
BTS MainBoard Power
bebenlebricolo/BTS-MainBoard-Power
Beer thermoregulation system mainboard - power section

Beer thermoregulation system mainboard - power section
BTS MainBoard Power is an open-source printed circuit board by bebenlebricolo, from the bebenlebricolo/BTS-MainBoard-Power repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 83 × 86.5 mm with 94 parts on 25 nets, routed with 161 tracks and 502 vias.
It is built around the LM5109BMA, NTMFS5H419NL and SRP1270-100M, with the SS56B, 1N4148W and DMG3418L-7 among its other parts. Its parts include 17 connectors, 13 resistors, 11 capacitors, 5 transistors and 4 diodes. It belongs with the computers and single-board computers boards of this library.
Beer thermoregulation system mainboard - power section This single sided board made a 4 layers PCB stackup carries an H-bridge which drives 8 peltier modules (10x10mm, 12VDC, 6.7A each) in parallel in either direction.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19 +3 |
| 8 | FanConn | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J12, J13, J14, J15, J16, J17, J18, J19 |
| 8 | PeCon | BTS-MainBoard-Power:TE_1-1123723-2_1x02_P3.96mm_8Amps_Vertical | J4, J5, J6, J7, J8, J9, J10, J11 |
| 6 | 3.3 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R3, R4, R5, R7, R8 |
| 4 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6, C7, C9, C12 |
| 4 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C8, C11 |
| 4 | 220 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9, R10, R11, R12 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3mm_Pad_Via | H5, H6, H7, H8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_4mm_Pad_Via | H1, H2, H3, H4 |
| 4 | NTMFS5H419NL | BTS-MainBoard-Power:NTMFS5G419NL | Q2, Q3, Q4, Q5 |
| 4 | SRP1270-100M | BTS-MainBoard-Power:L_Bourns_SRP1270 | L1, L2, L3, L4 |
| 2 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R13 |
| 2 | 470uF | Capacitor_SMD:CP_Elec_10x10 | C3, C4 |
| 2 | LM5109BMA | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 2 | SS56B | BTS-MainBoard-Power:SS56B | D1, D2 |
| 1 | 0.01 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R6 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D3 |
| 1 | 22nF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C10 |
| 1 | DMG3418L | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | LED | Diode_SMD:D_0805_2012Metric | D4 |
| 1 | LOGO | BTS-MainBoard-Power-Labels:BLOs_label | G*** |
| 1 | LOGO | BTS-MainBoard-Power:BTS-LogoBW-WrappedCircle_15x15mm_silk | G*** |
| 1 | LOGO | BTS-MainBoard-Power-Labels:BoardMainLabel | G*** |
| 1 | LOGO | BTS-MainBoard-Power-Labels:ALOs_label | G*** |
| 1 | LOGO | BTS-MainBoard-Power:BTS-LogoBW-WrappedCircle_20x20mm_silk | G*** |
| 1 | LOGO | BTS-MainBoard-Power-Labels:BHOs_label | G*** |
| 1 | LOGO | BTS-MainBoard-Power-Labels:AHOs_label | G*** |
| 1 | LOGO | BTS-MainBoard-Power-Labels:FanDrive_label | G*** |
| 1 | LOGO | BTS-MainBoard-Power-Labels:GND_label | G*** |
| 1 | LogicBoardConnector | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J3 |
The 92 most common of 94 parts.

bebenlebricolo/BTS-MainBoard-Power
Beer thermoregulation system mainboard - power section


bornier-dev/bornier
Open source EtherCAT slaves for machine tools running LinuxCNC: hardware, firmware and tooling.


airiclenz/tethys
Battery-powered wireless soil-moisture sensors report to a Raspberry Pi master over a 2.4 GHz nRF24 radio link. The master decides when to water, drives the pumps/valves, and serves a real-time web dashboard - all on…

open-ephys/ephys-test-board
General purpose, automated electrophysiology test board


kt140/ECE445_SeniorDesign
This is the senior design project for Kanin Tangchartsiri, Lukas Gollings, and Wonjoon Lee.

It measures 83 × 86.5 mm and has 4 copper layers, 1.59 mm thick.
94 parts, built around the LM5109BMA, NTMFS5H419NL, SRP1270-100M and SS56B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bebenlebricolo/BTS-MainBoard-Power repository on GitHub, at the commit this page was made from: the board is Hardware/V0.2.0/BTS-MainBoard-Power.kicad_pcb and its schematic Hardware/V0.1.0/BTS-MainBoard-Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).