MSOP /…

    269 parts

Questions

How big is the Adapter panelized PCB?

It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Adapter panelized use?

25 parts, built around the IRF530N-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Adapter panelized KiCad files?

From the ojousima/kon-41.3131 repository on GitHub, at the commit this page was made from: the board is adapter_board/adapter_panelized.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Adapter panelized design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).