

Organ
Die Fritz-Orgel
- Size
- 558.8 × 88.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 194
- Nets
- 118
- Pads
- 450
- Tracks, vias
- 831, 38
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 4 Sep 2026
- Updated
- 24 Oct 2026
Overview
Organ is an open-source printed circuit board by djfritz, from the djfritz/pfeifenorgel repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 558.8 × 88.9 mm with 194 parts on 118 nets, routed with 831 tracks and 38 vias.
It is built around the PIC16F887-I/PT, H11L1 and IRF530N-VB. Its parts include 52 resistors, 50 diodes, 28 capacitors, 26 connectors and 24 transistors. It belongs with the PIC boards of this library.
Main components
3PIC16F887-I/PT
TQFP-44(10x10)-40℃~+85℃ 10bit 14KB 20MHz 256Byte 2V~5.5V 35 368Byte 8 Bit Built-in FLASH PIC TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)H11L1
DIP-6-55℃~+100℃ 1 1.6mA 1Mbit/s 250mW 3V~15V 5kV DC DIP-6 Logic Output Optoisolators ROHSEverlight ElectronicsLogic Output OptoisolatorsIRF530N-VB
TO-220AB-3-55℃~+175℃ 1 N-channel 1.3nF 100V 105W 110pF 127mΩ@10V 18A 260pF 28nC@10V 4V N-Channel TO-220AB-3 MOSFETs ROHSVBsemi ElecMOSFETs
README
README.mdpfeifenorgel
Parts
194| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11, R13, R15, R17, R19, R21, R23, R25, R27, R29, R31, R33, R35, R37, R39, R41 +9 |
| 25 | Screw_Terminal_01x02 | TerminalBlock_RND:TerminalBlock_RND_205-00001_1x02_P5.00mm_Horizontal | J2, TA#3, TA#4, TA3, TA4, TB3, TB4, TC#3, TC#4, TC3, TC4, TD#3, TD#4, TD3, TD4, TE3 +9 |
| 24 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2, D10, D12, D14, D16, D18, D20, D22, D24, D26, D28, D30, D32, D34, D36, D38 +8 |
| 24 | 2200u | Capacitor_THT:C_Radial_D16.0mm_H25.0mm_P7.50mm | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25 +8 |
| 24 | 25 | Resistor_THT:R_Axial_Power_L25.0mm_W9.0mm_P27.94mm | R4, R10, R12, R14, R16, R18, R20, R22, R24, R26, R28, R30, R32, R34, R36, R38 +8 |
| 24 | IRF530N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23 +8 |
| 3 | .1u | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C2, C3, C4 |
| 2 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | .33u | Capacitor_THT:C_Rect_L7.2mm_W3.0mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 1N914 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | A#3 | LED_THT:LED_D5.0mm_Clear | D23 |
| 1 | A#4 | LED_THT:LED_D5.0mm_Clear | D47 |
| 1 | A3 | LED_THT:LED_D5.0mm_Clear | D21 |
| 1 | A4 | LED_THT:LED_D5.0mm_Clear | D45 |
| 1 | B3 | LED_THT:LED_D5.0mm_Clear | D25 |
| 1 | B4 | LED_THT:LED_D5.0mm_Clear | D49 |
| 1 | C#3 | LED_THT:LED_D5.0mm_Clear | D5 |
| 1 | C#4 | LED_THT:LED_D5.0mm_Clear | D29 |
| 1 | C3 | LED_THT:LED_D5.0mm_Clear | D3 |
| 1 | C4 | LED_THT:LED_D5.0mm_Clear | D27 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | ICSP1 |
| 1 | D#3 | LED_THT:LED_D5.0mm_Clear | D9 |
| 1 | D#4 | LED_THT:LED_D5.0mm_Clear | D33 |
| 1 | D3 | LED_THT:LED_D5.0mm_Clear | D7 |
| 1 | D4 | LED_THT:LED_D5.0mm_Clear | D31 |
| 1 | E3 | LED_THT:LED_D5.0mm_Clear | D11 |
| 1 | E4 | LED_THT:LED_D5.0mm_Clear | D35 |
| 1 | F#3 | LED_THT:LED_D5.0mm_Clear | D15 |
| 1 | F#4 | LED_THT:LED_D5.0mm_Clear | D39 |
| 1 | F3 | LED_THT:LED_D5.0mm_Clear | D13 |
| 1 | F4 | LED_THT:LED_D5.0mm_Clear | D37 |
| 1 | G#3 | LED_THT:LED_D5.0mm_Clear | D19 |
| 1 | G#4 | LED_THT:LED_D5.0mm_Clear | D43 |
| 1 | G3 | LED_THT:LED_D5.0mm_Clear | D17 |
| 1 | G4 | LED_THT:LED_D5.0mm_Clear | D41 |
| 1 | H11L1 | Package_DIP:DIP-6_W7.62mm | U2 |
| 1 | PIC16F887-IP | Package_DIP:DIP-40_W15.24mm | U3 |
| 1 | POWER | LED_THT:LED_D5.0mm_Clear | D4 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_RND:TerminalBlock_RND_205-00003_1x04_P5.00mm_Horizontal | J1 |
| 1 | uA7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
The 184 most common of 194 parts.
Similar boards
- 2 layers80 × 40 mm

- 2 layers100 × 100 mm

- 2 layers96.5 × 99.1 mm

- 2 layers77.4 × 65.2 mm

- 2 layers170 × 55 mm

Protector de Tesoro
edgranzella/Protector-de-Tesoro
Este repositorio contiene el diseño de hardware y la placa de circuito impreso (PCB) desarrollado en KiCad para el módulo central del Protector de Tesoro.
88 parts - 2 layers53 × 55.5 mm

RFID Siralama Karti
emrebrbr/RFID-Door-System-with-PIC16F887
Smart security door PIC16F887 based RFID (RC522) solution.
12 partsMIT - 2 layers

ControlTemp
fernandorasta99/PROYECTO-FINAL
Los puntos a destacar son: Realizar una placa de circuito impreso con los módulos que se utilizarán en el proyecto, para ello, es libre de realizar el diseño como mejor le convenga Puede utilizar cualquier software de…
9 parts - 2 layers160 × 100 mm

Questions
How big is the Organ PCB?
It measures 558.8 × 88.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Organ use?
194 parts, built around the PIC16F887-I/PT, H11L1 and IRF530N-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Organ KiCad files?
From the djfritz/pfeifenorgel repository on GitHub, at the commit this page was made from: the board is layout/organ.kicad_pcb and its schematic layout/organ.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Organ design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).