2 layers59.1 × 49.1 mm
Open-source KiCad boards
138 match “custom-ds”Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers17.4 × 53.1 mm
PtConfig
custom-ds/ptConfig
A configuration cable for the ptFlex, ptSolar, and ptSolarHF trackers, capable of configuring and supplying power.
13 partsGPL-3.0 - 2 layers36.6 × 14.5 mm
- 4 layers85 × 55 mm
- 2 layers30 × 52 mm
Raspi ir
custom-ds/Universal-Remote-LIRC
Build a universal remote control using a Raspberry Pi with the LIRC library
32 partsGPL-3.0 - 4 layers85 × 55 mm
- 4 layers85 × 55 mm
- 2 layers103 × 95 mm
DSO
Aryan-Kodan/Two_Channel_DSO
A custom Multi-Channel Digital Storage Oscilloscope (DSO) designed using the STM32F103C8T6 microcontroller. This project combines a custom analog front-end, trigger circuitry, anti-alias filtering, multi-channel…
94 parts - 2 layers65.3 × 41.6 mm
Dsc interface pcb
Dilbert66/esphome-dsckeybus
Esphome custom configuration for interfacing to a DSC POWERSERIES alarm system
16 parts305 - 4 layers59.5 × 58.6 mm
Custom stm32f405 4layer
DsThakurRawat/PCB-AND-CHIP-DESIGN-WITH-AIML
All production files have been generated in manufacturing/: - Gerber Layers (RS-274X): Copper, solder masks, silkscreen, and board edge cuts (manufacturing/gerbers/) - Excellon Drill Files: Plated and non-plated drill…
50 parts - 2 layers24.4 × 21.7 mm
TMP117 custom board
rtek1000/Datalogger_2039
This is an 8-channel logger for collecting temperature data (431 160 readings). Data export via USB Flash Drive (Pendrive).
14 parts4 - 2 layers62.8 × 57.4 mm
TMP117 custom board panelize
rtek1000/Datalogger_2039
This is an 8-channel logger for collecting temperature data (431 160 readings). Data export via USB Flash Drive (Pendrive).
56 parts4 - 2 layers24.5 × 73.5 mm
PtSolar Breakout
custom-ds/ptSolar
Under the hood, the ptSolar runs on the same Microchip ATMega328p microcontroller that the other trackers have been using for years, although this board runs at a lower 3.3 volt level, and a slower 8MHz clock speed.
18 partsGPL-3.0 - 2 layers62 × 83 mm
Vehicle Power Switch
custom-ds/Vehicle-Auto-On
With the Arduion programmer board loaded with the jtag2updi software, and the Pin 6 from the Arduino connected to the Reset line on the ATTiny404, you can Build and Program directly inside of the Visual Studio Code.
49 partsGPL-3.0 - 2 layers27 × 10 mm
I2c trrs
twangodev/dsk
The developer's split keyboard (dsk) is an open-source, ergonomic, and customizable keyboard for developers.
3 partsCERN-OHL-S-2.0 - 2 layers70 × 21 mm
Encoder daughterboard
twangodev/dsk
The developer's split keyboard (dsk) is an open-source, ergonomic, and customizable keyboard for developers.
9 partsCERN-OHL-S-2.0 - 2 layers11.2 × 7.9 mm
- 2 layers12.3 × 7.9 mm
- 2 layers88 × 60 mm
DSO Final
ahmedkamel382/STM32-Oscilloscope
A custom Digital Storage Oscilloscope (DSO) built with an STM32F401 Black Pill and a custom PCB. Features a 1.47" SPI display, an analog front-end with hardware over-voltage protection, and real-time DSP for waveform…
25 parts - 2 layers138.1 × 114.3 mm
Left
twangodev/dsk
The developer's split keyboard (dsk) is an open-source, ergonomic, and customizable keyboard for developers.
90 partsCERN-OHL-S-2.0 - 2 layers138.1 × 95.3 mm
Pad
twangodev/dsk
The developer's split keyboard (dsk) is an open-source, ergonomic, and customizable keyboard for developers.
71 partsCERN-OHL-S-2.0 - 4 layers38.5 × 73.5 mm
PtSolar
custom-ds/ptSolar
Under the hood, the ptSolar runs on the same Microchip ATMega328p microcontroller that the other trackers have been using for years, although this board runs at a lower 3.3 volt level, and a slower 8MHz clock speed.
70 partsGPL-3.0 - 2 layers77.6 × 54.6 mm
Mini Keybord PCB
dsouldatos/mini-hackpad
A compact custom mini keyboard featuring four mechanical switches and a rotary encoder. I designed the PCB and 3D-modeled the custom enclosure from scratch, including mounting points and openings for the USB port.
13 parts - 2 layers49 × 34 mm
