
Motor MotherBoard
bc-kim/PCB_KiCAD
Tips Footprint of the resisotor and capacitor should be assigned aforetime because assigning those are comfusing when lots of reisistor and capacitors are used. 3. Reference: https://wikidocs.net/103412

Tips Footprint of the resisotor and capacitor should be assigned aforetime because assigning those are comfusing when lots of reisistor and capacitors are used. 3. Reference: https://wikidocs.net/103412
MCU MotherBoard is an open-source printed circuit board by bc-kim, from the bc-kim/PCB_KiCAD repository on GitHub. It is a 2-layer board of 156.2 × 141 mm with 49 parts on 121 nets, routed with 362 tracks and 222 vias.
It is built around the INA128PA, LM7805CT and LM7809T, with the LMC7660N, REF5050ID and B3F-1000 among its other parts. Its parts include 17 capacitors, 15 ICs, 6 connectors, 5 resistors and 2 switches. It belongs with the computers and single-board computers boards of this library.
How to manage libraries All custom libraries are included in Libraries folder at the top. The
Tips
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C29 |
| 3 | 120 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R10, R11, R12 |
| 3 | INA128PA | BC_IC_components:INA128PA | U22, U23, U24 |
| 3 | LoadCell_Click4 | BC_IC_components:LoadCell_Click4 | U15, U16, U17 |
| 3 | Mol_5264_01X05 | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | J11, J12, J13 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R8, R9 |
| 2 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C3, C4 |
| 2 | B3F-1000 | digikey-footprints:Switch_Tactile_THT_B3F-1xxx | S9, S10 |
| 2 | Connector_JST_01x03 | Connectors_JST:JST_XH_S03B-XH-A_03x2.50mm_Angled | J1, J8 |
| 2 | LM7805CT | digikey-footprints:TO-220-3 | U4, U20 |
| 1 | 0.1uF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C2 |
| 1 | 0.33uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C17 |
| 1 | BC_Nucleo446RE | BC_STM_Board:Main_NUCLEO-F446RE | U14 |
| 1 | CAN_TJA1051 | BC_IC_components:CAN_TJA1051 | U19 |
| 1 | Connector_JST_01x02 | Connectors_JST:JST_XH_S02B-XH-A_02x2.50mm_Angled | J9 |
| 1 | LM3940 | digikey-footprints:TO-220-3 | U2 |
| 1 | LM7809 | digikey-footprints:TO-220-3 | U1 |
| 1 | LMC7660 | BC_IC_components:LMC7660_THT | U21 |
| 1 | REF5050 | BC_IC_components:REF5050 | U3 |
| 1 | SDCARD_SPI | BC_IC_components:SDCARD_SPI | U18 |
The 45 most common of 49 parts.

bc-kim/PCB_KiCAD
Tips Footprint of the resisotor and capacitor should be assigned aforetime because assigning those are comfusing when lots of reisistor and capacitors are used. 3. Reference: https://wikidocs.net/103412

bc-kim/PCB_KiCAD
Tips Footprint of the resisotor and capacitor should be assigned aforetime because assigning those are comfusing when lots of reisistor and capacitors are used. 3. Reference: https://wikidocs.net/103412

bc-kim/PCB_KiCAD
Tips Footprint of the resisotor and capacitor should be assigned aforetime because assigning those are comfusing when lots of reisistor and capacitors are used. 3. Reference: https://wikidocs.net/103412



loscorpione/VFO-BFO-HF-ESP32-Si5351
VFO & BFO con Si 5351 gestito da ESP32 devkit V1 per la gamma di frequenze HF, da 1 a 30 MHZ

carmisergio/denon-preout-mod
PCB designs and firmware for the Denon AVR-X1300W Pre-out mod



mattvenn/kicad
The documentation for this workshop mostly consists of youtube screencasts. The screencasts are deliberately fast, if you need them slower then click the video's settings button and choose a slower speed.

It measures 156.2 × 141 mm and has 2 copper layers, 1.6 mm thick.
49 parts, built around the INA128PA, LM7805CT, LM7809T and LMC7660N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bc-kim/PCB_KiCAD repository on GitHub, at the commit this page was made from: the board is 1. Source/1. Motor_MotherBoardPCB/MCU_MotherBoard/MCU_MotherBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bc-kim before reusing the design.