Computers and single-board computers

1,525 boards

2 layers80 × 110 mm
Bed mainboard pcb
arrowtip/bed-mainboard_pcb
Simple PCB for using an ESP32 board to control Neopixel-LEDs based on audio-spectrum recorded by mircrophone. Boards also includes interface for a rotary encoder and i2c devices.
33 partsMPL-2.0
6 layers120 × 40 mm
CM5Carrier
AsadImranRafique/CM5-Carrier-Board
Custom Raspberry Pi CM4/CM5 carrier board with PoE, Gigabit Ethernet, M.2 NVMe, microSD and peripheral interfaces.
54 partsApache-2.0
2 layers30.5 × 65 mm
P4-HMD
asciilifeform/P4-HMD
FPGA PCB and Linux kernel support for the Private Eye P4 head-mounted display.
18 partsGPL-3.0
8 layers75 × 75 mm
Spacex sbc
austindriggs/spacex-sbc
Complete PCB architecture and design process for a custom SBC prepared for a technical interview presentation for a PCB Design Engineer at SpaceX before I graduated from WVU.
46 parts
6 layers100 × 100 mm
Prism mainboard
AveragePillow17/P.R.I.S.M.
Portable Radio Instrument for Signal Monitoring
82 parts
2 layers194.3 × 174 mm
Motherboard
aversey/suen
A simple computer on M68k
99 parts
2 layers100 × 81 mm
Bebop mb
ballerabdude/bebop
KiCad 10 project for the Bebop Connector / motherboard board. It is the interconnect between an NVIDIA Jetson Orin Nano carrier board, a Teensy 4.1 microcontroller, a Bosch BNO085 9‑DoF IMU (Adafruit breakout), and a…
19 parts
2 layers56 × 65 mm
MainBoard V3 2
banbatakumi/AutonomousCar
自律走行ミニカー SURGE Mark.2 の STM32 ファームウェアと基板（回路）。
150 parts
2 layers94 × 55 mm
Avr basic sbc
bazsimarkus/avr-basic-sbc
An ATmega1284P-based single board computer with composite video output, PS/2 keyboard input, running Tiny BASIC.
38 parts
4 layers169 × 98.9 mm
Custom Latte Panda Mu Lite Carrier Board
BBIkal/Custom_LattePandaMu_Carrier_Board_Project
4-layer high-speed carrier board for the LattePanda Mu Intel N100 compute module, designed in KiCad.
217 parts
2 layers156.2 × 141 mm
MCU MotherBoard
bc-kim/PCB_KiCAD
Tips Footprint of the resisotor and capacitor should be assigned aforetime because assigning those are comfusing when lots of reisistor and capacitors are used. 3. Reference: https://wikidocs.net/103412
49 parts
4 layers83 × 86.5 mm
BTS MainBoard Power
bebenlebricolo/BTS-MainBoard-Power
Beer thermoregulation system mainboard - power section
94 partsGPL-3.0
2 layers112.5 × 124.5 mm
6502atty
bendooks/6502atty
6502 SBC with ATMega controller
102 parts
4 layers208 × 129 mm
Mainboard v2 r1
Benjamin-girard-1/geophys_acquisition_module
Modular ESP32-S3 geophysical data-acquisition system with custom hardware, multi-channel ADC, GNSS, IMU, removable analog sensor cards, firmware, and host tools
287 parts
4 layers190 × 110 mm
Geophys mainboard
Benjamin-girard-1/magnetometer-node-old

384 parts
4 layers38 × 35 mm
D1(Motherboard)
BenjaminJAnderson/CUBE
CUBE is a miniature, six-faced OLED display cube built from a stack of custom interconnected PCBs. The current design combines an ESP32-S2 motherboard, five further display boards, a magnet-held 3D-printed frame and…
51 partsMIT
4 layers65.4 × 36.6 mm
Sam9x60-v1
bereg-ev/linux-sbc-sam9x60
small Linux single board computer
198 parts
2 layers252.7 × 94 mm
Keyboard only
bhansconnect/rpi-cm-laptop
PCB for a Raspberry PI Compute Module based laptop.
207 parts
2 layers40.6 × 48.3 mm
Atari rs232
bnielsen1965/atarijs-server
Atari floppy drive image server.
3 parts
2 layers36 × 27 mm
Escon carrier board
Bohlebots-Sarcat/escon-carrier-board
Carrier Board for vertical mounting of the ESCON 24/2 module.
9 parts
2 layers140 × 70.5 mm
Cm4-pcb
Bohlebots-Sarcat/sarcat-cm4-pcb

44 parts
4 layers165.3 × 123.7 mm
RX8-7(WithoutOpAmps)
bradport02/RX8-Infotainment_System
An infotainment system for the Mazda RX-8 that integrates seamlessly with the climate control unit.
392 parts
2 layers290 × 280 mm
Cm5-guard A
Brico-Hams/antenaSatCommrotor
DUPLEXER 145 / 435 MHz — BNC — 25 W TARGET — REV A
158 parts
4 layers38 × 36.2 mm
Pen mixer
Brillar0101/pen-mixer
Pen-mounted motion controller: prototype and production firmware, laptop audio stack, and the production PCB as a KiCad project
32 partsMIT