
ArmLEDsPrototype
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

I've made myself a few of these which I'm happy to sell over at https://retrobyrem.uk
Pm breakout cart is an open-source printed circuit board by remy, from the remy/pm-breakout repository on GitHub. It is a 2-layer board of 40.2 × 46.9 mm with 35 parts on 28 nets, routed with 311 tracks and 45 vias.
It belongs with the interfaces and adapters boards of this library.
A breakout cart for the Pokemon Mini.
Features:
Recommendation if getting fabricated:
I've made myself a few of these which I'm happy to sell over at https://retrobyrem.uk

Other Pokemon Mini projects:
Licence: MIT
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | R_0201_0603Metric | Resistor_SMD:R_0201_0603Metric | bridge |
The 1 most common of 35 parts.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.




It measures 40.2 × 46.9 mm and has 2 copper layers, 1.6 mm thick.
35 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the remy/pm-breakout repository on GitHub, at the commit this page was made from: the board is pm breakout cart.kicad_pcb and its schematic pm breakout cart.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask remy before reusing the design.