4 layers122 × 122 mm
2 layers15.7 × 31 mm
Samd11d14 usb c
dnbdmr/samd11d14_usb-c1Breakout board for SAMD11D14AM with USB-C
- Size
- 15.7 × 31 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 30
- Pads
- 104
- Tracks, vias
- 194, 14
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Jun 2020
- Updated
- 13 Nov 2020
Overview
Samd11d14 usb c is an open-source printed circuit board by dnbdmr, from the dnbdmr/samd11d14_usb-c repository on GitHub, published under the MIT licence. It is a 2-layer board of 15.7 × 31 mm with 17 parts on 30 nets, routed with 194 tracks and 14 vias.
It is built around the ATSAMD11D14A-MU and USB4085-GF-A. Its parts include 6 resistors, 4 capacitors, 3 connectors, 2 ICs and 1 diode. It belongs with the interfaces and adapters and microcontroller boards boards and the SAM D and SAM boards of this library.
Main components
2
ATSAMD11D14A-MU
WQFN-24-EP(4x4)-40℃~+85℃ 1.62V~3.63V 10bit 12bit 16KB 22 32 Bit 48MHz 4KB ARM Cortex-M0+ Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Built-in general-purpose timer、Hardware CRC、Programmable watchdog、Calendar function、Touch function WQFN-24-EP(4x4) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
USB4085-GF-A
插件-40℃~+85℃ 1 48V 5A Black Female Right Angle Type-C USB 2.0 插件 USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
Readme.mdSAMD11D14 Breakout Board with USB-C
- .5" wide
- Through hole USB-C connector
- QFN-24 Samd11
- All pins except USB broken out
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R102, R103, R104 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C103, C104 |
| 2 | 330 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R105, R106 |
| 2 | 4.7u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C101, C102 |
| 2 | Conn_01x12_Male | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J102, J103 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R101 |
| 1 | AP2127K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U101 |
| 1 | ATSAMD11D14A-M | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U102 |
| 1 | EG5353CT-ND | Button_Switch_SMD:SW_SPST_TL3305A | SW101 |
| 1 | LED_Small | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D101 |
| 1 | USB4085-GF-A | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J101 |
Similar boards
- 2 layers60 × 51.5 mm
NanoEvery Replica
arhamrizwan2006/arduino-nano-every-pcb-replica
Chip-level PCB replica of the Arduino Nano Every (ABX00028), designed in KiCad 10 — full schematic, routing, and manufacturing files
23 parts - 4 layers20 × 55.7 mm
Qcomlt debugboard
CodeLinaro-mirror/qcomlt_debugboard
96boards specifications compliant Mezzanine used to control the DC Input, USB VBUS, PWR/RST buttons and Debug UART via a single USB2.0 CDC interface.
40 partsCERN-OHL-P-2.0 - 4 layers43.5 × 53.1 mm
- 2 layers76.2 × 76.2 mm
- 4 layers125 × 50.1 mm
- 4 layers42.3 × 51.9 mm
Vanguard new
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
93 parts915 - 2 layers35 × 20 mm
Questions
How big is the Samd11d14 usb c PCB?
It measures 15.7 × 31 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Samd11d14 usb c use?
17 parts, built around the ATSAMD11D14A-MU and USB4085-GF-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Samd11d14 usb c KiCad files?
From the dnbdmr/samd11d14_usb-c repository on GitHub, at the commit this page was made from: the board is samd11d14_usb-c.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Samd11d14 usb c design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).