
TrustM
mimok/TrustM
Breakout board for Optiga Trust M chip compatible with Raspberry Pi

mimok/TrustM
Breakout board for Optiga Trust M chip compatible with Raspberry Pi

Mircerson/Raspberry-Pi-Pico-UART-breakout
A simple 2-layer PCB making the Raspberry Pi Pico a 6 way UART adapter



Miroeilola/vallox-rs485-controller
Replacement control panel for legacy Vallox SE ventilation units. Vallox DIGIT RS-485 protocol, bus-powered, ESP32, Home Assistant.

MissouriMRDT/RoveNode
STM32 microcontroller daughterboard that supports Ethernet, CANbus, GPIO headers, status LEDs, and runs RoveOS.


MissouriMRDT/UV-Vis_Spectrometer_Hardware
Schematics and Layouts for the UV-Vis Spectrometer Board.

MissouriMRR/Cube-Breakout-Board
Breakout board for 80-Pin DF-17 connector on bottom of Cube

MITEVT/opel_driver_interface
MIT EVT's Opel GT Project Driver Interface Module. Acts as an inteface between the user and the electrical system for controlling power distribution and auxiliary peripherals.

mithro/pmod-cp2104
PMod Type 4A UART to USB interface using SiLabs CP2104

mlab-modules/BLE02
Bluetooth 4.1 controller for UART HCI-based BLE and BR/EDR communication with external host MCU.

mlab-modules/DRV8835HB01
Control two DC motors with DRV8835HB H-bridge ICs up to 2x1.5A @ 11 V

mlab-modules/I2C232V01
The base module is an integrated circuit SC18IM700, who works as a converter I2C / UART. I2C interface acts as the master. I2C can be used to speed 400kbit / Sau UART can be up to 460.8 kbit / s.

mlab-modules/I2CIO01
GPIO expander with I²C interface; 16-bit I/O, configurable ports, polarity inversion.

mlab-modules/OLED01
OLED module with SSD1306 controller, I2C interface level shifter, integrated buzzer, touchscreen, and LEDs.

mlab-modules/SIPM02
The module is electro-mechanical interface between scintillation crystal and signal processing unit.

mlab-modules/SPIEX01
SPI (bus) expander to control multiple devices from the one SPI master.


mofosyne/kicad_useful_pcbs
various small pcb boards that may be of use for various projects

mohamed-belal-10/can-motor-controller-node
CAN-connected closed-loop DC motor controller node — KiCad hardware (STM32F103, DRV8874, SN65HVD230) with an AS5600 encoder sub-PCB


mojealterego/FENG-LABORATORY
This folder contains native KiCad schematic/net-assigned PCB for an LTC3108 active power breakout, not a finalized complete industrial IoT device.
