Skip to the content
2 layers10.3 × 32.8 mmUsbarmory breakout, the printed circuit board in 3D
Size
10.3 × 32.8 mm
Copper layers
2
Parts
4
Nets
18
Pads
42
Tracks, vias
109, 3
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20220914)
Created
4 Apr 2023
Updated
4 Apr 2023

Overview

Usbarmory breakout is an open-source printed circuit board by monogon, from the monogon/usbarmory-mk2-touchscreen repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 10.3 × 32.8 mm with 4 parts on 18 nets, routed with 109 tracks and 3 vias.

Its parts include 2 resistors, 1 IC and 1 connector. It belongs with the interfaces and adapters boards of this library.

README

README.md

USB armory MkII DFR-0665 touchscreen adapter board

This is a touchscreen expansion board for USB armory MKII based on the prior design of its debug accessory. It's meant to be used with the DFR-0665 touchscreen. Due to firmware limitations, this is currently not a plug and play solution. In addition, it's provided without any implied warranties.

PCB information

PCB render

  • 2 layers, 0.80mm thickness, top only components
  • dimensions: 10.29 mm * 32.77 mm

Bill of materials

  • [R1, R2] 2x 56k OHM 1% 1/8W 0603
  • [U1] Wurth 632712000011

Backlight

You'll need to drive the backlight pin (BLK) yourself through either a pull-up or a pull-down resistor installed on the backside.

DFR-0665 materials

Parts

4
QtyValueFootprintReferences
256kResistor_SMD:R_0603_1608MetricR1, R2
1DFR-0665 headerConnector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_VerticalJ1
1USBC-PLUGusbarmory:WURTH_632712000011U1

Similar boards

  • 2 layers18.5 × 26 mm24g2usb rp2350zero, the printed circuit board in 3D

    24g2usb rp2350zero

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    4 parts1.7kApache-2.0
  • 2 layers116 × 33 mm966595-1 and 963356-1, the printed circuit board in 3D

    966595-1 and 963356-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    4 parts1.2k
  • 2 layers19 × 18 mmDaughter board, the printed circuit board in 3D

    Daughter board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    4 parts915
  • 2 layers24.8 × 24.8 mmNrf24 breakout, the printed circuit board in 3D

    Nrf24 breakout

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    4 parts803MIT
  • 2 layers26 × 20 mmCap chain, the printed circuit board in 3D

    Cap chain

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    4 parts744MIT
  • 2 layers34.7 × 20 mmXG Station Power MSI, the printed circuit board in 3D

    XG Station Power MSI

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    4 parts712CC-BY-4.0
  • 2 layers20.3 × 24.5 mmJack power input, the printed circuit board in 3D

    Jack power input

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    4 parts546MIT

Questions

How big is the Usbarmory breakout PCB?

It measures 10.3 × 32.8 mm and has 2 copper layers.

What parts does the Usbarmory breakout use?

4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Usbarmory breakout KiCad files?

From the monogon/usbarmory-mk2-touchscreen repository on GitHub, at the commit this page was made from: the board is usbarmory-breakout.kicad_pcb and its schematic usbarmory-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Usbarmory breakout design in my own project?

Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).