2 layers65 × 30.3 mm
Interfaces and adapters
7,328 boards- 2 layers31.1 × 27.9 mm
- 2 layers118.7 × 86.4 mm
- 2 layers218.6 × 65 mm
- 2 layers15.7 × 31 mm
- 2 layers80 × 49 mm
GlasgowICAdapter
dorythecat/GlasgowICAdapter
I wanted an adapter board to be able to use my ICs with my Glasgow Interface Explorer, without having to manually connect the leads one by one. It also adds some neat features.
21 parts1AGPL-3.0 - 2 layers30 × 65 mm
Dakboard HDMI dimmer v1
DotaPie/Dakboard-HDMI-dimmer-HW
Custom Raspberry Pi HAT with a BH1750 light sensor and PIR motion sensor for automatic HDMI display dimming. KiCAD source and JLCPCB-ready gerbers. Fits any Raspberry Pi with a 40-pin header.
17 parts1EUPL-1.2 - 2 layers67 × 59.5 mm
ATX breakout
Duckle29/ATX-Power-breakout
This is a breakout board for an ATX PSU. It's meant to plug onto an RPi and offer PSU control either via the pi or an external controller.
28 parts1MIT - 2 layers45.3 × 14.8 mm
- 4 layers66.2 × 48 mm
NOVQCOREV1
Durgpratap07/NovaCore-V1
Professional open-source STM32G431 development platform featuring a 4-layer PCB, USB Type-C, modular interfaces, and production-inspired hardware design for embedded systems development.
49 parts1 - 2 layers64.9 × 89.1 mm
FV-1 EEPROM flasher hardware
e-zsche/FV-1-standalone-programmer
Standalone programmer for assembling and programming FV-1 programs onto 24LC32A EEPROMS
22 parts1 - 2 layers67.7 × 49.8 mm
- 2 layers31.8 × 38.1 mm
Pro micro breakout
Edgaru089/pro_micro_breakout
my pro micro breakout board for my dactyl manuform
10 parts1 - 4 layers90 × 95 mm
Wiegand bridge
EdgeCoil/wiegand-bridge
ESP32-S3 Wiegand reader bridge for Home Assistant: 4-layer board, BOM and ESPHome firmware.
197 parts1 - 2 layers193.5 × 95 mm
RS485 antenna switch v1.2
EI9SP/Remote-Antenna-Switch
Four to one Remote Antenna Switch, Full duplex RS485
90 parts1 - 4 layers65 × 56 mm
- 8 layers77.4 × 53.6 mm
Stm32f013 Red board
EJ-JATIMohammed/stm32-RedBoard
Custom STM32F103C8T6 development board designed with KiCad, featuring USB-C, Micro-USB, CAN, Micro-SD, SWD and GPIO interfaces.
63 parts1 - 2 layers44.5 × 26.7 mm
USBTinyV2
elbillyto/USBTinyV2
simple USB AVR programmer and SPI interface based on ATTINY45-P. designed using Kicad
14 parts1 - 2 layers19.8 × 36.1 mm
Trx4m light xiao breakout
elchue/TRX4M-Lightkit
Custom ESP32 controller to run the original Traxxas TRX-4M Pro Scale Light Kit with 3rd-party receivers (Flysky, Radiomaster) and aftermarket ESCs.
15 parts1 - 4 layers57.4 × 23.9 mm
- 4 layers51.8 × 45.1 mm
Spark rp2040-swd probe
emb3rcia/spark-rp2040-swd-probe
Open-source financialy-accesible SWD probe.
72 parts1 - 2 layers48 × 57 mm
- 4 layers15.2 × 30.5 mm
RP2040
EPSILON0-dev/RP2040-Breakout-Board
Minimal RP2040 breakout board with USB Micro-B, 16 MB QSPI flash, boot and reset buttons, and breadboard-friendly GPIO headers.
32 parts1MIT - 2 layers40.6 × 26.2 mm
Easy artnet interface
EricNakamura/easy-artnet-interface
A open-source project aiming to give access to all people a low budget and easy-to-use artnet-dmx interface node
14 parts1GPL-3.0