6 layers60 × 55 mm
PoE Ethernet GPIB Adapter
Kofen/PoE_Ethernet_GPIB_Adapter
This folder contains the necessary hardware files for the PoE Ethernet GPIB Adapter project.
198 parts120GPL-3.0
2 layers17.4 × 53.1 mm
PtConfig
custom-ds/ptConfigA configuration cable for the ptFlex, ptSolar, and ptSolarHF trackers, capable of configuring and supplying power.
- Size
- 17.4 × 53.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 19
- Pads
- 54
- Tracks, vias
- 71, 43
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 26 Apr 2026
- Updated
- 26 Apr 2026
Overview
PtConfig is an open-source printed circuit board by custom-ds, from the custom-ds/ptConfig repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 17.4 × 53.1 mm with 13 parts on 19 nets, routed with 71 tracks and 43 vias.
It is built around the CH340X. Its parts include 4 connectors, 2 capacitors, 2 resistors, 2 diodes and 1 IC.
Main components
1README
README.mdptConfig
The ptConfig is a USB Micro powered serial adapter cable, capable of supplying power and configuring a ptSolar, ptSolarHF, and the newest models of ptFlex trackers..
The Circuit Board
The circuit board is designed in Kicad and features a 2-layer design.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R6 |
| 2 | 6 Pin Male Header | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1, J4 |
| 2 | Green | Diode_SMD:D_0805_2012Metric | D1, D2 |
| 1 | CH340X | Package_SO:MSOP-10_3x3mm_P0.5mm | U1 |
| 1 | Polyfuse | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | Programming | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Reset Switch | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J3 |
Questions
How big is the PtConfig PCB?
It measures 17.4 × 53.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PtConfig use?
13 parts, built around the CH340X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PtConfig KiCad files?
From the custom-ds/ptConfig repository on GitHub, at the commit this page was made from: the board is ptConfig/ptConfig.kicad_pcb and its schematic ptConfig/ptConfig.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PtConfig design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers36.4 × 18.9 mm
- 2 layers100 × 100 mm
Zxevo1010 main
UzixLS/zxevo1010-board
10x10cm PCB variant of ZX-Evolution project for G738/G706 enclosure
252 parts26 - 4 layers100 × 100 mm
GammaSpectrometer
RobertGawron/GammaSpectrometer
Device for quantitative analyze energy spectra of gamma-ray sources. Allows to study what radioactive isotopes in what quantities are present in measured sample.
326 parts16MIT - 4 layers102 × 100 mm
Zelvicka
RoboticsBrno/Robutek
Robůtek je robotická platforma založená na čipu ESP32-S3. Je velice rozšitiřelný, ale ze základu umí jezdit, kreslit fixou, jezdit po čáře, pohybovat se bludištěm. Programování je přes Jaculus.
214 parts12 - 2 layers20 × 47.3 mm
ADAPTER PCB
OxMarco/ethereum-lora
A long-range low-power radio interface for Ethereum nodes
17 parts10MIT - 2 layers150 × 68 mm
- 4 layers46 × 100 mm
