Skip to the content
123456

TPS22929DDBV

Texas InstrumentsExtended

-40℃~+85℃ 1 1.4V~5.5V 1.8A 115mΩ Active High Load Switch 输出放电功能、软启动、欠压锁定、反向电压保护、反向电流阻断 SOT-23-6 Power Distribution Switches ROHS

Part id
ti/TPS22929DDBV
Category
Power Distribution Switches
Package
SOT-23-6
Pins
6
In stock
9,204 at JLCPCB (C415177)
Used on
12 open-source boards

Overview

The TPS22929DDBV is a power Distribution Switche made by Texas Instruments in a SOT-23-6 package with 6 pins. -40℃~+85℃ 1 1.4V~5.5V 1.8A 115mΩ Active High Load Switch 输出放电功能、软启动、欠压锁定、反向电压保护、反向电流阻断 SOT-23-6 Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (Power_Management:TPS22929D, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 9,204 are in stock at JLCPCB (part C415177). 12 open-source boards in 10 repositories on GitHub use it.

Symbol

1VOUT2GND3ON4VIN5GND6VIN
Power_Management:TPS22929DFrom KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

From the datasheet

12
Supply, least
1.4 V · VIN, recommended operating min · p. 4
Supply, most
5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
6 V · VIN, absolute max · p. 3
Works from
-40 °C · Operating free-air temperature min · p. 3
Works up to
85 °C · Operating free-air temperature max · p. 3
Junction, hottest
125 °C · Junction temperature max · p. 3
Takes working
2.2 µA · VIN quiescent current typical, IOUT = 0, VIN = VON = 5.25 V · p. 5
Takes asleep
800 nA · VIN off supply current typical, VON = GND, VOUT open, VIN = 5.25 V · p. 5
Gives
1.8 A · Continuous switch current max at 25°C, single channel · p. 1
Junction to air (DBV)
216 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (DBV)
209 K/W · Junction-to-case (top) thermal resistance · p. 4
Junction to board (DBV)
131 K/W · Junction-to-board thermal resistance · p. 4

What it is and has

6
Load switch
Single channel, 1.8 A, SOT23-6 · p. 12
Control
Active high enable · p. 1
Slew rate
Controlled · p. 1
Protection
Under-voltage lockout · p. 1
Output discharge
Quick output discharge · p. 1
Protection
Reverse current protection · p. 1

Around it

2
cap 1-μF
between VIN and GND; Ceramic input capacitor CIN; place close to the pins. Higher capacitance can further reduce input voltage drop. · p. 14
cap CIN to CL ratio of 10 to 1
between VOUT and GND; Recommended output capacitance relationship to minimize VIN dip during startup. · p. 14

Specifications

56
ParameterConditionsAs printedPage
Input voltage range VINOver operating free-air temperature rangemin -0.3 · max 6 V3
Output voltage range VOUTOver operating free-air temperature rangemin -0.3 · max 6 V3
Input voltage range VONOver operating free-air temperature rangemin -0.3 · max 6 V3
Maximum continuous power dissipation at 25°C PMAX25°Cmax 463 mW3
Maximum continuous power dissipation at 70°C PMAX70°Cmax 254 mW3
Maximum continuous power dissipation at 85°C PMAX85°Cmax 185 mW3
Maximum continuous operating current IMAXOver operating free-air temperature rangemax 2 A3
Operating free-air temperature range TAmin -40 · max 85 °C3
Maximum junction temperature TJmax 125 °C3
Storage temperature range Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pinsmin -2 · max 2 kV4
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pinsmin -1 · max 1 kV4
Input voltage range VINmin 1.4 · max 5.5 V4
ON voltage range VONmin 0 · max 5.5 V4
High-level input voltage, ON VIHVIN = 1.4 V to 5.5 Vmin 1.1 · max 5.5 V4
Low-level input voltage, ON VILVIN = 3.61 V to 5.5 Vmax 0.6 V4
Low-level input voltage, ON VILVIN = 1.4 V to 3.6 Vmax 0.4 V4
Input Capacitor CINRefer to the application sectionmin 1 uF4
Junction-to-ambient thermal resistance RθJATPS22929D, DBV, 6 pinstyp 216 °C/W4
Junction-to-case (top) thermal resistance RθJCtopTPS22929D, DBV, 6 pinstyp 209 °C/W4
Junction-to-board thermal resistance RθJBTPS22929D, DBV, 6 pinstyp 131 °C/W4
Junction-to-top characterization parameter ψJTTPS22929D, DBV, 6 pinstyp 52 °C/W4
Junction-to-board characterization parameter ψJBTPS22929D, DBV, 6 pinstyp 110 °C/W4
Quiescent current IINIOUT = 0, VIN = VON = 5.25 V; TA = Fulltyp 2.2 · max 10 uA5
Quiescent current IINIOUT = 0, VIN = VON = 4.2 V; TA = Fulltyp 2.1 · max 7 uA5
Quiescent current IINIOUT = 0, VIN = VON = 3.6 V; TA = Fulltyp 2 · max 7 uA5
Quiescent current IINIOUT = 0, VIN = VON = 2.5 V; TA = Fulltyp 1 · max 5 uA5
Quiescent current IINIOUT = 0, VIN = VON = 1.5 V; TA = Fulltyp 0.8 · max 5 uA5
Off supply current IIN(off)VON = GND, VOUT = Open, VIN = 5.25 V; TA = Fulltyp 0.8 · max 10 uA5
Off supply current IIN(off)VON = GND, VOUT = Open, VIN = 4.2 V; TA = Fulltyp 0.3 · max 7 uA5
Off supply current IIN(off)VON = GND, VOUT = Open, VIN = 3.6 V; TA = Fulltyp 0.2 · max 7 uA5
Off supply current IIN(off)VON = GND, VOUT = Open, VIN = 2.5 V; TA = Fulltyp 0.2 · max 5 uA5
Off supply current IIN(off)VON = GND, VOUT = Open, VIN = 1.5 V; TA = Fulltyp 0.1 · max 5 uA5
Leakage current IIN(Leakage)VON = GND, VOUT = 0, VIN = 5.25 V; TA = Fulltyp 0.8 · max 10 uA5
Leakage current IIN(Leakage)VON = GND, VOUT = 0, VIN = 4.2 V; TA = Fulltyp 0.3 · max 7 uA5
Leakage current IIN(Leakage)VON = GND, VOUT = 0, VIN = 3.6 V; TA = Fulltyp 0.2 · max 7 uA5
Leakage current IIN(Leakage)VON = GND, VOUT = 0, VIN = 2.5 V; TA = Fulltyp 0.2 · max 5 uA5
Leakage current IIN(Leakage)VON = GND, VOUT = 0, VIN = 1.5 V; TA = Fulltyp 0.1 · max 5 uA5
On-resistance rONVIN = 5.25 V, IOUT = –200 mA; TA = 25°Ctyp 115 · max 150 mΩ5
On-resistance rONVIN = 5.25 V, IOUT = –200 mA; TA = Fullmax 175 mΩ5
On-resistance rONVIN = 5.0 V, IOUT = –200 mA; TA = 25°Ctyp 115 · max 150 mΩ5
On-resistance rONVIN = 5.0 V, IOUT = –200 mA; TA = Fullmax 175 mΩ5
On-resistance rONVIN = 4.2 V, IOUT = –200 mA; TA = 25°Ctyp 115 · max 150 mΩ5
On-resistance rONVIN = 4.2 V, IOUT = –200 mA; TA = Fullmax 175 mΩ5
On-resistance rONVIN = 3.3 V, IOUT = –200 mA; TA = 25°Ctyp 115 · max 150 mΩ5
On-resistance rONVIN = 3.3 V, IOUT = –200 mA; TA = Fullmax 175 mΩ5
On-resistance rONVIN = 2.5 V, IOUT = –200 mA; TA = 25°Ctyp 118 · max 155 mΩ5
On-resistance rONVIN = 2.5 V, IOUT = –200 mA; TA = Fullmax 180 mΩ5
On-resistance rONVIN = 1.5 V, IOUT = –200 mA; TA = 25°Ctyp 129 · max 170 mΩ5
On-resistance rONVIN = 1.5 V, IOUT = –200 mA; TA = Fullmax 200 mΩ5
Output pull down resistance RPDVIN = 3.3 V, VON = 0, IOUT = 30 mA; TA = 25°Ctyp 150 · max 200 Ω5
Under voltage lockout UVLOVIN increasing, VON = 3.6 V, IOUT = –100 mA; TA = Fullmax 1.4 V5
Under voltage lockout UVLOVIN decreasing, VON 3.6 V, RL = 10 Ω; TA = Fullmin 0.5 V5
ON input leakage current IONVON = 1.4 V to 5.25 V or GND; TA = Fullmax 1 uA5
Reverse Current Voltage Threshold VRVPVIN = 1.4 V to 5.5 V, TA = –40ºC to 85ºCtyp 77 mV5
Reverse Current Response Delay tDELAYVIN = 5V; TA = –40ºC to 85ºCtyp 10 us5

Pins, by the datasheet

6
1 VOUT
Switch output. · p. 3
2 GND
Ground. · p. 3
3 ON
Switch control input, active high. Do not leave floating. · p. 3
4 VIN
Switch input; bypass with a ceramic capacitor to ground. · p. 3
5 GND
Ground. · p. 3
6 VIN
Switch input; bypass with a ceramic capacitor to ground. · p. 3

Ordering codes, by the datasheet

9
TPS22929DDBVR
SOT-23 (DBV) · 3000, LARGE T&R; lead finish NIPDAU | SN; -40 to 85°C · p. 20
TPS22929DDBVR.A
SOT-23 (DBV) · 3000, LARGE T&R; lead finish NIPDAU; -40 to 85°C · p. 20
TPS22929DDBVR.B
SOT-23 (DBV) · 3000, LARGE T&R; lead finish NIPDAU; -40 to 85°C · p. 20
TPS22929DDBVRG4
SOT-23 (DBV) · 3000, LARGE T&R; lead finish NIPDAU; -40 to 85°C · p. 20
TPS22929DDBVRG4.A
SOT-23 (DBV) · 3000, LARGE T&R; lead finish NIPDAU; -40 to 85°C · p. 20
TPS22929DDBVRG4.B
SOT-23 (DBV) · 3000, LARGE T&R; lead finish NIPDAU; -40 to 85°C · p. 20
TPS22929DDBVT
SOT-23 (DBV) · 250, SMALL T&R; lead finish NIPDAU; -40 to 85°C · p. 20
TPS22929DDBVT.A
SOT-23 (DBV) · 250, SMALL T&R; lead finish NIPDAU; -40 to 85°C · p. 20
TPS22929DDBVT.B
SOT-23 (DBV) · 250, SMALL T&R; lead finish NIPDAU; -40 to 85°C · p. 20

Open-source boards using it

12See all 12
  • 4 layers160 × 100 mmRosco m68k, the printed circuit board in 3D

    Rosco m68k

    rosco-m68k/rosco_m68k

    Design, documentation and software for the Really Old School Computer (M68K)

    140 parts200
  • 4 layers86.4 × 54.6 mmRoboCape, the printed circuit board in 3D

    RoboCape

    PREDICT-EPFL/RoboCape

    This repository is dedicated to a Beaglebone cape extension developped at EPFL in the Automatic Control Laboratory.

    114 parts4
  • 2 layers80 × 79 mmMM Power Subsystem, the printed circuit board in 3D

    MM Power Subsystem

    ALECIA13/EEE3088F-2025

    This repository contains the Power Module for a Micro-Mouse robot project, developed as part of the EEE3088F (2025) course.

    110 parts
  • 2 layersDigital waters, the printed circuit board in 3D

    Digital waters

    atop8918/DigitalWaters_WD

    Digital Waters Water Monitoring Device hardware

    20 parts
  • 4 layers188.5 × 82 mmDigital waters, the printed circuit board in 3D

    Digital waters

    atop8918/DigitalWaters_WD_prototype

    Simplified Schematic for prototype release

    118 partsMIT
  • 4 layers49 × 35.5 mmYoyo, the printed circuit board in 3D

    Yoyo

    bristlemouth/bm_yoyo

    Bristlemouth YoYo PCB Design

    51 parts
  • 4 layers77.2 × 55.1 mmNeon beat buzzer pcb, the printed circuit board in 3D

    Neon beat buzzer pcb

    neon-beat/neon-beat-buzzer-pcb

    Electronic design for the Neon Beat buzzer

    66 partsGPL-3.0
  • 2 layers76.2 × 50.8 mmPowerCircuit, the printed circuit board in 3D

    PowerCircuit

    usandakahle/DesignProject

    Kicad, schematics EEE3088F

    63 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS22929DDBV?

Yes. The symbol is Power_Management:TPS22929D and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS22929DDBV?

SOT-23-6, with 6 pins. Its footprint is drawn on this page.

Where is the TPS22929DDBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS22929DDBV?

JLCPCB lists it as part C415177, with 9,204 in stock; the sellers' links on this page open their listings.

What can replace the TPS22929DDBV?

Parts like it in the library: the TPS22918DBV by Texas Instruments, the TPS2553DBV by Texas Instruments, the AP2553W6 by Diodes Incorporated and the TPS27081ADDC by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS22929DDBV?

12 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.