Open-source KiCad boards

26 match “Hob-dev”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

2 layers18.6 × 56.6 mm
OrthusSharp
Hob-dev/Orthus
A highly portable split keyboard focused on feeling and sound.
16 parts1
2 layers36.4 × 36.4 mm
OrthusTrackpad
Hob-dev/OrthusTrackpad
The trackpad for the Orthus split keyboard. Easily modifiable+ good resource for trackpad design.
16 parts2
2 layers319 × 95.6 mm
Orthus
Hob-dev/Orthus
A highly portable split keyboard focused on feeling and sound.
336 parts1
2 layers94.4 × 72.4 mm
Pockey
Hob-dev/Pockey
A play on the word "Pocket", this keyboard is meant to be ultra-portable ultra-low profile using Cherry ULP, with a magnetic enclosure mechanism that let's you fit the keyboard in your pocket.
57 parts1
2 layers110.5 × 90.8 mm
TeslaSMPS
devfabiosilva/TeslaSMPS
DIY: High Voltage Range Switching Mode Power Supply for Embedded and Solar systems
112 parts7Unlicense
2 layers30.5 × 57 mm
Sequence Controller
ericgu/Fade
Fade is an ESP32-based animation system. It can drive WS2812/Neopixel addressable LEDs, PWM-based devices (LEDs or anything else that supports PWM), and hobby servo motors.
12 parts57
4 layers25.4 × 58.5 mm
Shrike lite
vicharak-in/shrike
Low cost microcontroller + FPGA board for makers , hobbyist and student for endless possibility.
60 parts537GPL-2.0
4 layers25.4 × 58.5 mm
Shrike lite
vicharak-in/shrike
Low cost microcontroller + FPGA board for makers , hobbyist and student for endless possibility.
60 parts537GPL-2.0
2 layers160 × 100 mm
EPM7128S Dev Board
lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus
98 parts15
2 layers51.5 × 28 mm
Programming jig
psten/pd-buddy-sink
This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.
9 parts1
4 layers96.5 × 81.3 mm
Hexapod PCB KiCad Project
Aecert-Robotics/Hexapod
A hexapod powered by Arduino using hobby servos
48 parts15GPL-3.0
2 layers40.6 × 109.3 mm
ENGR302
RedHoodedWraith/Group6-Rocket-ENGR301-302
An in-class group project centered around developing a hobbyist rocket. This was developed by students in Group 6 from the ENGR301 & ENGR302 courses at the Victoria University of Wellington (NZ) in 2020.
31 parts
2 layers160 × 100 mm
SAB80535-Dev Board
lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus
100 parts15
2 layers110 × 91 mm
LedStripDriver
ptabor/ledStrip
Hobby project of (3-channel) addressable led-strips controller PCB and arduino
55 parts1
2 layers106.7 × 90.2 mm
Smart aquarium guardian
martinquattro/SmartAquariumGuardian
Smart Aquarium Guardian is an ESP32-based IoT aquarium monitoring and automation system for hobbyists and small-scale aquariums.
29 parts1MIT
2 layers78.8 × 71.9 mm
EE496
Will946/CPRPal
Chest compressions are hard to gauge mid-panic. This device measures force, rate, and posture in real time so you don't have to guess.
68 parts1MIT
2 layers295 × 80 mm
Front panel.processor
lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus
40 parts15
4 layers30 × 37.2 mm
Pd buddy sink
psten/pd-buddy-sink
This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.
43 parts1
2 layers200 × 160 mm
SAB80535-Dev Board
lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus
187 parts15
2 layers125.6 × 53.6 mm
Circuit 2
mekatronik-achmadi/ublik
I’m doing a free customizable and developer-friendly mini Solar Home System (just a hobby, won’t be big and professional like many vendors nowadays)
68 parts
2 layers109.5 × 50.1 mm
Circuit 0
mekatronik-achmadi/ublik
I’m doing a free customizable and developer-friendly mini Solar Home System (just a hobby, won’t be big and professional like many vendors nowadays)
86 parts
2 layers110 × 110 mm
ZEReader Pico
Allegra42/ZEReader-KiCad
ZEReader is an open source hardware and software E-Book Reader platform. Originally developed as a bachelor's thesis in electrical engineering, the project now evolves as a hobby initiative dedicated to further develop…
100 parts70CERN-OHL-S-2.0
2 layers235 × 160 mm
Input output.PropESP32
lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus
127 parts15
2 layers46.8 × 45.5 mm
Module
RamRamAndroid/ESP32Drone-CodeMatrix
ESP32 Drone by CodeMatrix is a compact, WiFi-controlled drone based on the ESP32-S3 microcontroller. Designed for hobbyists, makers, and engineers, ESP32 Drone by CodeMatrix offers a simple yet powerful platform for…
45 parts1