

Prism mainboard
Portable Radio Instrument for Signal Monitoring
- Size
- 100 × 100 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 627
- Pads
- 1,178
- Tracks, vias
- 0, 0
- Pours
- 1
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 10 May 2026
- Updated
- 1 Oct 2026
Overview
Prism mainboard is an open-source printed circuit board by AveragePillow17, from the AveragePillow17/P.R.I.S.M. repository on GitHub. It is a 6-layer board of 100 × 100 mm with 82 parts on 627 nets.
It is built around the XC7Z015-2CLG485I, LMS7002M and USB3320C-EZK, with the AMS1117-1.8, PEC16-4220F-S0024 and T494D337K010AT among its other parts. Its parts include 63 capacitors, 10 ICs, 6 resistors and 2 connectors. It belongs with the radio and wireless and computers and single-board computers boards and the FPGA and CPLD boards of this library.
Main components
6XC7Z015-2CLG485I
CSBGA-485CSBGA-485 Programmable Logic Device (CPLDs/FPGAs) ROHSAMD/XILINXProgrammable Logic Device (CPLDs/FPGAs)LMS7002M
SMD-261PRF Transceiver ICsLime MicrosystemsUSB3320C-EZK
QFN-32-EP(5x5)-40℃~+85℃ 1.8V~3.3V 18uA 7.5mA Transceiver USB 2.0 QFN-32-EP(5x5) USB Converters ROHSMicrochip TechnologyUSB ConvertersAMS1117-1.8
SOT-223-40℃~+125℃@(Tj) 0.003%Vout 1 1.3V@(1A) 1.8V 15V 1A 72dB@(120Hz) Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsPEC16-4220F-S0024
插件-30℃~+70℃ 10mA 24/24 5V Incremental Straight Two-phase output Plugin Rotary Encoders ROHSBournsRotary EncodersT494D337K010AT
2917-55℃~+125℃ 10V 150mΩ 330uF ±10% 2917 Tantalum Capacitors ROHSKEMETTantalum Capacitors
README
README.mdP.R.I.S.M.
Portable Radio Instrument for Signal Monitoring.
Project layout
Hardware/
Datasheets/ Component datasheets and hardware technical manuals
CAD/
KiCAD/
prism_mainboard/ Mainboard schematic, PCB, and project backups
prism_powerboard/ Power-board project and backups
Libraries/ Symbols, footprints, models, and vendor downloads
Manufacturing/ Existing Gerber and drill exports
Exports/ Netlists, schematic PDFs, and board images
Case/ Enclosure CAD, drawings, and fabrication exports
BOM/ Bills of materials
References/ PCB and hardware design references
Software/
Vivado/
PRISM/ FPGA project and HDL source
References/ Vivado and FPGA tool documentation
Firmware/
STM32/ STM32 firmware, board support, and tests
ESP32/ ESP32 firmware, board support, and tests
ARM-Linux/
GUI/ Device user interface
GNU-Radio/ Flowgraphs, DSP modules, and GNU Radio references
Network/ Network communication applications and protocols
Docs/Open the existing projects
Keep the schematic sheets, PCB, project files, and project-local libraries together inside their existing project directories. KiCad backup archives remain alongside their projects. Vendor packages, import instructions, and model archives are under Libraries.
The Case, STM32, ESP32, GUI, and Network folders are reserved work areas. No implementation files for those areas were present in this backup. GNU-Radio currently contains saved reference material.
The mainboard's XC7Z010 footprint-library entry now uses a project-relative path. Existing personal SamacSys 3D-model references in the source PCB remain as supplied in the backup; those models were not repackaged during this folder reorganization. Vivado's stored project location was updated, and its project-relative source paths were preserved.
This reorganization changes file locations and navigation only. Schematics, PCB geometry, circuit connections, HDL, datasheets, and archived project backups were preserved. The previously generated integrated board is not part of this recovered backup.
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 470nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C12, C13, C14, C17, C18, C21, C22, C23, C26, C27, C28, C29, C32, C35, C39 +10 |
| 12 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C9, C16, C20, C25, C31, C34, C38, C40, C44, C45 |
| 6 | 47uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C19, C36, C37, C62, C63 |
| 5 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C54, C55, C58, C59, C60 |
| 4 | 100uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C24, C30, C33 |
| 4 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C50, C51, C52, C53 |
| 4 | AMS1117-1.8 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4, U5, U6, U7 |
| 4 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 2 | 20k | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R5, R6 |
| 2 | KTDM4G3C618BGIEAT | SamacSys_Parts:BGA96C80P9X16_750X1300X100 | IC1, IC2 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C57 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C56 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C61 |
| 1 | 503398-1892 | SamacSys_Parts:5033981892 | J1 |
| 1 | BLM18SG121TN1D | SamacSys_Parts:BLM18EG101TH1D | FB1 |
| 1 | GRM155R60J474KE19D | SamacSys_Parts:CAPC1005X70N | C11 |
| 1 | GRM188R60G106ME47D | SamacSys_Parts:CAPC1608X90N | C10 |
| 1 | LMS7002M | LMS7002M:AQFN261_11P5X11P5_LIM | U2 |
| 1 | PEC16-4220F-S0024 | SamacSys_Parts:PEC164120FS0012 | U3 |
| 1 | T494D337K010AT | SamacSys_Parts:T494D | C1 |
| 1 | UJ32-21-C-H-G-HMT-LT-P24-TR | LIB_UJ32-21-C-H-G-HMT-LT-P24-TR:UJ3221CHGHMTLTP24TR | J2 |
| 1 | USB3320C-EZK | SamacSys_Parts:QFN50P500X500X100-33N-D | IC3 |
| 1 | XC7Z015-2CLG485I | footprints:CLG485_XIL | U1 |
More from AveragePillow17/P.R.I.S.M.
1- 2 layers79.5 × 64 mm

Similar boards
- 6 layers91.8 × 139.8 mm

- 8 layers59.3 × 41.4 mm

UMyriad7002
myriadrf/reference-development-kit
The Myriad-RF Reference Hardware design files and firmware
186 parts49 - 4 layers256.9 × 96.2 mm

- 6 layers55 × 95 mm

- 4 layers48.5 × 33.5 mm

- 6 layers105.6 × 100.9 mm

- 10 layers90 × 60 mm

- 6 layers

Questions
How big is the Prism mainboard PCB?
It measures 100 × 100 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Prism mainboard use?
82 parts, built around the XC7Z015-2CLG485I, LMS7002M, USB3320C-EZK and AMS1117-1.8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Prism mainboard KiCad files?
From the AveragePillow17/P.R.I.S.M. repository on GitHub, at the commit this page was made from: the board is Hardware/CAD/KiCAD/prism_mainboard/prism_mainboard.kicad_pcb and its schematic Hardware/CAD/KiCAD/prism_mainboard/LMS7002M_A.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Prism mainboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask AveragePillow17 before reusing the design.