Skip to the content
123

LM7809T

HGSEMIExtended

-20℃~+80℃@(Ta) 1 1A 35V 56dB@(120Hz) 57uV 9V Fixed Positive Short Circuit Protection、Thermal shutdown TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
hgsemi/LM7809T
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-220
Pins
3
In stock
4,210 at JLCPCB (C507141)
Used on
6 open-source boards

Overview

The LM7809T is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by HGSEMI in a TO-220 package with 3 pins. -20℃~+80℃@(Ta) 1 1A 35V 56dB@(120Hz) 57uV 9V Fixed Positive Short Circuit Protection、Thermal shutdown TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:AZ7027RTR-G1, from EasyEDA) and its footprint (EasyEDA_Cloud:TO-220-3_L10.0-W4.5-P2.54-L-1, from EasyEDA), ready for a KiCad board. 4,210 are in stock at JLCPCB (part C507141). 6 open-source boards in 6 repositories on GitHub use it.

Symbol

3OUT2GND1VCC
EasyEDA_Cloud:AZ7027RTR-G1From EasyEDA

Footprint

123
EasyEDA_Cloud:TO-220-3_L10.0-W4.5-P2.54-L-1From EasyEDA

Pinout

3
The pins of the LM7809T
PinNameType
1VCCUnspecified
2GNDUnspecified
3OUTUnspecified

Open-source boards using it

6
  • 2 layers60.8 × 99.9 mmReSeed, the printed circuit board in 3D

    ReSeed

    SukkoPera/ReSeed

    Sounds from C64 now for Plus/4!

    59 parts15
  • 2 layers126 × 59.5 mmVFO BFO Si5351, the printed circuit board in 3D

    VFO BFO Si5351

    loscorpione/VFO-BFO-HF-ESP32-Si5351

    VFO & BFO con Si 5351 gestito da ESP32 devkit V1 per la gamma di frequenze HF, da 1 a 30 MHZ

    34 parts3
  • 2 layers156.2 × 141 mmMCU MotherBoard, the printed circuit board in 3D

    MCU MotherBoard

    bc-kim/PCB_KiCAD

    Tips Footprint of the resisotor and capacitor should be assigned aforetime because assigning those are comfusing when lots of reisistor and capacitors are used. 3. Reference: https://wikidocs.net/103412

    49 parts
  • 2 layers175 × 85 mmGain box psu pcb, the printed circuit board in 3D

    Gain box psu pcb

    carmisergio/denon-preout-mod

    PCB designs and firmware for the Denon AVR-X1300W Pre-out mod

    80 parts
  • 2 layers46.7 × 53.3 mmMOSFET jr, the printed circuit board in 3D

    MOSFET jr

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    32 parts33
  • 2 layersTrial1, the printed circuit board in 3D

    Trial1

    koson/KicadProject

    123 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM7809T?

Yes. The symbol is EasyEDA_Cloud:AZ7027RTR-G1 and the footprint EasyEDA_Cloud:TO-220-3_L10.0-W4.5-P2.54-L-1, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM7809T?

TO-220, with 3 pins. Its footprint is drawn on this page.

Where is the LM7809T datasheet?

HGSEMI publishes it: the Datasheet link on this page opens it.

Where can I order the LM7809T?

JLCPCB lists it as part C507141, with 4,210 in stock; the sellers' links on this page open their listings.

What can replace the LM7809T?

Parts like it in the library: the CJ7809 by Jiangsu Changjing Electronics Technology (CJ), the MC7809CT by onsemi, the L7809CV(UMW) by UMW and the L7809CV by Minos. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM7809T?

6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.