2 layers56 × 56 mm
2 layers74.9 × 40.6 mm
Remote dmx interface
mirdej/anyshutbeamer shutter
- Size
- 74.9 × 40.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 51
- Pads
- 208
- Tracks, vias
- 544, 28
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Jul 2024
- Updated
- 23 Jun 2025
Overview
Remote dmx interface is an open-source printed circuit board by mirdej, from the mirdej/anyshut repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 74.9 × 40.6 mm with 42 parts on 51 nets, routed with 544 tracks and 28 vias.
It is built around the ESP32-C3-MINI-1, VEML3328 and SP3485EN-Y, with the XC6220B331MR, SK6812MINI-E and 1N4148WT among its other parts. Its parts include 11 resistors, 6 capacitors, 6 ICs, 6 connectors and 4 diodes. It belongs with the interfaces and adapters boards and the ESP32 and RISC-V boards of this library.
Main components
7ESP32-C3-MINI-1
--40℃~+81℃ -89dBm 2.4GHz 350mA 3V~3.6V 82mA ESP32-C3 Chip On-board PCB Antenna UART - WiFi Modules ROHSRF CrazyWiFi Modules
VEML3328
SMD-4P-40℃~+85℃ 1.25mm 1mm 2.6V~3.6V 2mm Color Recognition I2C Red, Green, Blue, Transparent, Infrared SMD-4P Ambient Light Sensors ROHSVishay IntertechnologyAmbient Light Sensors
SP3485EN-Y
SOP-8SOP-8 RS-485 / RS-422 ICs ROHSYLPTECRS-485 / RS-422 ICs
XC6220B331MR
SOT-23-5-40℃~+85℃@(Ta) 1 25uA 3.3V 400mV@(800mA) 5.5V 50dB@(10kHz) 900mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
1N4148WT
SOD-523-55℃~+150℃ 1.25V@150mA 100V 150mA 150mW 1uA@75V 2A 4ns Independent SOD-523 Switching Diodes ROHShongjiachengSwitching Diodes
IRLML0030TRPBF
SOT-23-55℃~+150℃ 1 N-channel 1.3V 1.3W 2.6nC@10V 27mΩ 30V 382pF 39pF 5.3A SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETs
README
README.mdTHE [ a n y m a ] SHUTTER
Versatile, modular ,3D-printed, remote controlled shutter for video beamers and other light sources.
- Can be mounted to the projector in various ways
- Opens to the front or to the side
- Test button on the device
- Wireless remote control through ESP-Now over ~25m
- DMX input to the remote, no need to install cables
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 5k1 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7 |
| 3 | 100n | synkie_footprints:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C4, C6 |
| 3 | SK6812MINI | Anyma06:SK6812-MINI-HS | D1, D2, D3 |
| 2 | (22) | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R12, R14 |
| 2 | 10u | synkie_footprints:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3, C5 |
| 2 | 22 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11, R13 |
| 2 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965 | H2, H5 |
| 1 | (SP3485EN) for MERGER Mode | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | 1N4148WT | Diode_SMD:D_SMA_Handsoldering | D4 |
| 1 | 1u | synkie_footprints:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | Btn-1 | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW2 |
| 1 | Btn-2 | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW3 |
| 1 | Btn-3 | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW4 |
| 1 | Cut for MERGER Mode | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | Cut for MERGER mode | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2 |
| 1 | DMX-IN | anyma_footprints:Jack_XLR_Neutrix__3+5Pin_Male | J6 |
| 1 | DMX-OUT | anyma_footprints:Jack_XLR_Neutrik_3+5Pin_Female | J4 |
| 1 | ESP32-C3-MINI-1 | PCM_Espressif:ESP32-C3-MINI-1 | U1 |
| 1 | IRLML0030TRPBF | Package_TO_SOT_SMD:SOT-23 | Q7 |
| 1 | Prog | Anyma06:ESP-POGO-PROG-THT | J2 |
| 1 | Reset | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | SP3485EN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | USB_C_Receptacle_USB2.0 | synkie_footprints:JAE_USB-C_SJ122205 | J3 |
| 1 | VEML3328 | anyma_footprints:VEML3328SL | U6 |
| 1 | Vibro | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | XC6220B331MR | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | i2c-display128x32 | synkie_footprints:Bangood-OLED-128x32 | U3 |
| 1 | spare | anyma_footprints:ComboPinhead_03 | J5 |
Similar boards
- 2 layers57 × 64 mm
- 2 layers96 × 72 mm
Field eyes v2.before max485
louismomo66/field-eyes_pcb
Open fieldeyesv2.kicadpro in KiCad 9. The whole circuit is one flat schematic (fieldeyesv2.kicadsch): all 168 parts are on a single page, in four framed sections.
156 parts - 4 layers68 × 16 mm
- 2 layers21.3 × 28.1 mm
- 2 layers40 × 50 mm
- 2 layers46 × 46 mm
Mbadge25
Makerville/makerville-badge
Makerville Badge is a simple PCB with a OLED and a ESP32C3
63 parts6CERN-OHL-P-2.0 - 2 layers100 × 80.2 mm
Questions
How big is the Remote dmx interface PCB?
It measures 74.9 × 40.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Remote dmx interface use?
42 parts, built around the ESP32-C3-MINI-1, VEML3328, SP3485EN-Y and XC6220B331MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Remote dmx interface KiCad files?
From the mirdej/anyshut repository on GitHub, at the commit this page was made from: the board is Hardware/Electronics/remote-dmx-interface/remote-dmx-interface.kicad_pcb and its schematic Hardware/Electronics/remote-dmx-interface/remote-dmx-interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Remote dmx interface design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).