2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers31.8 × 38.1 mm
Pro micro breakout
Edgaru089/pro_micro_breakout1my pro micro breakout board for my dactyl manuform
- Size
- 31.8 × 38.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 27
- Pads
- 64
- Tracks, vias
- 121, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 27 Jun 2026
- Updated
- 27 Jun 2026
Overview
Pro micro breakout is an open-source printed circuit board by Edgaru089, from the Edgaru089/pro_micro_breakout repository on GitHub. It is a 2-layer board of 31.8 × 38.1 mm with 10 parts on 27 nets, routed with 121 tracks and 0 vias.
Its parts include 6 connectors and 1 IC. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Arduino_Pro_Micro | ScottoKeebs_MCU:Arduino_Pro_Micro_Flipped | U1 |
| 1 | AudioJack4 | ScottoKeebs_Components:TRRS_PJ-320A | J1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J7 |
| 1 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_01x06_Pin | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | Conn_01x12_Pin | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J4 |
The 7 most common of 10 parts.
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0
Questions
How big is the Pro micro breakout PCB?
It measures 31.8 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pro micro breakout use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pro micro breakout KiCad files?
From the Edgaru089/pro_micro_breakout repository on GitHub, at the commit this page was made from: the board is Pro_Micro_Breakout.kicad_pcb and its schematic Pro_Micro_Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pro micro breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask Edgaru089 before reusing the design.