

Vanguard new
New electrical repo(buggy old one)
- Size
- 43.5 × 53.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 100
- Nets
- 120
- Pads
- 408
- Tracks, vias
- 1,281, 163
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Jan 2025
- Updated
- 21 May 2025
Overview
Vanguard new is an open-source printed circuit board by SpacePicklesRocketry, from the SpacePicklesRocketry/2025-Electrical-2 repository on GitHub. It is a 4-layer board of 43.5 × 53.1 mm with 100 parts on 120 nets, routed with 1,281 tracks and 163 vias.
It is built around the ATSAMD11D14A-MU, ATMEGA4809-AF and TPS82130SIL, with the AT25DF641A-SH-T, BD1020HFV-TR and BMP390L among its other parts. Its parts include 31 resistors, 25 capacitors, 11 diodes, 10 ICs and 7 connectors. It belongs with the AVR (ATmega, ATtiny) and SAM D and SAM boards of this library.
Main components
12ATSAMD11D14A-MU
WQFN-24-EP(4x4)-40℃~+85℃ 1.62V~3.63V 10bit 12bit 16KB 22 32 Bit 48MHz 4KB ARM Cortex-M0+ Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Built-in general-purpose timer、Hardware CRC、Programmable watchdog、Calendar function、Touch function WQFN-24-EP(4x4) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)ATMEGA4809-AF
TQFP-48(7x7)-40℃~+125℃ 1.8V~5.5V 10bit 20MHz 256Byte 41 48KB 6KB 8 Bit AVR Built-in FLASH TQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)TPS82130SIL
3V to 17V Input 3A Step-Down Converter MicroSiP™ Module with Integrated InductorTexas InstrumentsUncategorisedAT25DF641A-SH-T
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 100MHz 2.5ms 2.7V~3.6V 20 Years 5uA 600ms@(64KB) 64Mbit SPI SOIC-8-208mil NOR FLASH ROHSRenesas ElectronicsNOR FLASHBD1020HFV-TR
HVSOF-5Temperature SensorsROHM SemiconductorBMP390L
LGA-10(2x2x0.5)-40℃~+85℃ 0.6pa/K 1.4uA 1.65V~3.6V 30Kpa~1.25bar 3pa 50pa I2C、SPI On-chip temperature compensation、Integrated ADC and digital interface、Standby mode、On-chip temperature output LGA-10(2x2x0.5) Pressure Sensors ROHSBosch SensortecPressure SensorsTPS61092RSA
QFN-16-EP(4x4)-40℃~+85℃@(TA) 1 1.8V~5.5V 25uA 5V 600kHz Boost Boost Built-in Fixed Yes QFN-16-EP(4x4) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedBNO055
LGA-28(3.8x5.2)-40℃~+85℃ 2.4V~3.6V 40uA I2C、UART IMU X,Y,Z X,Y,Z ±16g ±2000dps LGA-28(3.8x5.2) Accelerometers ROHSBosch SensortecAccelerometersPMEG6020ER
SOD-123W1 Independent 150uA@60V 2A 50A 530mV@2A 60V SOD-123W Schottky Diodes ROHSNexperiaSchottky DiodesSMLVN6RGB1U1
SMD2835-6P-40℃~+85℃ 0.6mm 2.8mm 3.5mm 400mW B:400mcd、R:700mcd、G:1200mcd Discrete Diode G:520nm~535nm、B:465nm~475nm、R:61nm~629nm R:2.1V、B:3.3V、G:3.3V R:50mA、G:40mA、B:40mA White Frosted Lens SMD2835-6P RGB LEDs ROHSROHM SemiconductorRGB LEDsBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
Parts
100| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C6, C7, C11, C17, C19, C20, C21, C22, C26, C27 |
| 9 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9 |
| 6 | 220 | Resistor_SMD:R_0603_1608Metric | R21, R22, R23, R24, R25, R26 |
| 5 | LED | LED_SMD:LED_0603_1608Metric | D1, D3, D5, D13, D14 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric | R27, R28, R30, R37 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R31, R32, R33 |
| 4 | 330 | Resistor_SMD:R_0603_1608Metric | R4, R11, R13, R39 |
| 4 | 4k7 | Resistor_SMD:R_0603_1608Metric | R7, R8, R9, R10 |
| 3 | 2k2 | Resistor_SMD:R_0603_1608Metric | R1, R2, R34 |
| 3 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4, J5, J6 |
| 3 | PMEG6020ER | Diode_SMD:Nexperia_CFP3_SOD-123W | D15, D16, D17 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C14, C23 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | Jumper_2_Small_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2 |
| 2 | SMLVN6RGB | LED_SMD:LED_ROHM_SMLVN6 | D7, D8 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R38 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 100u | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C13 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 22p | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 22pF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 3.3 nF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 315k | Resistor_SMD:R_0603_1608Metric | R29 |
| 1 | 32.768kHz | Crystal:Crystal_C26-LF_D2.1mm_L6.5mm_Vertical | Y1 |
| 1 | 350k | Resistor_SMD:R_0603_1608Metric | R35 |
| 1 | 4n7 | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U12 |
| 1 | AT25DF641A-SH-T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | ATSAMD11D14A-M | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U3 |
| 1 | ATmega4809-A | Package_QFP:TQFP-48_7x7mm_P0.5mm | U10 |
| 1 | BD1020HFV-TR | Package_TO_SOT_SMD:HVSOF5 | U5 |
| 1 | BMP390L | Package_LGA:ST_HLGA-10_2x2mm_P0.5mm_LayoutBorder3x2y | U4 |
| 1 | BNO055 | Package_LGA:LGA-28_5.2x3.8mm_P0.5mm | U8 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_PUI_AT-0927-TT-6-R | BZ1 |
| 1 | C | Capacitor_SMD:C_0603_1608Metric | C22 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J7 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | DMG2301L | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | LTC4412xS6 | Package_TO_SOT_SMD:TSOT-23-6 | U7 |
| 1 | Micro_SD_Card_Det1 | Connector_Card:microSD_HC_Hirose_DM3D-SF | J2 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D2 |
| 1 | SLF7055T-6R8N2R8-3PF | Inductor_SMD:L_7.3x7.3_H4.5 | L1 |
| 1 | TPS61092 | Package_DFN_QFN:Texas_RSA_VQFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm_ThermalVias | U9 |
| 1 | TPS82130 | Package_LGA:Texas_SIL0008D_MicroSiP-8-1EP_2.8x3mm_P0.65mm_EP1.1x1.9mm_ThermalVias | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_Amphenol_124019772112A | J1 |
More from SpacePicklesRocketry/2025-Electrical-2
2- 4 layers50.3 × 40 mm

- 2 layers71.2 × 68.8 mm

Similar boards
- 4 layers42.3 × 51.9 mm

Vanguard new
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
93 parts915 - 4 layers68.8 × 90.3 mm

Horizon
Horizon-Avionics/Horizon-H1
Building a fully open-source flight computer for amateur rocketry!
173 parts17 - 4 layers75.6 × 100 mm

Flight log
knivier/SkyCell
The telecommunications solution on a balloon...for broke people alike.
208 partsMIT - 2 layers40 × 40 mm

- 2 layers60 × 51.5 mm

NanoEvery Replica
arhamrizwan2006/arduino-nano-every-pcb-replica
Chip-level PCB replica of the Arduino Nano Every (ABX00028), designed in KiCad 10 — full schematic, routing, and manufacturing files
23 parts - 4 layers101.5 × 43.6 mm

Alcantara v.1.0
zenitheesc/Alcantara
Mobile Ground Station for stratospheric probe monitoring and rescue. Goes well with the Zenith Monitor app.
90 parts5 - 2 layers160.8 × 47 mm

Ecig
digitalrane/badgelife
ec0's SAO/LSAO badge addons and resources for various hacker cons #badgelife
30 parts - 2 layers297 × 132 mm

Questions
How big is the Vanguard new PCB?
It measures 43.5 × 53.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Vanguard new use?
100 parts, built around the ATSAMD11D14A-MU, ATMEGA4809-AF, TPS82130SIL and AT25DF641A-SH-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vanguard new KiCad files?
From the SpacePicklesRocketry/2025-Electrical-2 repository on GitHub, at the commit this page was made from: the board is vanguard/board versions/Vang_V2.3.4/Vanguard_new.kicad_pcb and its schematic vanguard/KiCad-DesignRules-main/JLCPCB/JLCPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vanguard new design in my own project?
Its repository states no licence, so its author keeps all rights: ask SpacePicklesRocketry before reusing the design.