2 layers48 × 51 mm
2 layers56 × 56 mm
Anymaspot controller
mirdej/AnymaSpots- Size
- 56 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 42
- Pads
- 154
- Tracks, vias
- 292, 39
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Jan 2025
- Updated
- 29 Aug 2025
Overview
Anymaspot controller is an open-source printed circuit board by mirdej, from the mirdej/AnymaSpots repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 56 × 56 mm with 28 parts on 42 nets, routed with 292 tracks and 39 vias.
It is built around the ESP32-C3-MINI-1, XC6220B331MR and IRLML0030TRPBF, with the SK6812MINI-E among its other parts. Its parts include 6 resistors, 6 connectors, 5 capacitors, 2 ICs and 2 switches. It belongs with the ESP32 and RISC-V boards of this library.
Main components
4ESP32-C3-MINI-1
--40℃~+81℃ -89dBm 2.4GHz 350mA 3V~3.6V 82mA ESP32-C3 Chip On-board PCB Antenna UART - WiFi Modules ROHSRF CrazyWiFi Modules
XC6220B331MR
SOT-23-5-40℃~+85℃@(Ta) 1 25uA 3.3V 400mV@(800mA) 5.5V 50dB@(10kHz) 900mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
IRLML0030TRPBF
SOT-23-55℃~+150℃ 1 N-channel 1.3V 1.3W 2.6nC@10V 27mΩ 30V 382pF 39pF 5.3A SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETs
SK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdAnymaSpots
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 5k1 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4_DIN965_Pad | H1, H2, H3, H5 |
| 2 | 100n | synkie_footprints:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C4 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 1u | synkie_footprints:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 5k1 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | Conn_01x06 | Anyma06:AnymaPOGO-ESP | J2 |
| 1 | ESP32-C3-MINI-1 | PCM_Espressif:ESP32-C3-MINI-1 | U1 |
| 1 | FAN | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | IRLML0030TRPBF | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | R_Potentiometer | synkie_footprints:Potentiometer_Alps_RK09K_Single_Vertical | RV2 |
| 1 | SK6812MINI | Anyma06:SK6812-MINI-HS | D1 |
| 1 | SW_Push | synkie_footprints:Alps_Tactile_Switch | SW2 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | Temperature | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | USB_C_Receptacle_USB2.0 | synkie_footprints:JAE_USB-C_SJ122205 | J3 |
| 1 | XC6220B331MR | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | supply | Connector_BarrelJack:BarrelJack_CUI_PJ-079BH_Horizontal | J7 |
| 1 | to-spot | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
More from mirdej/AnymaSpots
1Similar boards
- 2 layers74.9 × 40.6 mm
- 2 layers57 × 64 mm
- 4 layers68 × 16 mm
- 2 layers21.3 × 28.1 mm
- 2 layers40 × 50 mm
- 2 layers46 × 46 mm
Mbadge25
Makerville/makerville-badge
Makerville Badge is a simple PCB with a OLED and a ESP32C3
63 parts6CERN-OHL-P-2.0 - 4 layers200 × 100 mm
Heteromycin
hasenbanck/heteromycin
A 3D printer board using a powerfull STM32 MCU, TMC5160/TMC2160 driver and a Raspberry Pi or compatible SBC
373 parts40 - 2 layers50 × 100 mm
Questions
How big is the Anymaspot controller PCB?
It measures 56 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Anymaspot controller use?
28 parts, built around the ESP32-C3-MINI-1, XC6220B331MR, IRLML0030TRPBF and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Anymaspot controller KiCad files?
From the mirdej/AnymaSpots repository on GitHub, at the commit this page was made from: the board is electronics/anymaspot-controller/anymaspot-controller.kicad_pcb and its schematic electronics/anymaspot-controller/anymaspot-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Anymaspot controller design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).