Skip to the content
2 layers43 × 30.5 mmBrk st1vafe3bx, the printed circuit board in 3D

KiCad hardware design files for the ProtoCentral ST1VAFE3BX biopotential AFE + 3-axis accelerometer breakout (CERN-OHL-P v2).

Size
43 × 30.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
53
Nets
37
Pads
147
Tracks, vias
289, 48
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
26 Jun 2026
Updated
26 Jun 2026

Overview

Brk st1vafe3bx is an open-source printed circuit board by Protocentral, from the Protocentral/protocentral_st1vafe3bx_hardware repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 43 × 30.5 mm with 53 parts on 37 nets, routed with 289 tracks and 48 vias.

It is built around the TSU114IQ4T, BSS138 and ESDALCL5-1BM2, with the SJ2-3593D-SMT-TR among its other parts. Its parts include 16 resistors, 10 capacitors, 5 transistors, 3 ICs and 3 connectors. It belongs with the sensors and measurement and interfaces and adapters boards of this library.

Main components

4

README

README.md

ProtoCentral ST1VAFE3BX Breakout — Hardware

ProtoCentral ST1VAFE3BX Biopotential AFE + 3-axis Accelerometer Breakout

Open-source hardware design files for the ProtoCentral ST1VAFE3BX Biopotential AFE + 3-axis Accelerometer Breakout — a single-lead ECG board based on the STMicroelectronics ST1VAFE3BX vital-signs analog front end (vAFE).

The ST1VAFE3BX combines a single-channel biopotential measurement chain with a 3-axis MEMS accelerometer in one tiny LGA package, letting you capture clean ECG while simultaneously tracking motion. This board is configured for single-lead ECG (3.5 mm jack + 3-electrode cable), adds a Qwiic connector for solderless I²C, exposes a selectable I²C / I³C / SPI header, and includes an onboard 1.8 V regulator with bidirectional level translation so it runs from any 2 V – 5 V host.

Links

Specifications

  • AFE: STMicroelectronics ST1VAFE3BX (biopotential + accelerometer)
  • Biopotential: single-lead ECG, 16-bit, via 3.5 mm jack and 3-electrode cable
  • Motion: 3-axis accelerometer, ±2 / ±4 / ±8 / ±16 g
  • Interface: I²C / I³C / SPI, selectable via JP2 / CS
  • Connectors: Qwiic (I²C), 3.5 mm ECG jack, 0.1″ 1×7 header
  • Supply: 2 V – 5 V host; onboard 1.8 V LDO with level translation

Repository layout

FolderContents
hardware/KiCad project (schematic + PCB layout) and the exported schematic PDF

License

The hardware design files in this repository are licensed under the CERN Open Hardware Licence Version 2 – Permissive (CERN-OHL-P v2). See LICENSE.

The accompanying firmware/library (in the separate protocentral_st1vafe3bx_arduino repository) is licensed under the MIT License.

Parts

53
QtyValueFootprintReferences
1210kResistor_SMD:R_0402_1005MetricR1, R2, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14
6TestPointTestPoint:TestPoint_Pad_1.0x1.0mmTP1, TP2, TP3, TP9, TP10, TP11
5BSS138Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4, Q5
21uFCapacitor_SMD:C_0805_2012MetricC5, C6
2460pCapacitor_SMD:C_0402_1005MetricC7, C8
25kResistor_SMD:R_0402_1005MetricR3, R4
2DNPCapacitor_SMD:C_0402_1005MetricC3, C4
2ESDALCL5-1BM2Diode_SMD:D_SOD-882CR1, CR2
2MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H4
1100nCapacitor_SMD:C_0402_1005MetricC2
1100nFCapacitor_SMD:C_0402_1005MetricC9
110uFCapacitor_SMD:C_0805_2012MetricC1
114.3KResistor_SMD:R_0402_1005MetricR15
115KResistor_SMD:R_0402_1005MetricR16
11uFCapacitor_SMD:C_0402_1005MetricC10
1Conn_01x07Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ4
1LOGOSparkFun-Aesthetic:qwiic_5.5mmG***
1LOGOLOGOG***
1Qwiic_RASparkFun-Connector:JST_1x04_P1.0mm_Horizontal_SMDJ2
1SJ2-3593D-SMT-TRSJ2-3593D-SMT-TR:CUI_SJ2-3593D-SMT-TRJ1
1ST1VAFE3BXTRPackage_LGA:LGA-12_2x2mm_P0.5mmU5
1SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP2
1SolderJumper_3_OpenJumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1TCR2EF18_LMCTPackage_TO_SOT_SMD:SC-74A-5_1.55x2.9mm_P0.95mmU3
1TSU114IQ4TPackage_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.1x1.1mm_ThermalViasU1

The 51 most common of 53 parts.

Similar boards

  • 2 layers38 × 10 mmRing, the printed circuit board in 3D

    Ring

    Curtisflo/swipe-smart-ring

    BLE smart ring main board — 2-layer rigid-flex KiCad PCB (nRF52832 + LSM6DSV16X IMU/Qvar). PCB layout, schematic, footprints.

    30 parts1MIT
  • 4 layers36 × 50.2 mmRacer, the printed circuit board in 3D

    Racer

    StuckAtPrototype/Racer

    These are structured into their own files. I could have used submodules, but decided against it.

    83 parts3.8kApache-2.0
  • 4 layers95 × 95 mmCube motherboard, the printed circuit board in 3D

    Cube motherboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    52 parts1.1kGPL-3.0
  • 2 layers54.6 × 70.9 mmBeagleLogic Cape, the printed circuit board in 3D

    BeagleLogic Cape

    abhishek-kakkar/BeagleLogic

    A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

    22 parts479GPL-3.0
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers21.6 × 52.3 mmPs2 pico hat, the printed circuit board in 3D

    Ps2 pico hat

    No0ne/ps2x2pico

    USB keyboard/mouse to PS/2 interface converter using a Raspberry Pi Pico

    17 parts399MIT
  • 2 layers45 × 45 mmAirCube, the printed circuit board in 3D

    AirCube

    StuckAtPrototype/AirCube

    Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

    61 parts379Apache-2.0

Questions

How big is the Brk st1vafe3bx PCB?

It measures 43 × 30.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Brk st1vafe3bx use?

53 parts, built around the TSU114IQ4T, BSS138, ESDALCL5-1BM2 and SJ2-3593D-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Brk st1vafe3bx KiCad files?

From the Protocentral/protocentral_st1vafe3bx_hardware repository on GitHub, at the commit this page was made from: the board is hardware/brk_st1vafe3bx.kicad_pcb and its schematic hardware/brk_st1vafe3bx.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Brk st1vafe3bx design in my own project?

Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).